Date: Mon, 04 Feb 2002 21:33:54 -0600 From: Peter Schultz <peter@jocose.org> To: current@freebsd.org Subject: usb mouse won't work Message-ID: <3C5F52A2.1030501@jocose.org>
next in thread | raw e-mail | index | archive | help
FreeBSD does not want to work with my USB mouse. I believe it to be a problem with the motherboard, a Tyan S1834. The mouse does work under BeOS and Windows so I know it's not toast. Also, the mouse works with FreeBSD on my Tyan S1832 motherboard so that's a good sign too. Here's my kernel output: Feb 4 20:51:54 max syslogd: kernel boot file is /boot/kernel/kernel Feb 4 20:51:54 max kernel: Copyright (c) 1992-2002 The FreeBSD Project. Feb 4 20:51:54 max kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Feb 4 20:51:54 max kernel: The Regents of the University of California. All rights reserved. Feb 4 20:51:54 max kernel: FreeBSD 5.0-CURRENT #1: Mon Feb 4 20:32:50 CST 2002 Feb 4 20:51:54 max kernel: root@max.jocose.org:/usr/obj/usr/src/sys/MAXKERNEL Feb 4 20:51:54 max kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc0400000. Feb 4 20:51:54 max kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04000a8. Feb 4 20:51:54 max kernel: Timecounter "i8254" frequency 1193182 Hz Feb 4 20:51:54 max kernel: CPU: Pentium III/Pentium III Xeon/Celeron (933.03-MHz 686-class CPU) Feb 4 20:51:54 max kernel: Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Feb 4 20:51:54 max kernel: Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,S SE> Feb 4 20:51:54 max kernel: real memory = 402587648 (393152K bytes) Feb 4 20:51:54 max kernel: avail memory = 387457024 (378376K bytes) Feb 4 20:51:54 max kernel: Programming 24 pins in IOAPIC #0 Feb 4 20:51:54 max kernel: IOAPIC #0 intpin 2 -> irq 0 Feb 4 20:51:54 max kernel: IOAPIC #0 intpin 16 -> irq 12 Feb 4 20:51:54 max kernel: IOAPIC #0 intpin 17 -> irq 10 Feb 4 20:51:54 max kernel: IOAPIC #0 intpin 19 -> irq 11 Feb 4 20:51:54 max kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Feb 4 20:51:54 max kernel: cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 Feb 4 20:51:54 max kernel: cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 Feb 4 20:51:54 max kernel: io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Feb 4 20:51:54 max kernel: Pentium Pro MTRR support enabled Feb 4 20:51:54 max kernel: Using $PIR table, 8 entries at 0xc00fdb50 Feb 4 20:51:54 max kernel: npx0: <math processor> on motherboard Feb 4 20:51:55 max kernel: npx0: INT 16 interface Feb 4 20:51:55 max kernel: acpi0: <VIA694 AWRDACPI> on motherboard Feb 4 20:51:55 max kernel: acpi0: power button is handled as a fixed feature programming model. Feb 4 20:51:55 max kernel: Timecounter "ACPI" frequency 3579545 Hz Feb 4 20:51:55 max kernel: ACPI-0294: *** Error: Method execution failed, AE_AML_UNINITIALIZED_LOCAL Feb 4 20:51:55 max kernel: can't fetch resources for \_SB_.PCI0.FDC0 - AE_AML_UNINITIALIZED_LOCAL Feb 4 20:51:55 max kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 Feb 4 20:51:55 max kernel: acpi_cpu0: <CPU> on acpi0 Feb 4 20:51:55 max kernel: acpi_cpu1: <CPU> on acpi0 Feb 4 20:51:55 max kernel: acpi_button0: <Power Button> on acpi0 Feb 4 20:51:55 max kernel: acpi_pcib0: <Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 Feb 4 20:51:55 max kernel: pci0: <PCI bus> on acpi_pcib0 Feb 4 20:51:55 max kernel: agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 Feb 4 20:51:55 max kernel: pcib1: <PCI-PCI bridge> at device 1.0 on pci0 Feb 4 20:51:55 max kernel: pci1: <PCI bus> on pcib1 Feb 4 20:51:55 max kernel: pci1: <display, VGA> at device 0.0 (no driver attached) Feb 4 20:51:55 max kernel: isab0: <PCI-ISA bridge> at device 7.0 on pci0 Feb 4 20:51:55 max kernel: isa0: <ISA bus> on isab0 Feb 4 20:51:55 max kernel: atapci0: <VIA 82C596 ATA66 controller> port 0xd000-0xd00f at device 7.1 on pci0 Feb 4 20:51:55 max kernel: ata0: at 0x1f0 irq 14 on atapci0 Feb 4 20:51:55 max kernel: ata1: at 0x170 irq 15 on atapci0 Feb 4 20:51:55 max kernel: uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0 Feb 4 20:51:55 max kernel: usb0: <VIA 83C572 USB controller> on uhci0 Feb 4 20:51:55 max kernel: usb0: USB revision 1.0 Feb 4 20:51:55 max kernel: uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Feb 4 20:51:55 max kernel: uhub0: 2 ports with 2 removable, self powered Feb 4 20:51:55 max kernel: