Date: Fri, 10 Dec 1999 22:09:45 +0100 From: "D. Rock" <rock@dead-end.net> To: Warner Losh <imp@village.org> Cc: mobile@FreeBSD.ORG Subject: Re: cvs commit: src/sys/isa sio.c Message-ID: <38516C19.2859013F@dead-end.net> References: <199912100819.AAA21609@freefall.freebsd.org> <199912100827.BAA20603@harmony.village.org>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
Warner Losh wrote:
>
> In message <199912100819.AAA21609@freefall.freebsd.org> Warner Losh writes:
> : sys/isa sio.c
> ...
> : This makes sio pccards work again. Cards that are active when ejects may
> : not work (but they might, softc goes away quickly).
> ...
> : 1.279 +19 -13 src/sys/isa/sio.c
>
> I found a number of problems with my sio card that I hadn't seen
> before. All of them were related to detach save one embarassing one
> (the card.h removal in a previous commit).
>
> Please test this and lemme know what you think. I'll not guarantee
> that active cards going away won't do bad things to your system. I am
> interested on inactive (and unopened) cards problems.
My card still doesn't work. It does get detected:
sio2 at port 0x3e8-0x3ef irq 15 slot 0 on pccard0
sio2: type 16550A
But the first real access (like a simple "stty -a < /dev/cuaa2") freezes the machine.
Another serial card does work, so I think my configuration is OK.
Daniel
[-- Attachment #2 --]
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x15 (Version 1 info), length = 32
000: 04 01 49 6e 74 65 6c 6c 69 67 65 6e 74 00 50 43
010: 4d 43 49 41 20 46 41 58 2b 4d 4f 44 45 4d 00 ff
Version = 4.1, Manuf = [Intelligent],card vers = [PCMCIA FAX+MODEM]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 00 02 01 00
PCMCIA ID = 0x200, OEM ID = 0x1
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 02 00
Serial port/modem
Tuple #5, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 5c
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #6, code = 0x22 (Functional EXT), length = 9
000: 05 1f 1f 00 04 00 00 04 00
Modem interface capabilities:
Tuple #7, code = 0x22 (Functional EXT), length = 9
000: 06 1f 1f 00 04 00 00 04 00
Modem interface capabilities:
Tuple #8, code = 0x22 (Functional EXT), length = 12
000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5
Data modem services available:
Tuple #9, code = 0x22 (Functional EXT), length = 8
000: 13 06 00 1f 00 02 00 b5
Tuple #10, code = 0x22 (Functional EXT), length = 8
000: 23 06 00 1f 00 02 00 b5
Tuple #11, code = 0x1a (Configuration map), length = 5
000: 01 27 80 ff 67
Reg len = 2, config register addr = 0xff80, last config = 0x27
Registers: XXX--XX-
Tuple #12, code = 0x1b (Configuration entry), length = 19
000: cf 41 99 79 55 3d 86 46 26 4c aa 60 f8 03 07 f0
010: bc 86 28
Config index = 0xf(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 3.5 x 10mA
Max current average over 1 second: 1 x 100mA, ext = 0x46
Max current average over 10 ms: 2 x 100mA
Power down supply current: 4.5 x 1mA
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3f8 block length = 0x8
IRQ modes: Level, Pulse, Shared
IRQs: 4 5 6 7 10 11 12 13 15
Max twin cards = 0
Misc attr: (Audio-BVD2) (Power down supported)
Tuple #13, code = 0x1b (Configuration entry), length = 7
000: 17 08 aa 60 f8 02 07
Config index = 0x17
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #14, code = 0x1b (Configuration entry), length = 7
000: 1f 08 aa 60 e8 03 07
Config index = 0x1f
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #15, code = 0x1b (Configuration entry), length = 7
000: 27 08 aa 60 e8 02 07
Config index = 0x27
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #16, code = 0xff (Terminator), length = 0
2 slots found
[-- Attachment #3 --]
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #12: Fri Dec 10 21:16:47 CET 1999
root@laptop:/usr/src/sys/compile/ROCK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (232.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67108864 (65536K bytes)
avail memory = 62140416 (60684K bytes)
Preloaded elf kernel "kernel" at 0xc02db000.
