Date: Sun, 06 Nov 2005 17:24:16 -0500 From: Michael Butler <imb@protected-networks.net> To: freebsd-stable@freebsd.org Subject: Re: 6-stable unstable with HighPoint HPT372N UDMA133 controller Message-ID: <436E8290.3050604@protected-networks.net> In-Reply-To: <436E7B02.9020207@protected-networks.net> References: <436E7B02.9020207@protected-networks.net>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------040908020103080200030407
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I wrote:
| cvsup'd and built: FreeBSD 6.0-STABLE #4: Fri Nov 4 18:07:30 EST 2005
~ [ .. ]
| Nov 6 16:43:27 mail kernel: DOH! ata_alloc_request failed!
| Nov 6 16:43:27 mail kernel: FAILURE - out of memory in
ata_raid_init_request
| Nov 6 16:43:27 mail last message repeated 7 times
| Nov 6 16:43:27 mail kernel:
Brief and verbose dmesg attached,
Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32)
iD8DBQFDboKQiJykeV6HPMURAownAJ0USKehihwSwMk3d2P/P0cQEfc2DwCfXa+U
RC8zytiMMIQ23pcEs7CIuNo=
=KsT3
-----END PGP SIGNATURE-----
--------------040908020103080200030407
Content-Type: text/plain;
name="auburn-dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="auburn-dmesg.txt"
pcibios: PCI BIOS entry at 0xfd7a0+0x203
pnpbios: Found PnP BIOS data at 0xc00f6ae0
pnpbios: Entry = f0000:9f5d Rev = 1.0
Other BIOS signatures found:
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 13 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 D 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 11 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
imb@mail:/home/imb> dmesg
pnpbios: Entry = f0000:9f5d Rev = 1.0
Other BIOS signatures found:
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 13 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 D 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 11 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 12
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 12
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
ACPI timer: 0/16777185 0/7 0/5 0/5 0/6 0/5 0/4 0/5 0/5 0/5 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7190, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x7191, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001000, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
map[20]: type 4, range 32, base 00001020, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.ISA_.LNKD:0)
pcib0: slot 7 INTD routed to irq 9 via \\_SB_.PCI0.ISA_.LNKD
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 00007000, size 4, enabled
found-> vendor=0x1103, dev=0x0005, revid=0x02
bus=0, slot=13, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0105, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001040, size 3, enabled
map[14]: type 4, range 32, base 00001014, size 2, enabled
map[18]: type 4, range 32, base 00001018, size 3, enabled
map[1c]: type 4, range 32, base 00001010, size 2, enabled
map[20]: type 4, range 32, base 00001400, size 8, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.ISA_.LNKA:0)
pcib0: slot 13 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKA
found-> vendor=0x9004, dev=0x3860, revid=0x03
bus=0, slot=14, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001800, size 8, enabled
map[14]: type 1, range 32, base d0000000, size 12, enabled
pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.ISA_.LNKB:0)
pcib0: slot 14 INTA routed to irq 10 via \\_SB_.PCI0.ISA_.LNKB
found-> vendor=0x10b7, dev=0x9055, revid=0x24
bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0114, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=5
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001080, size 7, port disabled
map[14]: type 1, range 32, base d0001000, size 7, memory disabled
pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.ISA_.LNKC:0)
pcib0: slot 15 INTA routed to irq 5 via \\_SB_.PCI0.ISA_.LNKC
found-> vendor=0x12eb, dev=0x0002, revid=0xfe
bus=0, slot=16, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0104, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x0c (3000 ns)
intpin=a, irq=9
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base d0040000, size 18, memory disabled
map[14]: type 4, range 32, base 00001050, size 3, port disabled
map[18]: type 4, range 32, base 00001048, size 3, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ISA_.LNKD:0)