ums0: Logitech USB-PS/2 Mouse, rev 1.00/1.20, addr 2, iclass 3/1 Feb 4 20:51:55 max kernel: ums0: 3 buttons Feb 4 20:51:55 max kernel: ums_attach: sc=0xc1eb0400 Feb 4 20:51:55 max kernel: ums_attach: X 8/8 Feb 4 20:51:55 max kernel: ums_attach: Y 16/8 Feb 4 20:51:55 max kernel: ums_attach: B1 0/1 Feb 4 20:51:55 max kernel: ums_attach: B2 1/1 Feb 4 20:51:55 max kernel: ums_attach: B3 2/1 Feb 4 20:51:55 max kernel: ums_attach: size=3, id=0 Feb 4 20:51:55 max kernel: uscanner0: Hewlett Packard Hewlett Packard ScanJet 5300C, rev 1.00/0.01, addr 3 Feb 4 20:51:55 max kernel: ahc0: <Adaptec 2940 Ultra2 SCSI adapter (OEM)> port 0xd800-0xd8ff mem 0xe5101000-0xe5101fff irq 11 at device 15.0 on pci0 Feb 4 20:51:55 max kernel: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs Feb 4 20:51:55 max kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdc00-0xdc1f mem 0xe5000000-0xe50fffff,0xe5100000-0xe51 00fff irq 10 at device 17.0 on pci0 Feb 4 20:51:55 max kernel: fxp0: Ethernet address 00:a0:c9:10:bc:94 Feb 4 20:51:55 max kernel: nsphy0: <DP83840 10/100 media interface> on miibus0 Feb 4 20:51:55 max kernel: nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Feb 4 20:51:55 max kernel: pcm0: <Creative EMU10K1> port 0xe000-0xe01f irq 12 at device 20.0 on pci0 Feb 4 20:51:55 max kernel: fdc0: cannot reserve I/O port range (1 ports) Feb 4 20:51:56 max kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 Feb 4 20:51:56 max kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Feb 4 20:51:56 max kernel: kbd0 at atkbd0 Feb 4 20:51:56 max kernel: fdc0: cannot reserve I/O port range (1 ports) Feb 4 20:51:56 max kernel: ata: ata0 already exists; skipping it Feb 4 20:51:56 max kernel: ata: ata1 already exists; skipping it Feb 4 20:51:56 max kernel: atkbdc: atkbdc0 already exists; skipping it Feb 4 20:51:56 max kernel: sc: sc0 already exists; skipping it Feb 4 20:51:56 max kernel: vga: vga0 already exists; skipping it Feb 4 20:51:56 max kernel: orm0: <Option ROMs> at iomem 0xc8000-0xcd7ff,0xc0000-0xc7fff on isa0 Feb 4 20:51:56 max kernel: fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 o n isa0 Feb 4 20:51:56 max kernel: fdc0: FIFO enabled, 8 bytes threshold Feb 4 20:51:56 max kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Feb 4 20:51:56 max kernel: pmtimer0 on isa0 Feb 4 20:51:56 max kernel: sc0: <System console> at flags 0x100 on isa0 Feb 4 20:51:56 max kernel: sc0: VGA <16 virtual consoles, flags=0x300> Feb 4 20:51:56 max kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Feb 4 20:51:56 max kernel: APIC_IO: Testing 8254 interrupt delivery Feb 4 20:51:56 max kernel: APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Feb 4 20:51:56 max kernel: acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0% Feb 4 20:51:56 max kernel: ad0: 12416MB <WDC AC313000R> [25228/16/63] at ata0-master UDMA66 Feb 4 20:51:56 max kernel: Waiting 15 seconds for SCSI devices to settle Feb 4 20:51:56 max kernel: cd0 at ahc0 bus 0 target 4 lun 0 Feb 4 20:51:56 max kernel: cd0: <PLEXTOR CD-R PX-W4220T 1.04> Removable CD-ROM SCSI-2 device Feb 4 20:51:56 max kernel: cd0: 10.000MB/s transfers (10.000MHz, offset 8) Feb 4 20:51:56 max kernel: cd0: cd present [256866 x 2048 byte records] Feb 4 20:51:56 max kernel: da0 at ahc0 bus 0 target 0 lun 0 Feb 4 20:51:56 max kernel: da0: <SEAGATE ST39102LW 0004> Fixed Direct Access SCSI-2 device Feb 4 20:51:56 max kernel: da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled Feb 4 20:51:56 max kernel: da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) Feb 4 20:51:56 max kernel: Mounting root from ufs:/dev/ad0s2a Feb 4 20:51:56 max kernel: SMP: AP CPU #1 Launched! Here is after unplugging it and plugging it back in: Feb 4 20:53:37 max kernel: ums0: at uhub0 port 1 (addr 2) disconnected Feb 4 20:53:37 max kernel: ums0: disconnected Feb 4 20:53:37 max kernel: ums0: detached Feb 4 20:53:37 max moused: unable to open /dev/ums0: No such file or directory Feb 4 20:55:15 max kernel: uhub0: port error, restarting port 1 Feb 4 20:55:31 max kernel: usbd_new_device: addr=2, getting first desc failed Feb 4 20:55:31 max kernel: uhub_explore: usb_new_device failed, error=TIMEOUT Feb 4 20:55:31 max kernel: uhub0: device problem, disabling port 1 HTH, Pete... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C5F52A2.1030501>