Date: Sat, 3 May 2003 09:43:11 +0200 (CEST) From: Blaz Zupan <blaz@si.FreeBSD.org> To: freebsd-current@freebsd.org Subject: [PATCH] ACPI fix for HP Omnibook battery status Message-ID: <20030503091505.F41707@titanic.medinet.si>
next in thread | raw e-mail | index | archive | help
My HP Omnibook XE3-GF apparently has a broken BIOS which has a off-by-one
error in the AML so neither FreeBSD nor Linux can display the battery status,
not even when using APM instead of ACPI. I stumbled upon a patch that fixes it
on one of the Linux mailing lists and made the neccesary changes so it patches
cleanly with the latest -current kernel. I'm told this hardware is reused by
many manufacturers and that this patch also fixes some Toshiba notebooks.
With this patch, "apm" can display the battery status just fine:
APM version: 1.2
APM Management: Enabled
AC Line status: on-line
Battery status: charging
Remaining battery life: 91%
Remaining battery time: unknown
Number of batteries: 1
Battery 0:
Battery status: charging
Remaining battery life: 91%
Remaining battery time: 0:00:00
Resume timer: Thu Jan 1 00:59:59 1970
Resume on ring indicator: disabled
APM Capabilities:
unknown
Without the patch, here is what happens:
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LPCB.ACAD._PSR] (N
ode 0xc2533ca0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (N
ode 0xc2535e60), AE_AML_REGION_LIMIT
APM version: 1.2
APM Management: Enabled
AC Line status: invalid value (0xffffffff)
Battery status: unknown
Remaining battery life: 0%
Remaining battery time: unknown
Number of batteries: 1
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LPCB.ACAD._PSR] (N
ode 0xc2533ca0), AE_AML_REGION_LIMIT
Battery 0:
Battery status: unknown
Remaining battery life: 0%
Remaining battery time: 0:00:00
Resume timer: Thu Jan 1 00:59:59 1970
Resume on ring indicator: disabled
APM Capabilities:
unknown
The kernel supplied with RedHat 9 adds a simmilar patch, although covered
under a kernel option (CONFIG_ACPI_RELAXED_AML) and their version also whines
that the user should inform the laptop manufacturer that they should fix their
BIOS.
I don't really think HP and Toshiba will ever fix their BIOS, as the laptop
works just fine with Windows XP and only Windows is officially supported. I
think FreeBSD (or Intel) should add this to their code, it might help with
some other problem laptops and doesn't harm other machines (my desktop with
Intel Pentium 4 motherboard seems to work just fine with it).
Here is the patch:
--- /sys/contrib/dev/acpica/exfldio.c.orig Wed Apr 30 20:44:08 2003
+++ /sys/contrib/dev/acpica/exfldio.c Fri May 2 19:13:04 2003
@@ -220,7 +220,29 @@
FieldDatumByteOffset, ObjDesc->CommonField.AccessByteWidth,
RgnDesc->Region.Node->Name.Ascii, RgnDesc->Region.Length));
+#if 1 /* ACPI_RELAXED_AML */
+ {
+ /*
+ * Allow access to the field if it is within the region size
+ * rounded up to a multiple of the access byte width. This
+ * overcomes "off-by-one" programming errors in the AML often
+ * found in Toshiba laptops. These errors were allowed by
+ * the Microsoft ASL compiler.
+ */
+ UINT32 rounded_length = ACPI_ROUND_UP(RgnDesc->Region.Length,
+ ObjDesc->CommonField.AccessByteWidth);
+
+ if (rounded_length < (ObjDesc->CommonField.BaseByteOffset
+ + FieldDatumByteOffset
+ + ObjDesc->CommonField.AccessByteWidth)) {
+ return_ACPI_STATUS (AE_AML_REGION_LIMIT);
+ } else {
+ return_ACPI_STATUS (AE_OK);
+ }
+ }
+#else
return_ACPI_STATUS (AE_AML_REGION_LIMIT);
+#endif
}
return_ACPI_STATUS (AE_OK);
Below is a full verbose dmesg from my Omnibook with the patch applied:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri May 2 18:36:43 CEST 2003
root@gold.home.inlimbo.org:/usr/src/sys/i386/compile/DISKLESS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc072a000.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc072a2c8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc072a37c.
Preloaded elf module "/boot/kernel/uftdi.ko" at 0xc072a428.
Preloaded elf module "/boot/kernel/ucom.ko" at 0xc072a4d4.
Preloaded elf module "/boot/kernel/smbios.ko" at 0xc072a580.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc072a62c.