pcib0: slot 16 INTA routed to irq 9 via \\_SB_.PCI0.ISA_.LNKD
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xd0100000-0xd1ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4742, revid=0x5c
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base d1000000, size 24, enabled
pcib1: (null) requested memory range 0xd1000000-0xd1ffffff: good
map[14]: type 4, range 32, base 00009000, size 8, enabled
pcib1: (null) requested I/O range 0x9000-0x90ff: in range
map[18]: type 1, range 32, base d0100000, size 12, enabled
pcib1: (null) requested memory range 0xd0100000-0xd0100fff: good
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=01 ostat0=50 ostat1=ff
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1020-0x103f irq 9 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1020
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x7000-0x700f irq 9 at device 7.3 on pci0
intpm0: Reserved 0x10 bytes for rid 0x90 type 4 at 0x7000
intpm0: I/O mapped 7000
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus1: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus1
intpm0: PM I/O mapped 8000
atapci1: <HighPoint HPT372N UDMA133 controller> port 0x1040-0x1047,0x1014-0x1017,0x1018-0x101f,0x1010-0x1013,0x1400-0x14ff irq 11 at device 13.0 on pci0
atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0x1400
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1040
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1014
ata2: reset tp1 mask=03 ostat0=50 ostat1=50
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1018
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1010
ata3: reset tp1 mask=03 ostat0=50 ostat1=50
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata3: [MPSAFE]
ahc0: <Adaptec 2930CU SCSI adapter> port 0x1800-0x18ff mem 0xd0000000-0xd0000fff irq 10 at device 14.0 on pci0
ahc0: Defaulting to MEMIO on
ahc0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xd0000000
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable is present
ahc0: external cable not present
ahc0: BIOS eeprom not present
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 460 instructions downloaded
ahc0: Features 0x10101, Bugs 0x35, Flags 0x28485540
ahc0: [GIANT-LOCKED]
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x1080-0x10ff mem 0xd0001000-0xd000107f irq 5 at device 15.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xd0001000
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:10:5a:17:a3:79
xl0: [MPSAFE]
pci0: <multimedia, audio> at device 16.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: failed to reset the aux device.
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x401 0x411 0x401 0x401
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc000-0xcc7ff,0xdc000-0xdffff,0xe4000-0xeffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x401 0x401 0x401 0x401
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 349880910 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging unlimited
lo0: bpf attached
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on Intel PIIX4 chip
acd0: setting UDMA33 on Intel PIIX4 chip
acd0: <NEC CD-ROM DRIVE:28D/3.03> CDROM drive at ata1 as master
acd0: read 2928KB/s (6890KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad4: setting PIO4 on HighPoint chip
ad4: setting UDMA133 on HighPoint chip
ad4: 152627MB <SAMSUNG SP1604N TM100-24> at ata2-master UDMA133
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: HighPoint (v3) check1 failed
****** ATA Highpoint V2 RocketRAID Metadata *****
magic 0x5a7816f0
magic_0 0xb42b042b
magic_1 0xb42a042a
order 0x00000003
array_width 2
stripe_shift 7
type RAID01_RAID0
disk_number 0
total_sectors 625163520
disk_mode 0x00000000
boot_mode 0x12345678
boot_disk 0x80
boot_protect 0x00
log_entries 0x00
log_index 0x00
rebuild_lba 0x7fffffff
dummy_1 0x00
name_1 <RAID_0_0>
dummy_2 0x00
name_2 <RAID01_0>
=================================================
ad5: setting PIO4 on HighPoint chip
ad5: setting UDMA133 on HighPoint chip
ad5: 152627MB <SAMSUNG SP1604N TM100-24> at ata2-slave UDMA133
ad5: 312581808 sectors [330774C/15H/63S] 16 sectors/interrupt 1 depth queue
ad5: HighPoint (v3) check1 failed
****** ATA Highpoint V2 RocketRAID Metadata *****
magic 0x5a7816f0
