Date: Wed, 12 Apr 2017 09:01:59 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: =?UTF-8?B?T3RhY8OtbGlv?= <otacilio.neto@bsd.com.br> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: rtwn0: r92c_handle_c2h_task: C2H report 15 (len 15) was not handled Message-ID: <CAJ-Vmokd-dP9DsD0BYdQf1pDRSrpuqob7ZeJeY58XHWECcbKuw@mail.gmail.com> In-Reply-To: <15b51ee7-73a5-8f82-911a-1e947e8ff76f@bsd.com.br> References: <15b51ee7-73a5-8f82-911a-1e947e8ff76f@bsd.com.br>
next in thread | previous in thread | raw e-mail | index | archive | help
yes please! -a On 12 April 2017 at 07:07, Otac=C3=ADlio <otacilio.neto@bsd.com.br> wrote: > Dears > > I'm using a beaglebone to stream videos over wifi. For this, I'm testing = two > wifi adapters: > > rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > > run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address > e8:4e:06:3c:fd:5d > > Both adapters works fine at low bit rate (300 Kbps), but when I use a hig= h > bi rate, for example 3 Mbps the adapter RTL8188CUS hangs up with the > message below: > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > rtwn0: at uhub2, port 3, addr 4 (disconnected) > rtwn0: device timeout > Network is down > [ota@beaglebone ~/workspace/SOFTWARE_Espelho/Capture]$ rtwn0: > r92c_handle_c2h_task: C2H report 15 (len 15) was not handled > Apr 12 10:58:06 beaglebone openvpn[759]: write UDP: Network is down > (code=3D50) > Apr 12 10:58:10 beaglebone wpa_supplicant[1436]: ioctl[SIOCS80211, op=3D2= 0, > val=3D0, arg_len=3D7]: Can't assign requested address > rtwn0: ieee80211_crypto_encap returns NULL. > rtwn0: ieee80211_crypto_encap returns NULL. > Apr 12 10:58:10 beaglebone wpa_supplicant[1436]: ioctl[SIOCS80211, op=3D1= 03, > val=3D0, arg_len=3D128]: Device not configured > Apr 12 10:58:16 beaglebone last message repeated 6 times > Apr 12 10:58:16 beaglebone openvpn[759]: write UDP: Network is down > (code=3D50) > Apr 12 10:58:17 beaglebone wpa_supplicant[1436]: ioctl[SIOCS80211, op=3D1= 03, > val=3D0, arg_len=3D128]: Device not configured > > > This occurs only with the RTL8188CUS (rtwn). The adapter RT5390 (run) wor= ks > fine on both situation and never hangs up. So, the FreeBSD version is: > > FreeBSD beaglebone 12.0-CURRENT FreeBSD 12.0-CURRENT #1 r316378M: Thu Apr= 6 > 01:08:51 -03 2017 ota@beaglebone:/mnt/obj/mnt/src/sys/BEAGLEBONE arm > > So, should I open a bug report? > > > []'s > > -Otacilio > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.or= g"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmokd-dP9DsD0BYdQf1pDRSrpuqob7ZeJeY58XHWECcbKuw>