Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 6 Nov 2023 09:53:56 -0700
From:      The Doctor <doctor@doctor.nl2k.ab.ca>
To:        Baptiste Daroussin <bapt@freebsd.org>
Cc:        Glen Barber <gjb@freebsd.org>, freebsd-current@freebsd.org, freebsd-stable@freebsd.org, freebsd-snapshots@freebsd.org, FreeBSD Release Engineering Team <re@freebsd.org>
Subject:   Re: Radius challenges in FreeBSD 14.0 Re: FreeBSD 14.0-RC4 Now Available
Message-ID:  <ZUkaJLGmhFrFSuSR@doctor.nl2k.ab.ca>
In-Reply-To: <4k7sqgsiolglrfq35lesmb4qr7l7lcbnmebcdaxs4n7so2vubn@56xwzstht5dy>
References:  <20231103234232.GK1289@FreeBSD.org> <ZUfRvHmIqo0wq2ua@doctor.nl2k.ab.ca> <ZUfoyoPlGwwJq5fK@doctor.nl2k.ab.ca> <5p6sszthbhskientm4tki4pq4hyzws4fnmzgq4cagh7yvkrwyo@hhmf5cy4gmsu> <ZUia0xL5cBkOHTxo@doctor.nl2k.ab.ca> <xjwuutjiqy2ltmjfg5rrk3fu2bxdraqdtgsfoye7bkq3veqghu@v5dmwofwuwk7> <efbefkav36ppxj6lciuallwid2iv3acksq7gfztjwfwmyomaxq@cjnvpita5sni> <ZUkF5vK8bRKg_L1U@doctor.nl2k.ab.ca> <4k7sqgsiolglrfq35lesmb4qr7l7lcbnmebcdaxs4n7so2vubn@56xwzstht5dy>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Nov 06, 2023 at 04:31:04PM +0100, Baptiste Daroussin wrote:
> On Mon, Nov 06, 2023 at 08:27:34AM -0700, The Doctor wrote:
> > On Mon, Nov 06, 2023 at 09:50:18AM +0100, Baptiste Daroussin wrote:
> > > On Mon, Nov 06, 2023 at 09:04:15AM +0100, Baptiste Daroussin wrote:
> > > > On Mon, Nov 06, 2023 at 12:50:43AM -0700, The Doctor wrote:
> > > > > On Mon, Nov 06, 2023 at 08:43:05AM +0100, Baptiste Daroussin wrote:
> > > > > > On Sun, Nov 05, 2023 at 12:11:06PM -0700, The Doctor wrote:
> > > > > > > On Sun, Nov 05, 2023 at 10:32:44AM -0700, The Doctor wrote:
> > > > > > > > On Fri, Nov 03, 2023 at 11:42:32PM +0000, Glen Barber wrote:
> > > > > > > > > The fourth RC build of the 14.0-RELEASE release cycle is now available.
> > > > > > > > > 
> > > > > > > > > Installation images are available for:
> > > > > > > > > 
> > > > > > > > > o 14.0-RC4 amd64 GENERIC
> > > > > > > > > 
> > > > > > > > >
> > > > > > > > 
> > > > > > > > I am having a problem witb Freeradius and GNU radius. 
> > > > > > > > 
> > > > > > > > Anyone else?
> > > > > > > > 
> > > > > > > > 
> > > > > > > 
> > > > > > > I found the problem.  Replace /usr/lib/libncursesw.so as a symbolic
> > > > > > > link to /lib/libncursesw.so.9
> > > > > > 
> > > > > > can you provide more inputs here, please where do you get your freeradious or
> > > > > > gnu radius implementation from, what is failing an so on?
> > > > > > 
> > > > > > Best regards,
> > > > > > Bapt
> > > > > 
> > > > > freeradius looks like a TLS issue with openssl 3
> > > > > 
> > > > > .
> > > > > 
> > > > > gnu Radius was biuld by me and not a port.
> > > > > 
> > > > > Trying to recode is a challenge.
> > > > > 
> > > > > What is happening is that 
> > > > > 
> > > > > the so file is not being recognised so
> > > > > I have to symlink in order to get GNU radius 1.6.X to work .
> > > > > 
> > > > > It will work with /lib/libncursesw.so.9 if the so file is found in 
> > > > > /usr/lib .
> > > > 
> > > > OK I will dig into gnu-radius, and fix the port if needed! thank you
> > > > 
> > > > Best regards,
> > > > Bapt
> > > 
> > > I just checked here, and I built gnu-radius on a vanilla freebsd 14.0 rc4 and a
> > > vanilla 15 current, and in both case it perfectly links to libncursesw.so.9 and
> > > does not require any change of the .so, at least from all the binary analysis
> > > that I have done, do you have a specific command that will expose the issue?
> > > 
> > > Can you provide me you gnu-radius package as created by pkg create gnu-radius ?
> > > 
> > > Best regards,
> > > Bapt
> > 
> > Try to build from ports, here is what I get
> > 
> > cc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I../include -I../include/radius -I../include/radius -I../lib -I../gnu -I../gnu -I/usr/local/include/guile/1.8 -I/usr/local/include -isystem /usr/local/include -D_THREAD_SAFE  -DSYSCONFDIR=\"/usr/local/etc\" -DRADPID_DIR=\"/var/run\" -DRADLOG_DIR=\"/var/log\" -DRADIUS_DATADIR=\"/usr/local/share/radius/1.6.1\" -DRADIUS_LIBDIR=\"/usr/local/lib/radius/1.6.1\" -I/usr/local/include/ -I/usr/local/include -fno-strict-aliasing -O2 -pipe  -fstack-protector-strong -fno-strict-aliasing  -MT builddbm.o -MD -MP -MF .deps/builddbm.Tpo -c -o builddbm.o builddbm.c
> > builddbm.c:101:13: warning: call to undeclared function 'grad_dbm_insert'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
> >         if (grad_dbm_insert(closure->dbmfile, named, contentd)) {
> > 		    ^
> > 		    builddbm.c:141:13: warning: call to undeclared function 'grad_dbm_create'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
> > 			    if (grad_dbm_create(db_file, &closure.dbmfile)) {
> > 					^
> > 					builddbm.c:147:39: error: incompatible function pointer types passing 'int (DBM_closure *, User_symbol *)' (aka 'int (DBM_closure *, struct user_symbol *)') to parameter of type 'int (*)(void *, grad_symbol_t *)' (aka 'int (*)(void *, struct symbol *)') [-Wincompatible-function-pointer-types]
> > 						grad_symtab_iterate(user_tab, append_symbol, &closure);
> > 										      ^~~~~~~~~~~~~
> > 										      ../include/radius/symtab.h:48:11: note: passing argument to parameter 'fn' here
> > 													       int (*fn)(void *, grad_symbol_t *),
> > 																	      ^
> > 																	      builddbm.c:243:13: warning: call to undeclared function 'paircmp'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
> > 																		      if (paircmp(req, check_tmp) == 0) {
> > 																				  ^
> > 																				  builddbm.c:252:23: warning: using the result of an assignment as a condition without parentheses [-Wparentheses]
> > 																						  if (p = grad_avl_find(check_tmp, DA_MATCH_PROFILE)) {
