Date: Thu, 8 Nov 2007 10:12:07 +0100 From: "Rene Ladan" <r.c.ladan@gmail.com> To: "Alexandre Sunny Kovalenko" <alex.kovalenko@verizon.net> Cc: Bachilo Dmitry <root@solink.ru>, current@freebsd.org, mobile@freebsd.org Subject: Re: PCI Cardreader Message-ID: <e890cae60711080112u6235ebecg67bd7fa4ec4631e8@mail.gmail.com> In-Reply-To: <47324808.2090900@gmail.com> References: <200711071056.13466.root@solink.ru> <47322A66.9050505@gmail.com> <1194474110.2904.23.camel@RabbitsDen> <47324808.2090900@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
2007/11/8, Rene Ladan <r.c.ladan@gmail.com>: > Alexandre "Sunny" Kovalenko schreef: > > On Wed, 2007-11-07 at 22:13 +0100, Rene Ladan wrote: > >> Bachilo Dmitry schreef: > >>> Hello all. > >>> I always used USB cardreaders and had no problem with it, but now in my > >>> notebook I have a cardreader, that appears to be onboard PCI device. And so > >>> FreeBSD sees it as this: > >>> pci6: <memory, flash> at device 4.1 (no driver attached) > >>> pci6: <base peripheral> at device 4.2 (no driver attached) > >>> pci6: <memory, flash> at device 4.3 (no driver attached) > >>> pci6: <memory, flash> at device 4.4 (no driver attached) > >>> > >>> > >>> That's even more odd because three are recognized as flash and one is not. > >>> pciconf -lv shows this: > >>> > >>> none13@pci6:4:1: class=0x050100 card=0x009f1025 chip=0x05301524 > >>> rev=0x01 hdr=0x00 > >>> vendor = 'ENE Technology Inc' > >>> device = 'PCI Memory Stick Card Reader Controller' > >>> class = memory > >>> subclass = flash > >>> > >>> Well, in 7.0-CURRENT it showed all four devices and now in BETA-2 only this > >>> one. > >>> > >> On my 8.0-CURRENT box (20071105) it shows all four devices: > >> > >> cbb0@pci0:4:1:0: class=0x060700 card=0x14371043 chip=0x04761180 rev=0xb3 hdr=0x02 > >> vendor = 'Ricoh Company, Ltd.' > >> device = 'unknown Ricoh R/RL/5C476(II)' > >> class = bridge > >> subclass = PCI-CardBus > >> fwohci0@pci0:4:1:1: class=0x0c0010 card=0x14371043 chip=0x05521180 rev=0x08 hdr=0x00 > >> vendor = 'Ricoh Company, Ltd.' > >> device = 'RL5c552 IEEE-1394 Controller' > >> class = serial bus > >> subclass = FireWire > >> none0@pci0:4:1:2: class=0x080500 card=0x14371043 chip=0x08221180 rev=0x17 hdr=0x00 > >> vendor = 'Ricoh Company, Ltd.' > >> device = 'R5C832, R5C843 SDA Standard Compliant SD Host Controller' > >> class = base peripheral > >> none1@pci0:4:1:3: class=0x088000 card=0x14371043 chip=0x05921180 rev=0x08 hdr=0x00 > >> vendor = 'Ricoh Company, Ltd.' > >> device = '13871043 Ricoh Memory Stick Host Controller' > >> class = base peripheral > >> > >>> Is there any way I can make them work? > >>> > >> You can add these lines to your kernel configuration: > >> > >> device mmc > >> device mmcsd > >> > >> But don't expect any magic. mmc(4) and mmcsd(4) tell that nothing currently works, > >> which seems to be true on my Asus A6JE (using a Kingston micro-SD card with adapter). > >> > >> imp@ is the last person who touched the driver which lives in /usr/src/sys/dev/mmc/ > >> > > Thing below is on my list to try out when I get enough breathing room > > (or when I would have a dire need to read SD cards on my ThinkPad > > X60 ;). Did you, by any chance, try it? Any experiences to share? > > > > http://www.freebsd.org/cgi/getmsg.cgi?fetch=17399+21119 > > +/usr/local/www/db/text/2007/freebsd-mobile/20070916.freebsd-mobile > > > Not yet, I didn't see the message until now since I'm not (yet) on the mobile list. > A quick try showed that it does not compile on my box. I'll investigate why. > The author did not leave an email address in the files. > The short story is bus_setup_intr() gained some parameters, I'll figure out which. According to a blog at bsdimp.blogspot.com, Ricoh based readers should work with this driver :) > Regards, > Rene > -- > GPG fingerprint = E738 5471 D185 7013 0EE0 4FC8 3C1D 6F83 12E1 84F6 (subkeys.pgp.net) > > "It won't fit on the line." > -- me, 2001 > > -- GPG fingerprint = E738 5471 D185 7013 0EE0 4FC8 3C1D 6F83 12E1 84F6 (subkeys.pgp.net) "It won't fit on the line." -- me, 2001
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?e890cae60711080112u6235ebecg67bd7fa4ec4631e8>