Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 31 Dec 2012 17:28:33 -0800
From:      hiren panchasara <hiren.panchasara@gmail.com>
To:        Ian Lepore <freebsd@damnhippie.dyndns.org>
Cc:        freebsd-arm <freebsd-arm@freebsd.org>
Subject:   Re: Rpi boot process stuck on mountroot
Message-ID:  <CALCpEUEVZz24VTHJVFTHET2=r3vb1RfFawdP-8=ULfaGoFTppg@mail.gmail.com>
In-Reply-To: <1357002062.54953.135.camel@revolution.hippie.lan>
References:  <CALCpEUGXc_Dp=BG5dTLBkMR3P30kgNnzpWzHuW2Xx-Qs0XjZvw@mail.gmail.com> <1357002062.54953.135.camel@revolution.hippie.lan>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Dec 31, 2012 at 5:01 PM, Ian Lepore
<freebsd@damnhippie.dyndns.org> wrote:
> On Mon, 2012-12-31 at 16:42 -0800, hiren panchasara wrote:
>> Hi All,
>>
>> I am using Tim Kientzle's scripts and have been harassing him with
>> stupid questions.
>> Many thanks to him for his work.
>>
>> I am LX Series 8gig Class 10 sd card with Tim's most current scripts
>> and -head as my sources.
>>
>> dmesg on attaching the card:
>>
>> mmc0: <MMC/SD bus> on sdhci0
>> mmcsd0: 7600MB <SDHC SD08G 3.0 SN -1341241004 MFG 06/2012 by 39 PH> at
>> mmc0 50.0MHz/4bit/65535-block
>>
>> But getting error on mountroot as shown in the attachment.
>>
>> Any help/pointers would be appreciated.
>>
>
> Hmm.  If it's an 8gb card it's HC by definition, and it says it detected
> an SDHC card, so running at 50mhz shouldn't be a problem.  It would be
> interesting to see if it works if you force it to run as a non-HC at
> 25mhz, using this patch...
>
> http://people.freebsd.org/~gonzo/patches/u-boot-pi-nohs.diff

Thanks for the quick reply, Ian.

But I could not find drivers/mmc/sdhci.c as listed in these diffs.

I am using head at revision 244918.

[hirenp@flymockour-l7 /usr/src/head]$ find . -iname sdhci.c
./sys/dev/sdhci/sdhci.c
[hirenp@flymockour-l7 /usr/src/head]$

[hirenp@flymockour-l7 /usr/src/head]$ grep -r "mmc->host_caps" *
[hirenp@flymockour-l7 /usr/src/head]$

Am I missing something?

Thanks,
Hiren
>
> -- Ian
>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CALCpEUEVZz24VTHJVFTHET2=r3vb1RfFawdP-8=ULfaGoFTppg>