> > 																								      ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > 																								      builddbm.c:252:23: note: place parentheses around the assignment to silence this warning
> > 																										      if (p = grad_avl_find(check_tmp, DA_MATCH_PROFILE)) {
> > 																													    ^
> > 																																(                                             )
> > 																																builddbm.c:252:23: note: use '==' to turn this assignment into an equality comparison
> > 																																		if (p = grad_avl_find(check_tmp, DA_MATCH_PROFILE)) {
> > 																																				      ^
> > 																																							    ==
> > 																																							    builddbm.c:308:35: warning: passing arguments to a function without a prototype is deprecated in all versions of C and is not supported in C2x [-Wdeprecated-non-prototype]
> > 																																											 (*fn)(buffer, sizeof(buffer), name, i),
> > 																																															   ^
> > 																																															   builddbm.c:323:23: warning: using the result of an assignment as a condition without parentheses [-Wparentheses]
> > 																																																	   if (p = grad_avl_find(*reply_pairs, DA_MATCH_PROFILE)) {
> > 																																																			       ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > 																																																			       builddbm.c:323:23: note: place parentheses around the assignment to silence this warning
> > 																																																					       if (p = grad_avl_find(*reply_pairs, DA_MATCH_PROFILE)) {
> > 																																																								     ^
> > 																																																											 (                                                )
> > 																																																											 builddbm.c:323:23: note: use '==' to turn this assignment into an equality comparison
> > 																																																													 if (p = grad_avl_find(*reply_pairs, DA_MATCH_PROFILE)) {
> > 																																																															       ^
> > 																																																																		     ==
> > 																																																																		     builddbm.c:336:22: warning: call to undeclared function 'fallthrough'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
> > 																																																																				     if (!fallthrough(*reply_pairs))
> > 																																																																							  ^
> > 																																																																							  7 warnings and 1 error generated.
> > 																																																																							  gmake[6]: *** [Makefile:743: builddbm.o] Error 1
> > 																																																																							  gmake[6]: Leaving directory '/usr/ports/net/gnu-radius/work/radius-1.6.1/radiusd'
> > 																																																																							  gmake[5]: *** [Makefile:641: all] Error 2
> > 																																																																							  gmake[5]: Leaving directory '/usr/ports/net/gnu-radius/work/radius-1.6.1/radiusd'
> > 																																																																							  gmake[4]: *** [Makefile:745: all-recursive] Error 1
> > 																																																																							  gmake[4]: Leaving directory '/usr/ports/net/gnu-radius/work/radius-1.6.1'
> > 																																																																							  gmake[3]: *** [Makefile:621: all] Error 2
> > 																																																																							  gmake[3]: Leaving directory '/usr/ports/net/gnu-radius/work/radius-1.6.1'
> > 																																																																							  ===> Compilation failed unexpectedly.
> > 																																																																							  Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to
> > 																																																																							  the maintainer.
> > 																																																																							  *** Error code 1
> > 
> > 																																																																							  Stop.
> > 																																																																							  make[2]: stopped in /usr/ports/net/gnu-radius
> > 																																																																							  *** Error code 1
> > 
> > 																																																																							  Stop.
> > 																																																																							  make[1]: stopped in /usr/ports/net/gnu-radius
> > 																																																																							  *** Error code 1
> > 
> > 																																																																							  Stop.
> > 																																																																							  make: stopped in /usr/ports/net/gnu-radius
> > 
> This is not a ncurses issue.
> 
> Bapt
> 


Care to see the pure code non-ported?

-- 
Member - Liberal International This is doctor@nk.ca Ici doctor@nk.ca
Yahweh, King & country!Never Satan President Republic!Beware AntiChrist rising!
Look at Psalms 14 and 53 on Atheism ; unsubscribe from Google Groups to be seen
Suffering will continue until we stop believing lies. -unknown Beware https://mindspring.com



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ZUkaJLGmhFrFSuSR>