Date: Wed, 6 Oct 2004 21:15:53 +0000 (UTC) From: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> To: FreeBSD current mailing list <current@freebsd.org> Cc: Mike Tancsa <mike@sentex.net> Subject: Re: if_em dmesg Message-ID: <Pine.BSF.4.53.0410062113460.82309@e0-0.zab2.int.zabbadoz.net> In-Reply-To: <Pine.BSF.4.53.0410062043030.82309@e0-0.zab2.int.zabbadoz.net> References: <Pine.BSF.4.53.0410061421410.82309@e0-0.zab2.int.zabbadoz.net> <6.1.2.0.0.20041006163753.05f9a9b0@64.7.153.2> <Pine.BSF.4.53.0410062043030.82309@e0-0.zab2.int.zabbadoz.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 6 Oct 2004, Bjoern A. Zeeb wrote:
> Here is a somewhat longer extract from dmesg to better show where
> this happens:
>
> --- > dmesg ---
> ...
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xcf80-0xcf9f mem 0xfe9e0000-0xfe9fffff irq 18 at device 1.0 on pci2
> em0: Ethernet address: 00:0c:xx:xx:xx:xx
> em0: Speed:N/A Duplex:N/A
> ...
> acd0: CDROM <BCD-8X 1996-11-29/VER 1.2> at ata1-master PIO3
> SMP: AP CPU #1 Launched!
> Mounting root from ufs:/dev/ad0s1a
> em
> 0
> :
>
> L
> ink is up 100 Mbps Full Duplex
> --- / dmesg ---
--- > dmesg -a ---
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet xx.xxx.xx.2 netmask 0xfffffff0 broadcast xx.xxx.xx.15
em
inet6 fe80::20c:xxxx:xxxx:xxxx%em0 prefixlen 64 tentative scopeid 0x1
0
inet xx.xxx.xx.3 netmask 0xffffffff broadcast xx.xxx.xx.3
:
ether 00:0c:xx:xx:xx:xx
media: Ethernet 100baseTX <full-duplex>
L
status: active
ink is up 100 Mbps Full Duplex
--- /dmesg ---
ok that seems to be the prob. Thanks Mike for pointing this out.
--
Greetings
Bjoern A. Zeeb bzeeb at Zabbadoz dot NeT
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.53.0410062113460.82309>