Date: Mon, 25 Feb 2013 09:36:07 -0500 (EST) From: Daniel Eischen <eischen@vigrid.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-current@freebsd.org Subject: Re: USB not working Message-ID: <Pine.GSO.4.64.1302250935310.11838@sea.ntplx.net> In-Reply-To: <Pine.GSO.4.64.1302250930520.11838@sea.ntplx.net> References: <Pine.GSO.4.64.1302241423150.8338@sea.ntplx.net> <201302250938.23012.hselasky@c2i.net> <Pine.GSO.4.64.1302250859110.11714@sea.ntplx.net> <201302251518.04798.hselasky@c2i.net> <Pine.GSO.4.64.1302250930520.11838@sea.ntplx.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 25 Feb 2013, Daniel Eischen wrote: > On Mon, 25 Feb 2013, Hans Petter Selasky wrote: > >> On Monday 25 February 2013 15:01:24 Daniel Eischen wrote: >>> On Mon, 25 Feb 2013, Hans Petter Selasky wrote: >>>> Try to set: >>>> >>>> sysctl hw.usb.xhci.xhci_port_route=-1 >>>> >>>> In /boot/loader.conf >>>> >>>> I see you have a Pantherpoint chipset, and those have special port >>>> routing features. >>> >>> Thanks, that didn't help. >>> >>> $ sysctl hw.usb.xhci.xhci_port_route >>> hw.usb.xhci.xhci_port_route: 1 >>> >> >> It should be minus one. > > Oops, that blended right in with the '='. I just tried -1 and it > didn't work: > > $ sysctl hw.usb.xhci.xhci_port_route > hw.usb.xhci.xhci_port_route: -1 > > Feb 25 09:28:25 rigel kernel: xhci_do_command: Command timeout! > Feb 25 09:28:25 rigel kernel: usb_alloc_device: device init 2 failed > (USB_ERR_TIMEOUT, ignored) > Feb 25 09:28:25 rigel kernel: ugen0.2: <Unknown> at usbus0 (disconnected) > Feb 25 09:28:25 rigel kernel: uhub_reattach_port: could not allocate new > device > > Should I reboot just to start fresh? That didn't help either. -- DE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.64.1302250935310.11838>