Date: Fri, 16 Jun 2000 09:38:38 +0100 From: Abel Mayal <mayala@info.bt.co.uk> To: Jonathan Chen <jonathan.chen@itouch.co.nz> Cc: questions <questions@FreeBSD.ORG> Subject: Re: Jaz Message-ID: <003c01bfd76e$4a338cd0$fc709284@futures.bt.co.uk> References: <015301bfd549$1869f7b0$fc709284@futures.bt.co.uk> <20000614113423.A1321@jonc.ntdns.wilsonandhorton.co.n> <00fc01bfd612$88ce7390$fc709284@futures.bt.co.uk> <20000615085230.A4654@jonc.ntdns.wilsonandhorton.co.n>
index | next in thread | previous in thread | raw e-mail
Hello,
Iīm still trying to install the Jazz driver for FreeBSD. I have checked the
dmesg and there is two entries with da0 and da1:
******* DMESG ********************
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DMVS18V 0077> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DMVS18V 0077> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
************************************
Then I go the /stand/sysinstall -> Configure -> FDisk and there is two
options da0 and da1. I select da0 for instance, and it comes up window with
the following information:
Offset Size End Name PType Desc
Subtype Flags
0 63 62 - 6
unused 0
63 35840952 35841014 da0s1 2 fat
12 =>
35841015 2655 35843669 - 6 unused
0 >
If you select da1 you get the same information. I donīt know very well what
to do in this window and also I donīt know what to do once I have the slice
number to use for the filesystem????? Is the slice number da0sa1???? What do
I have to do with this slice number????
Can anyone help me again?
Many, many thanks
abel
----- Original Message -----
From: Jonathan Chen <jonathan.chen@itouch.co.nz>
To: Abel Mayal <mayala@info.bt.co.uk>
Cc: questions <questions@FreeBSD.ORG>
Sent: Wednesday, June 14, 2000 9:52 PM
Subject: Re: Jaz
> On Wed, Jun 14, 2000 at 04:09:18PM +0100, Abel Mayal wrote:
> > Hi everyone,
> > Thanks for your answer Jonathan but I still donīt know how to do it.
> > I've got a SCSI Jazz device and a SCSI bus but I don't know which device
> > (/dev/ ) of FreeBSD select... Do I have to do a mount with this device?
> > "mount /dev/xxxxxx /jazz"
>
> Have a look at the result of "dmesg". If your Jazz device is on the
> SCSI bus, you'll have an entry for "daN", where N is a number;
> indicating the device entry to use.
>
> Once you know the device number, you can use:
>
> /stand/sysinstall -> Configure -> FDisk
>
> to work out the slice number to use for the filesystem: look under the
> "Name" column. (Don't do anything silly within FDisk...).
>
> Cheers.
> --
> Jonathan Chen <jonathan.chen@itouch.co.nz>
> ----------------------------------------------------------------------
> Live your own life, for you will die your own death
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003c01bfd76e$4a338cd0$fc709284>