Date: Sun, 20 Sep 2009 23:03:34 -0700 (PDT) From: Jin Guojun <jguojun@sbcglobal.net> To: Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> Cc: current@freebsd.org Subject: Re: Is SATA HOT plug in still supported in Current? Message-ID: <64815.89454.qm@web82206.mail.mud.yahoo.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Only the SATA plug-in message is attached. Plug-in sees an error. The boot-up dmesg is also available at http://www.daemonfun.com/hd-bub/boot-dmesg.txt if it helps. --- On Sun, 9/20/09, Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> wrote: > From: Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> > Subject: Re: Is SATA HOT plug in still supported in Current? > To: "Jin Guojun" <jguojun@sbcglobal.net> > Cc: current@freebsd.org, question@freebsd.org > Date: Sunday, September 20, 2009, 9:04 AM > On Sat, 19 Sep 2009, Jin Guojun > wrote: > > It seems that SATA hot-plug-in is no longer supported > in current -- both 7.2 and 8.0. > > > > I have a GeForce6100PM-M2 motherboard with both PATA > and SATA installed. > > System boots from PATA derives for 6.4, 7.2 and > 8.0-Beta4 with SATA offline. > > > > After system is up, power SATA, 6.4 sees the dirve > right way and disk is automatically attached to > ata2-master. > > > > When boot to both 7.2 and 8.0, hot plug-in SATA drive > does not show any message to the system. > > Issueing command "atacontrol attach ata2" or > "atacontrol reinit ata2" does not get disk online. Without > chnage anything, and just reboot the system, the SATA drive > will show up. > > Can you boot with verbose dmesg enabled, and without the > disk attached, > then plug the disk in after boot? Then please upload > the output of > "dmesg" somewhere and send a link to it to the list? > > Thanks, > > Gavin > [-- Attachment #2 --] Sep 20 22:46:18 w80 lpd[661]: lpd startup: logging=0 Sep 20 22:46:27 w80 login: ROOT LOGIN (root) ON ttyv0 Sep 20 22:48:04 w80 kernel: ata2: CONNECT requested Sep 20 22:48:04 w80 kernel: ata2: reiniting channel .. Sep 20 22:48:04 w80 kernel: ata2: SATA connect time=0ms status=00000113 Sep 20 22:48:04 w80 kernel: ata2: reset tp1 mask=01 ostat0=80 ostat1=00 Sep 20 22:48:04 w80 kernel: ata2: stat0=0x80 err=0xff lsb=0xff msb=0xff Sep 20 22:48:04 w80 last message repeated 2 times Sep 20 22:48:04 w80 kernel: ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 Sep 20 22:48:04 w80 kernel: ata2: reset tp2 stat0=50 stat1=00 devices=0x1 Sep 20 22:48:04 w80 kernel: ata2: reinit done .. Sep 20 22:48:22 w80 login: ROOT LOGIN (root) ON ttyv1
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?64815.89454.qm>