Date: Thu, 2 Jul 2009 17:25:22 +0200 From: dalibor kollar <dalibor.kollar@gmail.com> Cc: freebsd-hardware@freebsd.org Subject: Fwd: burning speed Message-ID: <712fe3890907020825x71a6389fg5e3d5d4b5ce0c56c@mail.gmail.com> In-Reply-To: <712fe3890907020822r19323658hcc2db2c86a291c4c@mail.gmail.com> References: <852322.72085.qm@web82207.mail.mud.yahoo.com> <712fe3890907020822r19323658hcc2db2c86a291c4c@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
It's UDMA66: (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): CAM Status: SCSI Status Error (probe0:ata1:0:0:0): SCSI Status: Check Condition (probe0:ata1:0:0:0): NOT READY asc:3a,1 (probe0:ata1:0:0:0): Medium not present - tray closed (probe0:ata1:0:0:0): Unretryable error cd0 at ata1 bus 0 target 0 lun 0 acd0: DVDR <ASUS DRW-1814BL/1.14> at ata1-master UDMA66 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 cd0 at ata1 bus 0 target 0 lun 0 cd0: <ASUS DRW-1814BL 1.14> Removable CD-ROM SCSI-0 device cd0: 66.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed I had a problem because of UDMA33 my device was working with. after disabling 80pin cable check in loader.conf, I have UDMA66 now. I'm using 80pin cable, 100%. ----------- dalibor 2009/7/2 Jin Guojun <jguojun@sbcglobal.net> > The spec did not say what its PATA speed is. Check your ATA setting: > > atacontrol list > atacontrol mode $ACD0 > > Substitute $ACD0 as your device name show on probe list. > > Make sure it is in UDMA2 or better (not WDMA2 or PIO#). > If it is in PIO#, try to change it to > > atacontrol mode $ACD0 UDMA6 > > atacontrol will find a better fit for you. > > If your device is in UDMA2 or better, can you send dmesg for your boot up? > > --- On Wed, 7/1/09, dalibor kollar <dalibor.kollar@gmail.com> wrote: > > > From: dalibor kollar <dalibor.kollar@gmail.com> > > Subject: burning speed > > To: freebsd-hardware@freebsd.org > > Date: Wednesday, July 1, 2009, 12:28 PM > > Hello, > > > > I have dvd-drive ASUS DRW-1814BL: > > http://www.asus.com/product.aspx?P_ID=0S8SJw9jibmKbMn5 > > > > when burning dvds with k3b, real burning speed is for first > > ca. 50% of the > > process + - 8x (with manually set to 10x). but then > > something goes wrong. > > Software buffer is on 100%, but buffer of my dvd burner > > jumps between 10% > > and 50% and burning speed for the rest of the burning > > process is between 1x > > and 3x. I'm using verbatim 16x DVD-R for several years, > > never experienced > > any problems of this kind before. > > > > I've tried to burn dvds with latest tkdvd from the ports > > collection, but it > > was the same. tkdvd is not showing current burning speed, > > only estimated > > time remaining till the end of the process. and this time > > is growing all the > > time. burning of 1 dvd with k3b and tkdvd as well lasts > > 15-20 minutes. > > > > anyone any idea what might be wrong? > > ----------- > > > > dalibor > > _______________________________________________ > > freebsd-hardware@freebsd.org > > mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > > To unsubscribe, send any mail to " > freebsd-hardware-unsubscribe@freebsd.org" > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?712fe3890907020825x71a6389fg5e3d5d4b5ce0c56c>