Date: Mon, 2 Oct 2000 10:44:36 -0400 (EDT) From: Vivek Khera <khera@kciLink.com> To: stable@freebsd.org Subject: bt0 kernel log messages Message-ID: <14808.40788.16853.106698@onceler.kciLink.com>
next in thread | raw e-mail | index | archive | help
I got these log messages on my nightly report:
> (da0:bt0:0:0:0): CCB 0xc7828880 - timed out
> (da0:bt0:0:0:0): CCB 0xc7828880 - timed out
> bt0: No longer in timeout
> (da0:bt0:0:0:0): CCB 0xc78293c0 - timed out
> (da0:bt0:0:0:0): CCB 0xc78293c0 - timed out
> bt0: No longer in timeout
What does this indicate? I'm preparing to put this box into service
soon, so I'd like to know if it is something to address now while it
is in testing mode.
This is FreeBSD 4.1.1-STABLE from last monday. Here's the dmesg.boot
output:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-STABLE #0: Mon Sep 25 17:42:31 EDT 2000
khera@yertle.kciLink.com:/u/yertle2/usr.obj/amd/onceler/u/onceler1/usr/src/sys/LORAX
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 199216145 Hz
CPU: Pentium/P54C (199.22-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (131072K bytes)
avail memory = 128008192 (125008K bytes)
Preloaded elf kernel "kernel" at 0xc02b2000.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Intel PIIX3 ATA controller> at 7.1
de0: <Digital 21140 Fast Ethernet> port 0x6000-0x607f mem 0xe0800000-0xe080007f irq 9 at device 17.0 on pci0
de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:f8:03:1e:19
pci0: <S3 Trio graphics accelerator> at 18.0 irq 10
bt0: <Buslogic Multi-Master SCSI Host Adapter> port 0x6100-0x6103 mem 0xe0801000-0xe0801fff irq 11 at device 19.0 on pci0
bt0: BT-948 FW Rev. 5.05R Ultra Narrow SCSI Host Adapter, SCSI ID 7, 192 CCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default
Waiting 5 seconds for SCSI devices to settle
de0: enabling 10baseT port
Mounting root from ufs:/dev/da0s1a
da0 at bt0 bus 0 target 0 lun 0
da0: <SEAGATE ST31055N 0532> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 1010MB (2069860 512 byte sectors: 64H 32S/T 1010C)
da1 at bt0 bus 0 target 1 lun 0
da1: <SEAGATE ST32550N 0021> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 2047MB (4194058 512 byte sectors: 128H 32S/T 1023C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14808.40788.16853.106698>