Date: Fri, 28 Mar 2008 14:16:02 +0100 From: "Ashant Chalasani" <sys@sellerbay.org> To: freebsd-questions@freebsd.org Cc: jmelo@freebsdbrasil.com.br, eksffa@freebsdbrasil.com.br Subject: Re: tinybsd doesn't have /etc/rc.d/ ? Message-ID: <6a5b467e0803280616h16868bdcmb5c12b6962e92261@mail.gmail.com> In-Reply-To: <6a5b467e0803280434y571fa95exec22778fab0fbd82@mail.gmail.com> References: <6a5b467e0803270601h5590da83w76e159d9c445bbc4@mail.gmail.com> <6a5b467e0803280434y571fa95exec22778fab0fbd82@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Finally got the box to boot, with sshd. I can connect on port 22, and login prompt appears. Very messy though, as this was possible only by copying over /etc from host. Can't figure out when I'm having to do all this, and why TinyBSD 0.9 doesn't work "out-of-the-make". Or am I on a total tangent? Jean? Patrick? Anybody there? On Fri, Mar 28, 2008 at 12:34 PM, Ashant Chalasani <sys@sellerbay.org> wrote: > Still no go on getting sshd to start. A few things have gotten better though.. > > Both /etc/rc and /etc/defaults/rc.conf were missing. Copying these > from host to tinybsd_ap helped. > > init right now looks like: > > -------------------------------------- > Timecounters tick every 1.000 msec > Elan-mmcr driver: MMCR at 0xc5ad7000. PPS support. > Elan-mmcr Soekris net45xx comBIOS ver. 1.23a 20040211 Copyright (C) 2000-2003 > ipfw2 initialized, divert enabled, rule-based forwarding disabled, > default to accept, logging disabled > ad0: 124MB <ZOOMCF 128MB CF040520> at ata0-master PIO4 > Trying to mount root from ufs:/dev/ad0a > WARNING: /mnt was not properly dismounted > Invalid time in clock: check and reset the date! > Loading configuration files. > WARNING: / was not properly dismounted > mtree: line 6: unknown group wheel > cp: /var/log/lastlog: No such file or directory > chmod: /var/log/lastlog: No such file or directory > cp: /var/log/wtmp: No such file or directory > chmod: /var/log/wtmp: No such file or directory > eval: cannot create /var/run/dmesg.boot: No such file or directory > eval: cannot create /var/run/syslogd.sockets: No such file or directory > Starting syslogd. > syslogd: cannot open pid file: No such file or directory > Mar 28 08:52:31 syslogd: cannot create /var/run/log: No such file or directory > syslogd: child pid 83 exited with return code 1 > Flushed all rules. > 00100 allow ip from any to any via lo0 > 00200 deny ip from any to 127.0.0.0/8 > 00300 deny ip from 127.0.0.0/8 to any > Firewall rules loaded. > net.inet.ip.fw.enable: 1 -> 1 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > inet 127.0.0.1 netmask 0xff000000 > Additional routing options:. > Additional IP options:. > Starting sshd. > Missing privilege separation directory: /var/empty > bridge0: Ethernet address: ca:03:78:21:3c:50 > bridge0 > ath0: promiscuous mode enabled > sis0: promiscuous mode enabled > Starting cron. > cron: can't open or create /var/run/cron.pid: No such file or directory > > Fri M1sis0: Applying short cable fix (reg=f5) > sis0: link state changed to UP > ------------------------------------------------- > > /var/log/ and /var/run/ directory contents are: > > [root@fbsd70 /var/log]# l > total 4 > drwxr-xr-x 24 root 0 512 Mar 25 19:37 .. > -rw-r--r-- 1 root 0 0 Mar 27 14:00 lastlog > -rw-r--r-- 1 root 0 0 Mar 27 14:00 wtmp > drwxr-xr-x 2 root 0 512 Mar 27 14:01 . > > [root@fbsd70 /var/run]# l > total 20 > drwxr-xr-x 2 bind 53 512 Mar 25 17:02 named > drwxrwx--- 2 root 69 512 Mar 25 17:02 ppp > drwxr-xr-x 24 root 0 512 Mar 25 19:37 .. > -rw-r--r-- 1 root 0 0 Mar 28 09:36 utmp > -rw-r--r-- 1 root 0 0 Mar 28 09:36 syslogd.sockets > -rw-r--r-- 1 root 0 8879 Mar 28 09:36 dmesg.boot > -rw-r--r-- 1 root 0 0 Mar 28 09:36 clean_var > drwxr-xr-x 4 root 0 512 Mar 28 09:36 . > -rw------- 1 root 0 4 Mar 28 09:36 cron.pid > > Can anyone see why the /var/log and /var/run errors are occuring > inspite of files existing and writable? > > Thanks > Ashant > > > > > > > > On Thu, Mar 27, 2008 at 2:01 PM, Ashant Chalasani <sys@sellerbay.org> wrote: > > The whole of /etc/rc.d/ directory is missing on TinyBSD 0.9. Is this > > by design? I'm hoping someone can throw light on it. > > > > I copied the sshd script manually from my 7.0-REL host onto the flash > > image, as also a simple initialization script that I wrote for setting > > up the network. But it looks like lot more startup scripts from > > /etc/rc.d/ are required to initialize the system. I can ping the > > device on the network port, which means my network script ran. But > > sshd on port 22 isn't available, so I guess /etc/rc.d/sshd failed. > > > > I prefer to copy only the necessary scripts into my target's > > /etc/rc.d/ from the host, and not the whole directory. There are 143 > > scripts in rc.d. Is there a minimal subset of scripts to setup the > > system, networking + basic services (dhclient, sshd etc)? > > > > Thanks > > Ashant > > > > -- > > http://code.google.com/p/tinybsdap/ > > > > > > -- > http://code.google.com/p/tinybsdap/ > -- http://code.google.com/p/tinybsdap/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6a5b467e0803280616h16868bdcmb5c12b6962e92261>