Date: Mon, 06 Jan 2014 17:17:27 +0200 From: Alexandr <shuriku@shurik.kiev.ua> To: Adrian Chadd <adrian@freebsd.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Problem connecting to AP Message-ID: <52CAC907.8020507@shurik.kiev.ua> In-Reply-To: <CAJ-VmomRPONT1WiSOFwT4F5XT9VhzBaU_Qd6sLxFzpLXhFhi2A@mail.gmail.com> References: <52CAB6F2.3010707@shurik.kiev.ua> <CAJ-Vmok0JFLBemBOrB0YUnJ0OkJQEwuh1Mg75W52zWxXYrDpvg@mail.gmail.com> <52CABD82.2070106@shurik.kiev.ua> <CAJ-VmokuY5Tk_D=wQCGGw1t%2B4TJCzqDWQ6gyHOpz0==qY%2BfZaA@mail.gmail.com> <52CAC368.3000105@shurik.kiev.ua> <CAJ-Vmo=Q8yjDfB4wF1kiQv0eJs2esGVuqcSvAy20qqNZSJxCcA@mail.gmail.com> <CAJ-Vmo=QgE7BXEAj_omdfJaweqzy_LooNzZTdPEPfD5ahY4%2B9w@mail.gmail.com> <52CAC6B6.8090007@shurik.kiev.ua> <CAJ-VmomRPONT1WiSOFwT4F5XT9VhzBaU_Qd6sLxFzpLXhFhi2A@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
It's TP-Link TL-MR3420 rev.1.
How can I capture a dump? AP has no such tools and it logs is clean. Can
I do it from my bsd?
06.01.2014 17:08, Adrian Chadd пишет:
> Which AP is it?
>
> I kinda want to see a packet dump of the negotiation exchange. I'm
> worried that your AP is deciding to kick you off because you don't
> meet some minimum rate selection or something.
>
> -a
>
> On 6 January 2014 07:07, Alexandr <shuriku@shurik.kiev.ua> wrote:
>> Yes, just now it works in 11n-only. But I tried switch it to bgn-mixed,
>> g-only, n-only - no luck.
>>
>> /var/log/dmesg.today:
>>
>> wlan0: [54:e6:fc:e4:48:c4] recv auth frame with algorithm 0 seq 2
>> wlan0: link state changed to UP
>> wlan0: [54:e6:fc:e4:48:c4] recv deauthenticate (reason 2)
>> wlan0: link state changed to DOWN
>>
>> /var/log/messages:
>>
>> Jan 6 17:05:03 thinkpad wpa_supplicant[27113]: wlan0: Trying to
>> associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz)
>> Jan 6 17:05:03 thinkpad wpa_supplicant[27113]: wlan0: Associated with
>> 54:e6:fc:e4:48:c4
>> Jan 6 17:05:06 thinkpad wpa_supplicant[27113]: wlan0:
>> CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0
>> Jan 6 17:05:17 thinkpad wpa_supplicant[27113]: wlan0: Trying to
>> associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz)
>> Jan 6 17:05:17 thinkpad wpa_supplicant[27113]: wlan0: Associated with
>> 54:e6:fc:e4:48:c4
>> Jan 6 17:05:20 thinkpad wpa_supplicant[27113]: wlan0:
>> CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0
>>
>> 06.01.2014 16:56, Adrian Chadd пишет:
>>> .. and is the AP locked down to 11n only or something?
>>>
>>>
>>> -a
>>>
>>> On 6 January 2014 06:55, Adrian Chadd <adrian@freebsd.org> wrote:
>>>> Whta's logged in dmesg?
>>>>
>>>>
>>>> -a
>>>>
>>>> On 6 January 2014 06:53, Alexandr <shuriku@shurik.kiev.ua> wrote:
>>>>> Ок, I changed key to "secretsecretsecret", the same error - WPA: 4-Way
>>>>> Handshake failed - pre-shared key may be incorrect.
