Date: Tue, 15 Feb 2005 21:08:05 +0900 (JST) From: Takahashi Yoshihiro <nyan@jp.FreeBSD.org> To: sos@DeepCore.dk Cc: wnabe@par.odn.ne.jp Subject: Re: UPDATE: ATA mkIII first official patches - please test! Message-ID: <20050215.210805.41634669.nyan@jp.FreeBSD.org> In-Reply-To: <420F907B.1090901@DeepCore.dk> References: <420E331A.3070205@DeepCore.dk> <20050213.135541.74688832.nyan@jp.FreeBSD.org> <420F907B.1090901@DeepCore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
In article <420F907B.1090901@DeepCore.dk> S=F8ren Schmidt <sos@DeepCore.dk> writes: > >>>2. A geometry translation for pc98 is NOT enough. > >>> > >>> Currently, it works only under 4.3GB disk. > = > Wrong, ATA mk3 does solve the problem but using the "current" geomtry= = > set in the drives by the BIOS. However the code missed it in one plac= e = > in ata-lowlevel.c when the code was moved there from ata-disk.c. > This has been fixed and will be present in the next snapshot as I sad= i = > earlier. ATA-mkIII does NOT completely solve the problem. The word 54-58 of the IDENTIFY DEVICE parameter are valid only up to ATA/ATAPI-5. They are obsolete parameters in ATA/ATAPI-6 and later. So using them for a geometry translation has NO effect for recent disks. The following is the result when use SATA 200GB disk on pc98. It is clearly that recognizing a geometry fails. atapci0: <SiI 3114 SATA150 controller> port 0xc000-0xc00f,0x602c-0x602f= ,0x6030-0x6037,0x6028-0x602b,0x6020-0x6027 mem 0x20411000-0x204113ff ir= q 10 at device 17.0 on pci0 ad4: <ST3200822AS/3.01> ATA-6 disk at ata2-master ad4: 190782MB (390721968 sectors), 387621 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, SATA150 BIOS Geometries: 1:1778ffff 0..6008=3D6009 cylinders, 0..255=3D256 heads, 1..255=3D255 = sectors --- TAKAHASHI Yoshihiro <nyan@jp.FreeBSD.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050215.210805.41634669.nyan>