Calibrating clock(s) ... i8254 clock: 1193109 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
Calibrating TSC clock ... TSC clock: 1063129086 Hz
Timecounter "TSC" frequency 1063129086 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 1066MHz (1063.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 259522560 (247 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000088fff, 557056 bytes (136 pages)
0x0000000000751000 - 0x000000000f277fff, 246575104 bytes (60199 pages)
0x000000000f700000 - 0x000000000f777fff, 491520 bytes (120 pages)
avail memory = 244187136 (232 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f61e0
bios32: Entry = 0xfd850 (c00fd850) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd800+0x18a
pnpbios: Found PnP BIOS data at 0xc00f6210
pnpbios: Entry = f0000:9c33 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
smbios0: <System Management BIOS> at iomem 0xf61c0-0xf61de on motherboard
smbios0: Version: 2.03, Revision: 0.08
acpi0: <HP-MCD RSDT > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8002402c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdf10
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 30 A 0x60 3 4 5 9 10 11
embedded 0 30 B 0x61 3 4 5 9 10 11
embedded 0 30 C 0x62 3 4 5 9 10 11
embedded 0 30 D 0x63 3 4 5 9 10 11
embedded 2 8 A 0x68 10
embedded 2 0 A 0x60 9
slot 1 2 2 A 0x62 5
embedded 2 3 A 0x63 5
embedded 2 4 A 0x60 9
embedded 2 4 B 0x61 9
slot 2 2 6 A 0x63 5
embedded 0 0 A 0x60 3 4 5 9 10 11
embedded 0 0 B 0x61 3 4 5 9 10 11
embedded 0 0 C 0x62 3 4 5 9 10 11
embedded 0 0 D 0x63 3 4 5 9 10 11
embedded 0 31 A 0x62 5
embedded 0 31 B 0x61 9
embedded 0 29 A 0x60 9
embedded 0 29 B 0x63 5
embedded 0 29 C 0x62 5
embedded 0 2 A 0x60 3 4 5 9 10 11
embedded 0 2 B 0x61 3 4 5 9 10 11
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 2 dev 8 func 0
AcpiOsDerivePciId: bus 2 dev 4 func 0
AcpiOsDerivePciId: bus 2 dev 4 func 1
AcpiOsDerivePciId: bus 2 dev 2 func 0
AcpiOsDerivePciId: bus 2 dev 6 func 0
AcpiOsDerivePciId: bus 2 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 2, max = 3, width = 1
May 3 09:35:38 test last message repeated 9 times
Timecounter "ACPI-fast" frequency 3579545 Hz
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.PCI0.LPCB.LNKA irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\_SB_.PCI0.LPCB.LNKB irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.2.1
\_SB_.PCI0.LPCB.LNKA irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.29.0
\_SB_.PCI0.LPCB.LNKD irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.29.1
\_SB_.PCI0.LPCB.LNKC irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.29.2
\_SB_.PCI0.LPCB.LNKC irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.31.0
\_SB_.PCI0.LPCB.LNKB irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.31.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.PCI0.LPCB.LNKA irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\_SB_.PCI0.LPCB.LNKB irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.2.1
\_SB_.PCI0.LPCB.LNKA irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.29.0
\_SB_.PCI0.LPCB.LNKD irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.29.1
\_SB_.PCI0.LPCB.LNKC irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.29.2
\_SB_.PCI0.LPCB.LNKC irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.31.0
\_SB_.PCI0.LPCB.LNKB irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 00000000, size 0, enabled
found-> vendor=0x8086, dev=0x3575, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e8000000, size 27, enabled
map[14]: type 1, range 32, base e0000000, size 19, enabled
found-> vendor=0x8086, dev=0x3577, revid=0x03
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 3, range 32, base f0000000, size 27, enabled
map[14]: type 1, range 32, base e0080000, size 19, enabled
found-> vendor=0x8086, dev=0x3577, revid=0x00
bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x09 (2250 ns)
powerspec 1 supports D0 D1 D3 current D0
map[20]: type 4, range 32, base 00001800, size 5, enabled
found-> vendor=0x8086, dev=0x2482, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[20]: type 4, range 32, base 00001820, size 5, enabled
found-> vendor=0x8086, dev=0x2484, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type 4, range 32, base 00001840, size 5, enabled
found-> vendor=0x8086, dev=0x2487, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
found-> vendor=0x8086, dev=0x2448, revid=0x41
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 000001f0, size 3, enabled
map[14]: type 4, range 32, base 000003f4, size 2, enabled
map[18]: type 4, range 32, base 00000170, size 3, enabled
map[1c]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 4, range 32, base 00001860, size 4, enabled
map[24]: type 1, range 32, base e0100000, size 10, enabled
found-> vendor=0x8086, dev=0x248a, revid=0x01
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001880, size 5, enabled