magic_0 0xb42b042b
magic_1 0xb42a042a
order 0x00000003
array_width 2
stripe_shift 7
type RAID01_RAID0
disk_number 1
total_sectors 625163520
disk_mode 0x00000000
boot_mode 0x12345678
boot_disk 0x80
boot_protect 0x00
log_entries 0x00
log_index 0x00
rebuild_lba 0x7fffffff
dummy_1 0x00
name_1 <RAID_0_0>
dummy_2 0x00
name_2 <RAID01_0>
=================================================
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad6: setting PIO4 on HighPoint chip
ad6: setting UDMA133 on HighPoint chip
ad6: 152627MB <SAMSUNG SP1604N TM100-24> at ata3-master UDMA133
ad6: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
ad6: HighPoint (v3) check1 failed
****** ATA Highpoint V2 RocketRAID Metadata *****
magic 0x5a7816f0
magic_0 0xb42c042c
magic_1 0xb42a042a
order 0x00000002
array_width 2
stripe_shift 7
type RAID01_RAID0
disk_number 0
total_sectors 625163520
disk_mode 0x00000000
boot_mode 0x12345678
boot_disk 0x80
boot_protect 0x00
log_entries 0x00
log_index 0x00
rebuild_lba 0x7fffffff
dummy_1 0x00
name_1 <RAID_0_1>
dummy_2 0x00
name_2 <RAID01_0>
=================================================
ad7: setting PIO4 on HighPoint chip
ad7: setting UDMA133 on HighPoint chip
ad7: 152627MB <SAMSUNG SP1604N TM100-24> at ata3-slave UDMA133
ad7: 312581808 sectors [330774C/15H/63S] 16 sectors/interrupt 1 depth queue
ad7: HighPoint (v3) check1 failed
****** ATA Highpoint V2 RocketRAID Metadata *****
magic 0x5a7816f0
magic_0 0xb42c042c
magic_1 0xb42a042a
order 0x00000002
array_width 2
stripe_shift 7
type RAID01_RAID0
disk_number 1
total_sectors 625163520
disk_mode 0x00000000
boot_mode 0x12345678
boot_disk 0x80
boot_protect 0x00
log_entries 0x00
log_index 0x00
rebuild_lba 0x7fffffff
dummy_1 0x00
name_1 <RAID_0_1>
dummy_2 0x00
name_2 <RAID01_0>
=================================================
GEOM: new disk ad4
GEOM: new disk ad5
GEOM: new disk ad6
GEOM: new disk ad7
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:1. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
(probe0:ahc0:0:0:0): error 22
(probe0:ahc0:0:0:0): Unretryable Error
(ahc0:A:0:0): Sending SDTR period c, offset f
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
(ahc0:A:0:0): Sending SDTR period 19, offset f
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <HP C1537A L706> Removable Sequential Access SCSI-2 device
pass0: 10.000MB/s transfers (10.000MHz, offset 15)
pass1 at ata1 bus 0 target 0 lun 0
pass1: <NEC CD-ROM DRIVE:28D 3.03> Removable CD-ROM SCSI-0 device
pass1: Serial Number [
pass1: 33.000MB/s transfers
sa0 at ahc0 bus 0 target 0 lun 0
sa0: <HP C1537A L706> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
pass1 at ata1 bus 0 target 0 lun 0
pass1: <NEC CD-ROM DRIVE:28D 3.03> Removable CD-ROM SCSI-0 device
pass1: Serial Number [
pass1: 33.000MB/s transfers
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format HighPoint v2 RocketRAID
type RAID0+1
flags 0x00 0
magic_0 0x00000000b42b042b
magic_1 0x00000000b42a042a
generation 0
total_sectors 625163520
offset_sectors 10
heads 255
sectors 63
cylinders 38914
width 2
interleave 128
total_disks 4
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 312581760
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad5: sectors 312581760
disk 2: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6: sectors 312581760
disk 3: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad7: sectors 312581760
=================================================
ar0: 305255MB <HighPoint v2 RocketRAID RAID0+1 (stripe 64 KB)> status: READY
ar0: 625163520 sectors [38914C/255H/63S] <RAID_0_1> subdisks defined as:
ar0: disk0 READY (master) GEOM: new disk ar0
using ad4 at ata2-master
ar0: disk1 READY (master) using ad5 at ata2-slave
ar0: disk2 READY (mirror) using ad6 at ata3-master
ar0: disk3 READY (mirror) using ad7 at ata3-slave
Trying to mount root from ufs:/dev/ar0s1a
start_init: trying /sbin/init
--------------040908020103080200030407
Content-Type: text/plain;
name="auburn-brief-dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="auburn-brief-dmesg.txt"
Nov 1 14:33:51 mail kernel: Copyright (c) 1992-2005 The FreeBSD Project.
Nov 1 14:33:51 mail kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Nov 1 14:33:51 mail kernel: The Regents of the University of California. All rights reserved.
