Date: Sat, 16 Oct 2010 23:01:19 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Subject: Re: usb doesn't work Message-ID: <201010162301.19179.hselasky@c2i.net> In-Reply-To: <AANLkTi=e=tuQfA8BPJ2xzUmipPRy15Qz2iD9AwFg=ZHm@mail.gmail.com> References: <AANLkTi=KoL=OsXTm9FkixNS_xdfEygSCoJ7%2B_UdbOEjN@mail.gmail.com> <201010150916.45906.hselasky@c2i.net> <AANLkTi=e=tuQfA8BPJ2xzUmipPRy15Qz2iD9AwFg=ZHm@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This sounds like an ACPI problem. Does your hardware have ACPI? --HPS On Saturday 16 October 2010 19:35:02 rufina sarvarova wrote: > It looks like FreeBSD's pci bus code is failing to assign resources. > What can I do with it? > > *dmesg* > ohci0: <ATI SB400 USB Controller> mem 0x80000000-0x80000fff irq 19 at > device 19.0 on pci0 > ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 51 > ohci0: [MPSAFE] > ohci0: [ITHREAD] > usbus0: <ATI SB400 USB Controller> on ohci0 > ohci1: <ATI SB400 USB Controller> mem 0x80000000-0x80000fff irq 19 at > device 19.1 on pci0 > ohci1: Could not map memory > device_attach: ohci1 attach returned 6 > ehci0: <ATI SB400 USB 2.0 controller> mem 0x80000000-0x80000fff irq 19 at > device 19.2 on pci0 > ehci0: Could not map memory > device_attach: ehci0 attach returned 6 > > > *pciconf:* > ohci0@pci0:0:19:0: class=0x0c0310 card=0xd6018086 chip=0x43741002 rev=0x80 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB400 OHCI USB Controller' > class = serial bus > subclass = USB > > ohci1@pci0:0:19:1: class=0x0c0310 card=0xd6018086 chip=0x43751002 rev=0x80 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB400 OHCI USB Controller' > class = serial bus > subclass = USB > > ehci0@pci0:0:19:2: class=0x0c0320 card=0xd6018086 chip=0x43731002 rev=0x80 > hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB400 EHCI USB 2.0 Controller' > class = serial bus > subclass = USB > > On Fri, Oct 15, 2010 at 11:16 AM, Hans Petter Selasky <hselasky@c2i.net>wrote: > > On Thursday 14 October 2010 21:10:21 rufina sarvarova wrote: > > > Hello, > > > I can't find out what's wrong with my configs/computer.. > > > All my USB devices doesn't work in freebsd 8.1. I had windows/ubuntu at > > > this computer and all works well. > > > But here.. At bios usb enable, before loading freebsd usb indicator > > > light-on, but during loading it's turns off. > > > my dmesg here: > > > > > > usbus0: <ATI SB400 USB Controller> on ohci0 > > > usbus0: 12Mbps Full Speed USB v1.0 > > > ugen0.1: <ATI> at usbus0 > > > uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > > > uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > > > usbus0: Root HUB problem, error=USB_ERR_NO_ROOT_HUB > > > > > > System does not see any usb devices. > > > > > > at rc.conf I enabled hald and dbus.. > > > > Try to boot with verbose. Probably an error happens during OHCI attach, > > and then the driver aborts. You can also try -current as of today. > > > > --HPS > > _______________________________________________ > freebsd-usb@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-usb > To unsubscribe, send any mail to "freebsd-usb-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201010162301.19179.hselasky>