Date: Wed, 18 Aug 2004 22:28:11 +0800 From: wsk@gddsn.org.cn To: current@freebsd.org Subject: IBM xseries 345 keyboard & mouse freezes on CURRENT Message-ID: <1092839290.4123677b02ad7@gddsn.org.cn>
next in thread | raw e-mail | index | archive | help
hi,folks:
psm freezes after the kernel booted , but works after disabled acpi module.
under X the mouse works but the keyboad looks freeze except Ctrl+Alt+Del
is it the IBM's hardware problems? and any ideas?
thanks any reply
dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #3: Fri Aug 13 10:31:54 CST 2004
wsk@gx02.eq-gx.ac.cn:/usr/obj/usr/src/sys/IBM01
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a54000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a541f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.90-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 1073590272 (1023 MB)
avail memory = 1041059840 (992 MB)
ACPI APIC Table: <IBM SERONYXP>
MADT: Forcing active-low polarity and level trigger for SCI
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic0 <Version 1.1> irqs 0-15 on motherboard
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM SERONYXP> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0
cpu0: <aCPI CPU> port 0x530-0x537 on acpi0
pcib0: <aCPI Host-PCI bridge> on acpi0
pci0: <aCPI PCI bus> on pcib0
pcib0: slot 15 INTA is routed to irq 11
pci0: <display, VGA> at device 6.0 (no driver attached)
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x700-0x70f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x700
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: at 0x1f0 irq 14 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11 at
device 15.2 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebfe000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <aCPI Host-PCI bridge> on acpi0
pci2: <aCPI PCI bus> on pcib1
pcib2: <aCPI Host-PCI bridge> on acpi0
pci4: <aCPI PCI bus> on pcib2
pcib3: <aCPI Host-PCI bridge> on acpi0
pci6: <aCPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0x2500-0x253f
mem 0xfbfe0000-0xfbffffff irq 29 at device 8.0 on pci6
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfe0000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x2500
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:09:6b:71:c6:aa
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0x2540-0x257f
mem 0xfbfc0000-0xfbfdffff irq 30 at device 8.1 on pci6
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfc0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x2540
em1: [GIANT-LOCKED]
em1: Ethernet address: 00:09:6b:71:c6:ab
em1: Speed:N/A Duplex:N/A
pcib4: <aCPI Host-PCI bridge> on acpi0
pci8: <aCPI PCI bus> on pcib4
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2600-0x26ff mem
0xf9fe0000-0xf9feffff,0xf9ff0000-0xf9ffffff irq 27 at device 7.0 on pci8
mpt0: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xf9ff0000
mpt0: [GIANT-LOCKED]
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2700-0x27ff mem
0xf9fc0000-0xf9fcffff,0xf9fd0000-0xf9fdffff irq 28 at device 7.1 on pci8
mpt1: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xf9fd0000
mpt1: [GIANT-LOCKED]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <aT Keyboard> irq 1 on atkbdc0
atkbd: unable to set the command byte.
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: unable to set the command byte.
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROMs> at iomem 0xc9800-0xcd7ff,0xc8000-0xc97ff,0xc0000-0xc7fff on
isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2793896724 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <CD-224E> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <IBM 32P0032a S320 1 1> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at mpt0 bus 0 target 0 lun 0
da0: <LSILOGIC 1030 IM 1000> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 34710MB (71087626 512 byte sectors: 255H 63S/T 4425C)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1092839290.4123677b02ad7>