Date: Fri, 04 Jun 2004 19:28:48 +0200 From: Andreas Moeller <andreas-moeller@gmx.net> To: John Baldwin <jhb@FreeBSD.org> Cc: current@FreeBSD.org Subject: Re: fxp(4) device timeouts ACPI related? Message-ID: <40C0B150.1030702@gmx.net> In-Reply-To: <200406041101.15208.jhb@FreeBSD.org> References: <40BF38B4.6090208@gmx.net> <200406041101.15208.jhb@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------050808000809090504040601 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit >>The ACPI updates predating last weekend seem to have broken my fxp(4) >>card (Intel PRO/100 S, Intel 82550 chip). Without disabling ACPI at the >>loader prompt (set hint.acpi.0.disabled=1) I get the consecutive message >>of the device timing out and network is unusable. >> >>Perhaps this is useful information for everybody desiring to workaround >>the problem or even some developer to have a closer look at it. If a >>more detailed description of my setup is needed, just let me know. > > > Can you get before and after dmesg's and post a diff? Of course. diff is attached, the kernel is an unmodified GENERIC. Regards, -Andreas --------------050808000809090504040601 Content-Type: text/plain; name="dmesg.diff" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.diff" --- dmesg.acpi Fri Jun 4 19:20:30 2004 +++ dmesg.noacpi Fri Jun 4 19:13:15 2004 @@ -20,26 +20,19 @@ npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface -acpi0: <VIA694 MSI ACPI> on motherboard -acpi0: [GIANT-LOCKED] pcibios: BIOS version 2.10 -acpi0: Power Button (fixed) -Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 -acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 -cpu0: <ACPI CPU (3 Cx states)> on acpi0 -acpi_button0: <Power Button> on acpi0 -acpi_button1: <Sleep Button> on acpi0 -pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 -pci0: <ACPI PCI bus> on pcib0 -pcib0: slot 7 INTD is routed to irq 11 -pcib0: slot 7 INTD is routed to irq 11 -pcib0: slot 10 INTA is routed to irq 5 -pcib0: slot 14 INTA is routed to irq 5 +pcib0: <Host to PCI bridge> at pcibus 0 on motherboard +pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard +$PIR: BIOS IRQ 10 for 0.7.INTD does not match link 0x5 irq 11 +pci0: <PCI bus> on pcib0 +$PIR: 0:7 INTD routed to irq 11 +$PIR: 0:7 INTD routed to irq 11 +$PIR: 0:10 INTA routed to irq 11 +$PIR: 0:14 INTA routed to irq 11 agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 -pcib0: slot 1 INTA is routed to irq 11 -pcib1: slot 0 INTA is routed to irq 11 +$PIR: ROUTE_INTERRUPT failed. pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 @@ -66,45 +59,52 @@ uhub1: port error, giving up port 1 uhub1: port error, restarting port 2 uhub1: port error, giving up port 2 -fxp0: <Intel 82550 Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xe3000000-0xe301ffff,0xe3020000-0xe3020fff irq 5 at device 10.0 on pci0 +fxp0: <Intel 82550 Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xe3000000-0xe301ffff,0xe3020000-0xe3020fff irq 11 at device 10.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:02:b3:4c:9c:32 fxp0: [GIANT-LOCKED] -pcm0: <Creative EMU10K1> port 0xe000-0xe01f irq 5 at device 14.0 on pci0 +pcm0: <Creative EMU10K1> port 0xe000-0xe01f irq 11 at device 14.0 on pci0 pcm0: <TriTech TR28023 AC97 Codec> pcm0: [GIANT-LOCKED] -fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 +cpu0 on motherboard +orm0: <Option ROMs> at iomem 0xcc000-0xcd7ff,0xc0000-0xcb7ff on isa0 +pmtimer0 on isa0 +atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 +atkbd0: <AT Keyboard> irq 1 on atkbdc0 +kbd0 at atkbd0 +atkbd0: [GIANT-LOCKED] +psm0: <PS/2 Mouse> irq 12 on atkbdc0 +psm0: [GIANT-LOCKED] +psm0: model IntelliMouse Explorer, device ID 4 +fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 -sio0 port 0x3f8-0x3ff irq 4 on acpi0 -sio0: type 16550A -sio1 port 0x2f8-0x2ff irq 3 on acpi0 -sio1: type 16550A -ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 -ppc0: SMC-like chipset (NIBBLE-only) in NIBBLE mode +ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 +ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode +ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 -atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 -atkbd0: <AT Keyboard> irq 1 on atkbdc0 -kbd0 at atkbd0 -atkbd0: [GIANT-LOCKED] -psm0: <PS/2 Mouse> irq 12 on atkbdc0 -psm0: [GIANT-LOCKED] -psm0: model IntelliMouse Explorer, device ID 4 -orm0: <Option ROMs> at iomem 0xcc000-0xcd7ff,0xc0000-0xcb7ff on isa0 -pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> +sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 +sio0: type 16550A +sio1 at port 0x2f8-0x2ff irq 3 on isa0 +sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 -Timecounter "TSC" frequency 1195217519 Hz quality 800 +unknown: <PNP0303> can't assign resources (port) +unknown: <PNP0f13> can't assign resources (irq) +unknown: <PNP0700> can't assign resources (port) +unknown: <PNP0501> can't assign resources (port) +unknown: <PNP0501> can't assign resources (port) +unknown: <PNP0401> can't assign resources (port) +Timecounter "TSC" frequency 1195216772 Hz quality 800 Timecounters tick every 10.000 msec ad0: 58644MB <IC35L060AVV207-0> [119150/16/63] at ata0-master UDMA100 acd0: DVDROM <TOSHIBA DVD-ROM SD-M1612> at ata1-master PIO4 acd1: CDRW <CR-48XATE> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s1a -fxp0: device timeout --------------050808000809090504040601--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40C0B150.1030702>