Nov 1 14:33:51 mail kernel: FreeBSD 6.0-RC1 #3: Mon Oct 31 06:46:37 EST 2005
Nov 1 14:33:51 mail kernel: imb@mail.auburn.protected-networks.net:/usr/obj/usr/src/sys/AUBURN
Nov 1 14:33:51 mail kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Nov 1 14:33:51 mail kernel: CPU: Pentium II/Pentium II Xeon/Celeron (349.88-MHz 686-class CPU)
Nov 1 14:33:51 mail kernel: Origin = "GenuineIntel" Id = 0x651 Stepping = 1
Nov 1 14:33:51 mail kernel: Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
Nov 1 14:33:51 mail kernel: real memory = 402653184 (384 MB)
Nov 1 14:33:51 mail kernel: avail memory = 388767744 (370 MB)
Nov 1 14:33:51 mail kernel: npx0: [FAST]
Nov 1 14:33:51 mail kernel: npx0: <math processor> on motherboard
Nov 1 14:33:51 mail kernel: npx0: INT 16 interface
Nov 1 14:33:51 mail kernel: acpi0: <PTLTD RSDT> on motherboard
Nov 1 14:33:51 mail kernel: acpi0: Power Button (fixed)
Nov 1 14:33:51 mail kernel: pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
Nov 1 14:33:51 mail kernel: pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
Nov 1 14:33:51 mail kernel: pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
Nov 1 14:33:51 mail kernel: pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0
Nov 1 14:33:51 mail kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
Nov 1 14:33:51 mail kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
Nov 1 14:33:51 mail kernel: cpu0: <ACPI CPU> on acpi0
Nov 1 14:33:51 mail kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Nov 1 14:33:51 mail kernel: pci0: <ACPI PCI bus> on pcib0
Nov 1 14:33:51 mail kernel: agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
Nov 1 14:33:51 mail kernel: pcib1: <PCI-PCI bridge> at device 1.0 on pci0
Nov 1 14:33:51 mail kernel: pci1: <PCI bus> on pcib1
Nov 1 14:33:51 mail kernel: pci1: <display, VGA> at device 0.0 (no driver attached)
Nov 1 14:33:51 mail kernel: isab0: <PCI-ISA bridge> at device 7.0 on pci0
Nov 1 14:33:51 mail kernel: isa0: <ISA bus> on isab0
Nov 1 14:33:51 mail kernel: atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f at devi
ce 7.1 on pci0
Nov 1 14:33:51 mail kernel: ata0: <ATA channel 0> on atapci0
Nov 1 14:33:51 mail kernel: ata1: <ATA channel 1> on atapci0
Nov 1 14:33:51 mail kernel: uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1020-0x103f irq 9 at device 7.2 on pci0
Nov 1 14:33:51 mail kernel: uhci0: [GIANT-LOCKED]
Nov 1 14:33:51 mail kernel: usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
Nov 1 14:33:51 mail kernel: usb0: USB revision 1.0
Nov 1 14:33:51 mail kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Nov 1 14:33:51 mail kernel: uhub0: 2 ports with 2 removable, self powered
Nov 1 14:33:51 mail kernel: intpm0: <Intel 82371AB Power management controller> port 0x7000-0x700f irq 9 at device 7.3 on pci0
Nov 1 14:33:51 mail kernel: intpm0: I/O mapped 7000
Nov 1 14:33:51 mail kernel: intpm0: intr IRQ 9 enabled revision 0
Nov 1 14:33:51 mail kernel: intpm0: [GIANT-LOCKED]
Nov 1 14:33:51 mail kernel: intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
Nov 1 14:33:51 mail kernel: smbus1: <System Management Bus> on intsmb0
Nov 1 14:33:51 mail kernel: smb0: <SMBus generic I/O> on smbus1
Nov 1 14:33:51 mail kernel: intpm0: PM I/O mapped 8000
Nov 1 14:33:51 mail kernel: atapci1: <HighPoint HPT372N UDMA133 controller> port 0x1040-0x1047,0x1014-0x1017,0x1018-0x101f,0x1010-0
x1013,0x1400-0x14ff irq 11 at device 13.0 on pci0
Nov 1 14:33:51 mail kernel: ata2: <ATA channel 0> on atapci1
Nov 1 14:33:51 mail kernel: ata3: <ATA channel 1> on atapci1
Nov 1 14:33:51 mail kernel: ahc0: <Adaptec 2930CU SCSI adapter> port 0x1800-0x18ff mem 0xd0000000-0xd0000fff irq 10 at device 14.0
on pci0
Nov 1 14:33:51 mail kernel: ahc0: [GIANT-LOCKED]
Nov 1 14:33:51 mail kernel: aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
