Date: Thu, 15 Jan 2004 15:21:40 -0800 (PST) From: Dorin H <bj93542@yahoo.com> To: rihad <rihad@mail.ru> Cc: freebsd-current@freebsd.org Subject: Re: ATA activity LED Message-ID: <20040115232140.80346.qmail@web12602.mail.yahoo.com> In-Reply-To: <4006B229.8000501@mail.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
--- rihad <rihad@mail.ru> wrote: <snip> > >>>> > >>>>> Why is the disk activity LED always on in 5-C? <snip> > > > I added "hw.ata.atapi_dma=1" to /boot/loader.conf > and rebooted. Now I > got UDMA33 on primary slave, too. Other than that, > the output of dmesg > is basically the same, but the devices were probed > (?) twice: IMHO, you have displayed two boots sequences (before and after you added "hw.ata.atapi_dma=1"). dmesg | less to check. /Dorin. > $ dmesg | grep -e ^ata -e ^ad -e ^acd > atapci0: <Intel ICH2 UDMA100 controller> port > 0xfc00-0xfc0f at device > 31.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > ad0: 29325MB <Maxtor 6E030L0> [59582/16/63] at > ata0-master UDMA100 > acd0: DVDROM <LITEON DVD-ROM LTD-165H> at ata0-slave > PIO4 > atapci0: <Intel ICH2 UDMA100 controller> port > 0xfc00-0xfc0f at device > 31.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > ata0-slave: DMA limited to UDMA33, non-ATA66 cable > or device > ad0: 29325MB <Maxtor 6E030L0> [59582/16/63] at > ata0-master UDMA100 > acd0: DVDROM <LITEON DVD-ROM LTD-165H> at ata0-slave > UDMA33 > $ > <snip> /Dorin. __________________________________ Do you Yahoo!? Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040115232140.80346.qmail>