>>>>>
>>>>> <3>Trying to associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz)
>>>>> <3>Associated with 54:e6:fc:e4:48:c4
>>>>> <3>CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0
>>>>> <3>WPA: 4-Way Handshake failed - pre-shared key may be incorrect
>>>>> <3>CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="door" auth_failures=8
>>>>> duration=30
>>>>>
>>>>> But it successfully connects to my android phone:
>>>>>
>>>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>>>> ether 68:5d:43:92:3a:88
>>>>> inet 192.168.1.227 netmask 0xffffff00 broadcast 192.168.1.255
>>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>> media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
>>>>> status: associated
>>>>> ssid htc channel 6 (2437 MHz 11g ht/20) bssid 84:7a:88:c9:25:ce
>>>>> country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
>>>>> AES-CCM 2:128-bit txpower 15 bmiss 10 scanvalid 60 bgscan
>>>>> bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64 protmode CTS
>>>>> ampdulimit 16k -amsdutx amsdurx shortgi wme roaming MANUAL
>>>>>
>>>>>
>>>>> May be it AP-related problem? But why other devices works (laptop with
>>>>> opensuse and different android devices)
>>>>>
>>>>> 06.01.2014 16:43, Adrian Chadd пишет:
>>>>>> You still need a longer password, psk isn't WPA long. Try secretsecretsecret.
>>>>>>
>>>>>>
>>>>>> -a
>>>>>>
>>>>>> On 6 January 2014 06:28, Alexandr <shuriku@shurik.kiev.ua> wrote:
>>>>>>> I simply changed key in this listing to "secret". Yes, I tried a very
>>>>>>> simple configuration, no luck:
>>>>>>>
>>>>>>> network={
>>>>>>> ssid="door"
>>>>>>> psk="secret"
>>>>>>> }
>>>>>>>
>>>>>>>
>>>>>>> 06.01.2014 16:24, Adrian Chadd пишет:
>>>>>>>> The passphrase 'secret' is too short for WPA.
>>>>>>>>
>>>>>>>> I gather it's not _that_, but is it long enough to meet WPA reuirements?
>>>>>>>>
>>>>>>>> Have you tried removing the proto= and bssid lines? You don't strictly
>>>>>>>> need them.
>>>>>>>>
>>>>>>>> Thanks!
>>>>>>>>
>>>>>>>> -a
>>>>>>>>
>>>>>>>>
>>>>>>>> On 6 January 2014 06:00, Alexandr <shuriku@shurik.kiev.ua> wrote:
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> I recently upgraded system on my laptop to current with a hope to get my
>>>>>>>>> wireless card working. Now it successfully recognized by kernel:
>>>>>>>>>
>>>>>>>>> iwn0: <Intel Centrino Wireless-N 2230> mem 0xf2d00000-0xf2d01fff irq 17
>>>>>>>>> at device 0.0 on pci3
>>>>>>>>>
>>>>>>>>> Unfortunately, I can't connect to my home access point:
>>>>>>>>>
>>>>>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-DISCONNECTED
>>>>>>>>> bssid=54:e6:fc:e4:48:c4 reason=0
>>>>>>>>> wpa_supplicant[519]: wlan0: WPA: 4-Way Handshake failed - pre-shared key
>>>>>>>>> may be incorrect
>>>>>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0
>>>>>>>>> ssid="door" auth_failures=10 duration=30
>>>>>>>>>
>>>>>>>>> I tried different security settings (WPA-WPA2 + AES-TKIP), wireless
>>>>>>>>> modes, radio channels on my access point, the same error.
>>>>>>>>>
>>>>>>>>> # ifconfig wlan0
>>>>>>>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>>>>>>>> ether 68:5d:43:92:3a:88
>>>>>>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>>>>>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>>>>>>>> status: no carrier
>>>>>>>>> ssid door channel 1 (2412 MHz 11g ht/40+)
>>>>>>>>> country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
>>>>>>>>> txpower 13
>>>>>>>>> bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250
>>>>>>>>> roam:rssi 7 roam:rate 64 protmode CTS ampdulimit 8k -amsdutx amsdurx
>>>>>>>>> shortgi wme roaming MANUAL
>>>>>>>>>
>>>>>>>>> /etc/wpa_supplicant.conf:
>>>>>>>>>
>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant
>>>>>>>>> ctrl_interface_group=wheel
>>>>>>>>> eapol_version=2
>>>>>>>>>
>>>>>>>>> network={
>>>>>>>>> ssid="door"
>>>>>>>>> bssid=54:e6:fc:e4:48:c4
>>>>>>>>> key_mgmt=WPA-PSK
>>>>>>>>> proto=WPA RSN
>>>>>>>>> psk="secret"
>>>>>>>>> }
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Other home devices connets to AP without problems. Can you point me how
>>>>>>>>> I can debug it?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> freebsd-wireless@freebsd.org mailing list
>>>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>>>>>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52CAC907.8020507>