found-> vendor=0x8086, dev=0x2483, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
agp0: <Intel 82830M (830M GMCH) SVGA controller> mem 0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 9 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 5 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 5 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xe0200000-0xe02fffff
pcib1: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\_SB_.PCI0.LPCB.LNKA irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.0.0
\_SB_.PCI0.LPCB.LNKC irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.2.0
\_SB_.PCI0.LPCB.LNKD irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.3.0
\_SB_.PCI0.LPCB.LNKA irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.4.0
\_SB_.PCI0.LPCB.LNKB irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.4.1
\_SB_.PCI0.LPCB.LNKD irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.6.0
\_SB_.PCI0.LPCB.LNKE irq 10: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.8.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.PCI0.LPCB.LNKA irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.0.0
\_SB_.PCI0.LPCB.LNKC irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.2.0
\_SB_.PCI0.LPCB.LNKD irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.3.0
\_SB_.PCI0.LPCB.LNKA irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.4.0
\_SB_.PCI0.LPCB.LNKB irq 9: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.4.1
\_SB_.PCI0.LPCB.LNKD irq 5: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.6.0
\_SB_.PCI0.LPCB.LNKE irq 10: [ 3 4 5 7 9 10 11 12 14 15] low,level,sharable 2.8.0
pci2: <ACPI PCI bus> on pcib1
pci2: physical bus=2
map[10]: type 1, range 32, base e0205000, size 11, enabled
map[14]: type 1, range 32, base e0200000, size 14, enabled
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=2, slot=0, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0112, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00002440, size 4, enabled
found-> vendor=0x125d, dev=0x2838, revid=0x01
bus=2, slot=2, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 00002000, size 8, enabled
found-> vendor=0x125d, dev=0x1988, revid=0x12
bus=2, slot=3, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1217, dev=0x6933, revid=0x01
bus=2, slot=4, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0087, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1217, dev=0x6933, revid=0x01
bus=2, slot=4, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0087, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0204000, size 12, enabled
map[14]: type 4, range 32, base 00002400, size 6, enabled
found-> vendor=0x8086, dev=0x1031, revid=0x41
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xe0200000-0xe0203fff,0xe0205000-0xe02057ff irq 9 at device 0.0 on pci2
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
pcib1: device fwohci0 requested decoded memory range 0xe0205000-0xe02057ff
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:02:3f:ff:0c:ff:99:cc
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: loop=0, retry=0
May 3 09:35:38 test last message repeated 4 times
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:ff:99:cc
fwe0: bpf attached
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
pci2: <simple comms> at device 2.0 (no driver attached)
pcm0: <ESS Technology Allegro-1> port 0x2000-0x20ff irq 5 at device 3.0 on pci2
pcm0: failed to enable memory mapping!
pcib1: device pcm0 requested decoded I/O range 0x2000-0x20ff
pcm0: <ESS Technology ES1988 AC97 Codec (id = 0x45838308)>
pcm0: Codec features 20 bit DAC, 20 bit ADC, 5 bit master volume, ESS Technology Stereo Enhancement
pcm0: Primary codec extended features double rate PCM
pcm0: sndbuf_setmap 93c000, 1000; 0xd5700000 -> 93c000
pcm0: sndbuf_setmap 94f000, 1000; 0xd5701000 -> 94f000
pcm0: sndbuf_setmap 951000, 1000; 0xd5702000 -> 951000
pcm0: sndbuf_setmap 95a000, 1000; 0xd5703000 -> 95a000
pcm0: sndbuf_setmap 95c000, 1000; 0xd5704000 -> 95c000
malloc() of "64" with the following non-sleepablelocks held:
exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc25e6180) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322
malloc() of "16" with the following non-sleepablelocks held:
exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc25e6180) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322
malloc() of "16" with the following non-sleepablelocks held:
exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc25e6180) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322
malloc() of "16" with the following non-sleepablelocks held:
exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc25e6180) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322
malloc() of "64" with the following non-sleepablelocks held:
exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc25e6180) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322
malloc() of "16" with the following non-sleepablelocks held:
exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc25e6180) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322
malloc() of "16" with the following non-sleepablelocks held:
exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc25e6180) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322
malloc() of "16" with the following non-sleepablelocks held:
exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc25e6180) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322
cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> at device 4.0 on pci2
pcib1: device cbb0 requested decoded memory range 0xe0200000-0xe02fffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: matched entry for 2.4.INTA (source \_SB_.PCI0.LPCB.LNKA)
pcib1: slot 4 INTA is routed to irq 9
cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> at device 4.1 on pci2
pcib1: device cbb1 requested decoded memory range 0xe0200000-0xe02fffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib1: matched entry for 2.4.INTB (source \_SB_.PCI0.LPCB.LNKB)
pcib1: slot 4 INTB is routed to irq 9
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x2400-0x243f mem 0xe0204000-0xe0204fff irq 10 at device 8.0 on pci2
pcib1: device fxp0 requested decoded memory range 0xe0204000-0xe0204fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:02:3f:36:ef:8b
fxp0: PCI IDs: 8086 1031 103c 0021 0041
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe0100000-0xe01003ff at device 31.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI ff ff
ata1: after reset mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
sio0: irq maps: 0x1 0x9 0x1 0x1
sio0 port 0x3f8-0x3ff irq 3 drq 1 on acpi0
sio0: type 16550A
acpi_acad0: <AC adapter> on acpi0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
unknown: not probed (disabled)
May 3 09:35:38 test last message repeated 4 times
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xdf800-0xdffff,0xd8000-0xdc7ff,0xd0000-0xd0fff on isa0
pmtimer0 on isa0
adv0 failed to probe on isa0
aha0: status reg test failed ff
May 3 09:35:38 test last message repeated 5 times
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
send phy_config root_node=-1 gap_count=1
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
cbb0: Unsupported card type detected
cbb1: Unsupported card type detected
ad0: success setting UDMA100 on Intel ICH3 chip
GEOM: new disk ad0
acpi_cmbat0: battery initialization done, tried 1 times
bus_explore done
sbp_post_explore (sbp_cold=2)
ar: FreeBSD check1 failed
ad0: <IC25N030ATCS04-0/CA3OA71A> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=12 dmamode=34 udmamode=69 cblid=1
ata1-master: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata1-master: success setting PIO4 on Intel ICH3 chip
acd0: <TOSHIBA DVD-ROM SD-R2102/1018> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:160 s(CHS):0/1/1 e(CHS):47/12/63 s:63 l:48132
[1] f:80 typ:7 s(CHS):47/13/1 e(CHS):1023/15/63 s:48195 l:41945715
[2] f:00 typ:131 s(CHS):1023/15/63 e(CHS):1023/15/63 s:41994288 l:15995952
[3] f:00 typ:15 s(CHS):1023/15/63 e(CHS):1023/15/63 s:57990240 l:614880
GEOM: Configure ad0s1, start 32256 length 24643584 end 24675839
GEOM: Configure ad0s2, start 24675840 length 21476206080 end 21500881919
GEOM: Configure ad0s3, start 21501075456 length 8189927424 end 29691002879
GEOM: Configure ad0s4, start 29691002880 length 314818560 end 30005821439
MBREXT Slice 5 on ad0s4:
[0] f:00 typ:130 s(CHS):1023/15/63 e(CHS):1023/15/63 s:63 l:614817
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s5, start 32256 length 314786304 end 314818559
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
malloc() of "4096" with the following non-sleepablelocks held:
exclusive sleep mutex ifnet r = 0 (0xc05c79c0) locked @ nfsclient/bootp_subr.c:1696
malloc() of "4096" with the following non-sleepablelocks held:
exclusive sleep mutex ifnet r = 0 (0xc05c79c0) locked @ nfsclient/bootp_subr.c:1696
start IR DMA 0x0
Sending DHCP Discover packet from interface fwe0 (02:02:3f:ff:99:cc)
fwohci0: maxdesc: 4
Sending DHCP Discover packet from interface fxp0 (00:02:3f:36:ef:8b)
Received DHCP Offer packet on fxp0 from 192.168.176.1 (accepted) (no root path)
Sending DHCP Request packet from interface fxp0 (00:02:3f:36:ef:8b)
Received DHCP Ack packet on fxp0 from 192.168.176.1 (accepted) (got root path)
DHCP timeout for interface fwe0
fxp0 at 192.168.176.10 server 192.168.176.1 server name DHCPserver boot file pxeboot
subnet mask 255.255.255.0 router 192.168.176.1 rootfs 192.168.176.1:/ hostname test.home.inlimbo.org
Shutdown interface fwe0
Adjusted interface fxp0
Mounting root from nfs:
NFS ROOT: 192.168.176.1:/
start_init: trying /sbin/init
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030503091505.F41707>