Nov 1 14:33:51 mail kernel: xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x1080-0x10ff mem 0xd0001000-0xd000107f irq 5 at device 15
.0 on pci0
Nov 1 14:33:51 mail kernel: miibus0: <MII bus> on xl0
Nov 1 14:33:51 mail kernel: xlphy0: <3Com internal media interface> on miibus0
Nov 1 14:33:51 mail kernel: xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Nov 1 14:33:51 mail kernel: xl0: Ethernet address: 00:10:5a:17:a3:79
Nov 1 14:33:51 mail kernel: pci0: <multimedia, audio> at device 16.0 (no driver attached)
Nov 1 14:33:51 mail kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Nov 1 14:33:51 mail kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Nov 1 14:33:51 mail kernel: kbd0 at atkbd0
Nov 1 14:33:51 mail kernel: atkbd0: [GIANT-LOCKED]
Nov 1 14:33:51 mail kernel: fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
Nov 1 14:33:51 mail kernel: fdc0: [FAST]
Nov 1 14:33:51 mail kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Nov 1 14:33:51 mail kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Nov 1 14:33:51 mail kernel: sio0: type 16550A
Nov 1 14:33:51 mail kernel: ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
Nov 1 14:33:51 mail kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Nov 1 14:33:51 mail kernel: ppc0: FIFO with 16/16/8 bytes threshold
Nov 1 14:33:51 mail kernel: ppbus0: <Parallel port bus> on ppc0
Nov 1 14:33:51 mail kernel: lpt0: <Printer> on ppbus0
Nov 1 14:33:51 mail kernel: lpt0: Interrupt-driven port
Nov 1 14:33:51 mail kernel: ppi0: <Parallel I/O> on ppbus0
Nov 1 14:33:51 mail kernel: pmtimer0 on isa0
Nov 1 14:33:51 mail kernel: orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc000-0xcc7ff,0xdc000-0xdffff,0xe4000-0xeffff on isa
0
Nov 1 14:33:51 mail kernel: sc0: <System console> at flags 0x100 on isa0
Nov 1 14:33:51 mail kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Nov 1 14:33:51 mail kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
Nov 1 14:33:51 mail kernel: sio1: port may not be enabled
Nov 1 14:33:51 mail kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Nov 1 14:33:51 mail kernel: Timecounter "TSC" frequency 349880696 Hz quality 800
Nov 1 14:33:51 mail kernel: Timecounters tick every 1.000 msec
Nov 1 14:33:51 mail kernel: ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging un
limited
Nov 1 14:33:51 mail kernel: Waiting 5 seconds for SCSI devices to settle
Nov 1 14:33:51 mail kernel: acd0: CDROM <NEC CD-ROM DRIVE:28D/3.03> at ata1-master UDMA33
Nov 1 14:33:51 mail kernel: ad4: 152627MB <SAMSUNG SP1604N TM100-24> at ata2-master UDMA133
Nov 1 14:33:51 mail kernel: ad5: 152627MB <SAMSUNG SP1604N TM100-24> at ata2-slave UDMA133
Nov 1 14:33:51 mail kernel: ad6: 152627MB <SAMSUNG SP1604N TM100-24> at ata3-master UDMA133
Nov 1 14:33:51 mail kernel: ad7: 152627MB <SAMSUNG SP1604N TM100-24> at ata3-slave UDMA133
Nov 1 14:33:51 mail kernel: sa0 at ahc0 bus 0 target 0 lun 0
Nov 1 14:33:51 mail kernel: sa0: <HP C1537A L706> Removable Sequential Access SCSI-2 device
Nov 1 14:33:51 mail kernel: sa0: 10.000MB/s transfers (10.000MHz, offset 15)
Nov 1 14:33:51 mail kernel: pass1 at ata1 bus 0 target 0 lun 0
Nov 1 14:33:51 mail kernel: pass1: <NEC CD-ROM DRIVE:28D 3.03> Removable CD-ROM SCSI-0 device
Nov 1 14:33:51 mail kernel: pass1: 33.000MB/s transfers
Nov 1 14:33:51 mail kernel: ar0: 305255MB <HighPoint v2 RocketRAID RAID0+1 (stripe 64 KB)> status: READY
Nov 1 14:33:51 mail kernel: ar0: disk0 READY (master) using ad4 at ata2-master
Nov 1 14:33:51 mail kernel: ar0: disk1 READY (master) using ad5 at ata2-slave
Nov 1 14:33:51 mail kernel: ar0: disk2 READY (mirror) using ad6 at ata3-master
Nov 1 14:33:51 mail kernel: ar0: disk3 READY (mirror) using ad7 at ata3-slave
Nov 1 14:33:51 mail kernel: Trying to mount root from ufs:/dev/ar0s1a
--------------040908020103080200030407--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?436E8290.3050604>