VESA: v2.0, 1024k memory, flags:0x0, mode table:0xc00c8cf6 (c0008cf6)
VESA: Copyright 1994 TRIDENT MICROSYSTEMS INC.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
vga-pci0: <Trident model 9397 VGA-compatible display device> irq 9 at device 2.0 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 3.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 ATA controller> at device 3.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 9 at device 3.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> at device 3.3 on pci0
pcic-pci0: <TI PCI-1131 PCI-CardBus Bridge> at device 10.0 on pci0
pcic-pci1: <TI PCI-1131 PCI-CardBus Bridge> at device 10.1 on pci0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <6 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0: <VLSI 82C146> at irq 10 on isa0
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
unknown0: <PNP0c02> at port 0x4d0-0x4d1,0xff00-0xff41,0xff80-0xff8f,0x10-0x1f,0x398-0x399,0x22,0x24-0x3d,0x50-0x52,0x72-0x77,0x90-0x9f,0xa4-0xad,0xb0-0xbd,0x2100-0x216f,0x2178-0x21ef,0x21f8-0x21ff,0x46e8 on isa0
unknown1: <PNP0c02> at port 0x80,0x1260-0x1263,0x2260-0x2263,0x3260-0x3263,0x4260-0x4263,0x5260-0x5263,0x6260-0x6263,0x7260-0x7263,0x8260-0x8263,0x9260-0x9263,0xa260-0xa263,0xb260-0xb263,0xc260-0xc263,0xd260-0xd263,0xe260-0xe263,0xf260-0xf263 iomem 0xfff80000-0xfffdffff,0xfffe0000-0xffffffff on isa0
unknown2: <PNP0c01> at iomem 0-0x9ffff,0xe0000-0xfffff,0x100000-0x3ffffff on isa0
unknown3: <PNP0200> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0000> can't assign resources
unknown4: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown5: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown6: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown: <PNP0800> can't assign resources
unknown7: <PNP0a03> at port 0xcf8-0xcff on isa0
sio0: <Generic IRDA-compatible device> at port 0x2f8-0x2ff irq 3 drq 3 on isa0
sio0: type 16550A
unknown: <PNP0f13> can't assign resources
sio1: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0
sio1: type 16550A
unknown: <PNP0700> can't assign resources
unknown: <PNP0400> can't assign resources
unknown8: <ESS0006> at port 0x800-0x807 on isa0
joy0: <ESS0001 PnP Joystick> at port 0x201 on isa0
pcm0: <ESS1869> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0
unknown9: <PNP0e03> at port 0x3e0-0x3e1 on isa0
ad0: <TOSHIBA MK3205MAV/E0.03 A> ATA-4 disk at ata0 as master
ad0: 3102MB (6354432 sectors), 6304 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, PIO
acd0: <TOSHIBA CD-ROM XM-1802B/1115> CDROM drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s), 128KB buffer, DMA
acd0: supported read types: CD-R, CD-RW, CD-DA stream
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0a
pccard: card inserted, slot 0
ed0 at port 0x240-0x25f irq 11 slot 0 on pccard0
ed0: address 00:80:c8:8b:66:e9, type NE2000 (16 bit)
[-- Attachment #4 --]
machine i386
ident LAPTOP
maxusers 6
options PQ_LARGECACHE
cpu I686_CPU
options COMPAT_43
options SYSVSHM
options SYSVSEM
options SYSVMSG
options MD5
options DDB
options KTRACE
options PERFMON
options UCONSOLE
options INET
pseudo-device ether
pseudo-device loop
pseudo-device bpf
pseudo-device tun
options ICMP_BANDLIM
options FFS
options NFS
options NFS_NOSERVER
options CD9660
options MSDOSFS
options PROCFS
options FFS_ROOT
options SOFTUPDATES
options QUOTA
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
controller scbus0
device da0
device pass0
pseudo-device pty
options MSGBUF_SIZE=20480
controller isa0
options PNPBIOS
controller atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
options ATKBD_DFLT_KEYMAP
makeoptions ATKBD_DFLT_KEYMAP="german.iso"
device psm0 at atkbdc? irq 12
options PSM_HOOKAPM
options PSM_RESETAFTERSUSPEND
device vga0 at isa? port ? conflicts
options VGA_WIDTH90
options VESA
pseudo-device splash
device sc0 at isa?
options MAXCONS=6
options SC_DFLT_FONT
makeoptions SC_DFLT_FONT=iso
options SC_PIXEL_MODE
device npx0 at nexus? port IO_NPX flags 0x0 irq 13
controller ata0
device atadisk0
device atapicd0
options ATA_ENABLE_ATAPI_DMA
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device sio0
device ed0
device pcm0
device sbc0
device apm0 at nexus?
device joy0
controller pci0
controller pcic0 at isa? irq 10
controller card0
options PCIC_RESUME_RESET
controller ppbus0
controller vpo0 at ppbus?
device lpt0 at ppbus?
device ppi0 at ppbus?
device ppc0 at isa? port? irq 7
controller uhci0
controller usb0
device ugen0
[-- Attachment #5 --]
# $FreeBSD: src/etc/pccard.conf.sample,v 1.50 1999/11/21 09:48:15 msmith Exp $
io 0x240-0x400
irq 11 15
memory 0xd4000 96k
#debuglevel 9
card "D-Link" "DE-660"
config 0x20 "ed0" ? 0x10
insert /etc/pccard_ether ed0
remove /etc/pccard_ether ed0 delete down
card "Intelligent" "PCMCIA FAX+MODEM"
config 0x1f "sio2" ?
# config 0x27 "sio3" ?
card "GSM" "DSA Card"
config 0x23 "sio3" ?
# config 0x22 "sio2" ?
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38516C19.2859013F>