Date: Wed, 20 Jan 1999 08:13:40 -0700 (MST) From: "Kenneth D. Merry" <ken@plutotech.com> To: mike@vee.net (Michael Gratton) Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: Adaptec 2920? Message-ID: <199901201513.IAA03325@panzer.plutotech.com> In-Reply-To: <36A5B4C8.4FE82B3@vee.net> from Michael Gratton at "Jan 20, 99 08:49:44 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
Michael Gratton wrote... > Hi people, > > I'm trying to get an Adaptec AHA-2920 working under 3.0-CURRENT, with > not much luck. The adapter has a single Sony DAT drive attached to it, > and everything is terminated corrctly. There's no ID conflicts or > anything. Only the 2920C (which has an Adaptec 7855 on board) is supported. The Adaptec 2920 is a rebadged future domain card. > The kernel is configured with aic0 and the usual scsi stuff. Actually, you need ahc0. The aic0 driver is no longer supported. It is for the AIC-6260/6360 chips. That driver may be supported at some point, but isn't just yet. > Booting hangs after the "Waiting for SCSI devices to settle.." message. > The probe complains about somthing, but I lost the bit of paper the > messages were scribbled on (darn darn darn!). Well, I've got a few questions: - is it a 2920 or a 2920C? - what are the error messages that get printed out? - It sounds like you must be booting off an IDE disk. Can you boot without the DAT drive attached, or without the SCSI controller in the machine? Ken -- Kenneth Merry ken@plutotech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199901201513.IAA03325>