Date: Mon, 9 Aug 2004 09:21:37 +0100 From: Bruce Cran <bruce@cran.org.uk> To: current@freebsd.org Subject: PCMCIA bridge card won't initialise: 'bad Vcc request', 'cbb_power: 0V' Message-ID: <21C8C699-E9DD-11D8-944B-000D93ACEE20@cran.org.uk>
next in thread | raw e-mail | index | archive | help
--Apple-Mail-13--84136162
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
charset=US-ASCII;
format=flowed
I've been attempting to turn an old K6-200 machine into a wireless ADSL
router. I started out by installing FreeBSD 5.2.1, but decided to
upgrade to -CURRENT after a few panics. Under 5.2.1 my wireless card,
which is installed via a PCI-PCMCIA bridge, worked perfectly. Now in
-CURRENT, though, the bridge card fails to initialise: I keep getting:
cbb0: bad Vcc request. ctrl=0xf000ef08, status=0xf000e2c3
cbb_power: 0V
ACPI isn't loaded. This problem looks similar to bug #66290, but I
get the message even if no card is plugged in. Is there anything I
can do to help diagnose where the bug is?
--
Bruce Cran
--Apple-Mail-13--84136162
Content-Transfer-Encoding: 7bit
Content-Type: application/octet-stream;
x-unix-mode=0644;
name="dmesg.log"
Content-Disposition: attachment;
filename=dmesg.log
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Mon Aug 9 08:20:46 BST 2004
brucec@neutron.cran:/usr/obj/usr/src/sys/MYKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06ce000.
Calibrating clock(s) ... i8254 clock: 1193077 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 200455528 Hz
CPU: AMD-K6tm w/ multimedia extensions (200.46-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x561 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x400<<b10>>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 32M bytes
Write Allocate 15-16M bytes: Enable
Hardware Write Allocate Control: Disable
real memory = 33554432 (32 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x0000000001f3ffff, 24223744 bytes (5914 pages)
avail memory = 27561984 (26 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb190
bios32: Entry = 0xfb610 (c00fb610) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb640
pnpbios: Found PnP BIOS data at 0xc00fc1b0
pnpbios: Entry = f0000:c1d8 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
mem: <memory>
random: <entropy source, Software, Yarrow>
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00fde00
PCI-Only Interrupts: 5 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 9 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 D 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x60 255 N 4 3 4 5 7 9 10 11 12 14 15
0x61 255 N 4 3 4 5 7 9 10 11 12 14 15
0x62 255 N 4 3 4 5 7 9 10 11 12 14 15
0x63 255 N 5 3 4 5 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.9.INTA at func 0: 10
$PIR: Found matching pin for 0.10.INTA at func 0: 12
$PIR: Found matching pin for 0.11.INTA at func 0: 5
$PIR: Found matching pin for 0.12.INTA at func 0: 11
$PIR: Found matching pin for 0.12.INTB at func 1: 10
$PIR: Found matching pin for 0.12.INTC at func 2: 12
$PIR: Found matching pin for 0.7.INTD at func 2: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x60 10 Y 4 3 4 5 7 9 10 11 12 14 15
0x61 12 Y 4 3 4 5 7 9 10 11 12 14 15
0x62 5 Y 4 3 4 5 7 9 10 11 12 14 15
0x63 11 Y 5 3 4 5 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 5 10 11 12
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 4 0 0 0 0 4 5 4 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7100, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00006400, size 5, enabled
$PIR: 0:7 INTD routed to irq 11
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 00005f00, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
$PIR: 0:9 INTA routed to irq 10
found-> vendor=0x1180, dev=0x0475, revid=0x80
bus=0, slot=9, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0000000, size 26, enabled
$PIR: 0:10 INTA routed to irq 12
found-> vendor=0x5333, dev=0x8901, revid=0x14
bus=0, slot=10, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
map[10]: type 4, range 32, base 00006800, size 8, enabled
map[14]: type 1, range 32, base e4000000, size 8, enabled
$PIR: 0:11 INTA routed to irq 5
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e4001000, size 12, enabled
$PIR: 0:12 INTA routed to irq 11
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=0, slot=12, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e4002000, size 12, enabled
$PIR: 0:12 INTB routed to irq 10
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=0, slot=12, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e4003000, size 8, enabled
$PIR: 0:12 INTC routed to irq 12
found-> vendor=0x1033, dev=0x00e0, revid=0x02
bus=0, slot=12, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> irq 10 at device 9.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: bad Vcc request. ctrl=0xf000ef08, status=0xf000e2c3
cbb_power: 0V
cbb0: PCI Configuration space:
0x00: 0x04751180 0x02100007 0x06070080 0x00024000
0x10: 0x00000000 0x020000dc 0x20030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a
0x40: 0x030a1154 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x030a1154 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <display, VGA> at device 10.0 (no driver attached)
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x6800
rl0: <RealTek 8139 10/100BaseTX> port 0x6800-0x68ff mem 0xe4000000-0xe40000ff irq 5 at device 11.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:10:a7:17:ab:6e
rl0: [GIANT-LOCKED]
ohci0: <NEC uPD 9210 USB controller> mem 0xe4001000-0xe4001fff irq 11 at device 12.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4001000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe4002000-0xe4002fff irq 10 at device 12.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4002000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 12.2 (no driver attached)
cpu0 on motherboard
pnpbios: 11 devices, largest 102 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
PNP0c01: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x1ffffff, size=0x1f00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
PNP0a03: adding io range 0x4f00-0x4f3f, size=0x40, align=0
PNP0a03: adding io range 0x5f00-0x5f1f, size=0x20, align=0
pnpbios: handle 8 device ID PNP0a03 (030ad041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 9 device ID PNP0501 (0105d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 10 device ID PNP0501 (0105d041)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff,0xfc000-0xfffff,0xf8000-0xfbfff,0xf4000-0xf7fff,0xf0000-0xf3fff on isa0
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0a03> at port 0x4d0-0x4d1 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
Device configuration finished.
Timecounter "TSC" frequency 200455528 Hz quality 800
Timecounters tick every 10.000 msec
pflog0: bpf attached
pfsync0: bpf attached
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting WDMA2 on Intel PIIX4 chip
ad0: <QUANTUM Pioneer SG 2.1A/A05.06> ATA-0 disk at ata0-master
ad0: 2014MB (4124736 sectors), 4092 C, 16 H, 63 S, 512 B
ad0: 1 secs/int, 1 depth queue, WDMA2
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ATAPI_RESET time = 70us
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <Pioneer CD-ROM ATAPI Model DR-A14S 0104/E1.04> CDROM drive at ata1 as master
acd0: read 5511KB/s (5511KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:4124673
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 2111832576 end 2111864831
GEOM: Configure ad0s1a, start 0 length 1415577600 end 1415577599
GEOM: Configure ad0s1b, start 1572864000 length 538968576 end 2111832575
GEOM: Configure ad0s1c, start 0 length 2111832576 end 2111832575
GEOM: Configure ad0s1d, start 1415577600 length 157286400 end 1572863999
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
--Apple-Mail-13--84136162--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?21C8C699-E9DD-11D8-944B-000D93ACEE20>