Date: Sat, 18 May 2002 08:03:18 +1000 From: Igor Kulemzin <ivk@kristal.ru> To: Chris Staskewicz <cjs@math.utah.edu> Cc: freebsd-questions@freebsd.org Subject: Re[2]: no fix for digital camera i/o error Message-ID: <140174207126.20020518080318@kristal.ru> In-Reply-To: <Pine.GSO.4.21.0205170852150.14597-100000@sunfish.math.utah.edu> References: <Pine.GSO.4.21.0205170852150.14597-100000@sunfish.math.utah.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Chris, I've got messages like yours when first attach my PenDrive. Upgrade your source tree and recompile kernel with scbus, da, pass options for scsi support and pass, umass, usb, ohci, uhci options for usb support. In my system I've found code for your camera. My system is FreeBSD-4.6-PRERELEASE. Saturday, May 18, 2002, 1:01:37 AM, you wrote: CS> Thanks to the both of you for your help. I'll answer both questions at CS> once. CS> I probably should have included the i/o report from dmesg. CS> (da0:umass-sim0:0:0:0): READ(06). CDB: 8 0 0 0 1 0 CS> (da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:20,0 CS> (da0:umass-sim0:0:0:0): Invalid command operation code CS> da0: reading primary partition table: error reading fsbn 0 CS> To: f3z CS> Here's the listing for /dev/da0 (pass0) regarding character or block CS> device type. CS> crw-r----- 2 root operator 13, 0x00010002 Apr 11 18:26 /dev/da0 CS> crw------- 1 root operator 31, 0 Apr 11 18:26 /dev/pass0 CS> To: Igor CS> grep -i OLYMPUS /usr/src/sys/cam/scsi/scsi_da.c did not find anything. CS> I used to mount the camera as a Mass storage device (successfully) when I CS> used the Penguin with a Red Hat OS. >> Friday, May 17, 2002, 11:35:03 AM, you wrote: >> >> CS> This one has been bugging me for about month now, and I have yet to find >> CS> the answer on the internet. If anyone helps out, I'd be more than happy >> CS> to pass along some pictures of Rembrant (sp?) that I took recently in >> CS> Amsterdam (they're still on my camera!). >> >> CS> FreeBSD 4.4-Release >> CS> even using the GENERIC kernel (with all the scsi code built in: cam, >> CS> scsibus, etc) the camera is recognized with the correct amount of memory >> CS> (7MB = the space on the Smart Media card). >> >> CS> shell$ dmesg >> CS> da0 at umass-sim0 bus 0 target 0 lun 0 >> CS> da0: <OLYMPUS C-2040ZOOM 1.00> Removable Direct Access SCSI-2 device >> CS> da0: 650KB/s transfers >> CS> da0: 7MB (16000 512 byte sectors: 64H 32S/T 7C) >> >> CS> shell$ camcontrol devlist: >> CS> <OLYMPUS C-2040ZOOM 1.00> at scbus0 target 0 lun 0 (da0,pass0) >> >> CS> But when I mount (both 'mount' and 'mount_msdos') on /dev/da0, I get >> CS> "Input/output error"; mounting on /dev/pass0, gives "Block device required". >> >> CS> Does the code have a bug? Perhaps, has this question plagued anyone else >> CS> enough to where 4.6R will have the fix? >> >> CS> Thank you all so much, >> >> CS> Chris. -- Saturday, May 18, 2002 7:55:52 AM Best regards, Igor Kulemzin Amursky Crystall E-mail: ivk@kristal.ru -> Microsoft, is that some kind of toilet paper? -> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?140174207126.20020518080318>