Date: Sat, 5 Jun 2004 14:20:19 -0500 From: Dan Nelson <dnelson@allantgroup.com> To: Matthias Schuendehuette <msch@snafu.de> Cc: freebsd-current@freebsd.org Subject: Re: IRQ-Routing Problems (ShowStopper) Message-ID: <20040605192018.GB42830@dan.emsphone.com> In-Reply-To: <200406051220.56698.msch@snafu.de> References: <200406051220.56698.msch@snafu.de>
next in thread | previous in thread | raw e-mail | index | archive | help
--PEIAKu/WMn1b1Hv9
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In the last episode (Jun 05), Matthias Schuendehuette said:
> I have still IRQ-Problems on my machine which seem to be ACPI related
> (i.e. which don't occur without ACPI) but seem to have a different
> source than the last shutdown/reboot issue.
>
> The last working kernel is from May 22, after the new ACPI-Code no
> kernel boots with ACPI enabled any more.
>
> The core problem is the handling of IRQ 10 on my machine. This IRQ is
> marked as 'Legacy/ISA' in my BIOS-Settings and is used for my ISA
> "Teles S0/16.3"-ISDN-Card.
I'm having similar problems with IRQs. I haven't reserved any IRQs in
my BIOS (no ISA cards), but with ACPI enabled, my SCSI card doesn't
seem to be getting interrupts, and my soundcard gets probed as pcm2
instead of pcm0.
--- /tmp/dmesg.noacpi
+++ /tmp/dmesg.acpi
-$PIR: 0:7 INTD routed to irq 9
-$PIR: 0:11 INTA routed to irq 3
-$PIR: 0:13 INTA routed to irq 11
-$PIR: 0:14 INTA routed to irq 9
-$PIR: 1:0 INTA routed to irq 11
+pcib0: slot 7 INTD is routed to irq 5
+pcib0: slot 11 INTA is routed to irq 11
+pcib0: slot 13 INTA is routed to irq 10
+pcib0: slot 14 INTA is routed to irq 9
+pcib0: slot 1 INTA is routed to irq 10
+pcib1: slot 0 INTA is routed to irq 10
Full dmesgs attached.
--
Dan Nelson
dnelson@allantgroup.com
--PEIAKu/WMn1b1Hv9
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.noacpi"
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #89: Sat Jun 5 13:57:31 CDT 2004
zsh@micron.danhome.emsphone.com:/usr/src/sys/i386/compile/DIMXPS
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0861000.
Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc086121c.
Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc08612c8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0861374.
Calibrating clock(s) ... i8254 clock: 1193207 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 448055045 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (448.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536870912 (512 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x00000000040fcfff, 55406592 bytes (13527 pages)
0x0000000004100000 - 0x000000001f6b7fff, 458981376 bytes (112056 pages)
avail memory = 515878912 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6a90
bios32: Entry = 0xfd7a0 (c00fd7a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7a0+0x203
pnpbios: Found PnP BIOS data at 0xc00f6ae0
pnpbios: Entry = f0000:9f5d Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 00 04 00 01 0a 01 00 01 20 01 00 01 25 01
00 01 6a 00 02 01 04 01 82 01 0d 01 0e 01 0f 01
20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01
VESA: 56 mode(s) found
VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc078a4c2 (1000022)
VESA: ATI RV200
VESA: ATI Technologies Inc. V200 01.00
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 13 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 D 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 11 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
$PIR: Entry 0.0.INTA has different mask for link 0x60, merging
$PIR: Entry 0.0.INTB has different mask for link 0x61, merging
$PIR: Entry 0.0.INTC has different mask for link 0x62, merging
$PIR: Entry 0.0.INTD has different mask for link 0x63, merging
$PIR: Entry 0.7.INTA has different mask for link 0x60, merging
$PIR: Entry 0.7.INTB has different mask for link 0x61, merging
$PIR: Entry 0.7.INTC has different mask for link 0x62, merging
$PIR: Entry 0.7.INTD has different mask for link 0x63, merging
$PIR: Entry 0.1.INTA has different mask for link 0x60, merging
$PIR: Entry 0.1.INTB has different mask for link 0x61, merging
$PIR: Entry 0.1.INTC has different mask for link 0x62, merging
$PIR: Entry 0.1.INTD has different mask for link 0x63, merging
$PIR: Entry 1.0.INTA has different mask for link 0x60, merging
$PIR: Entry 1.0.INTB has different mask for link 0x61, merging
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x60 255 N 8 3 4 5 7 9 10 11 12 14 15
0x61 255 N 8 3 4 5 7 9 10 11 12 14 15
0x62 255 N 8 3 4 5 7 9 10 11 12 14 15
0x63 255 N 7 3 4 5 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.13.INTA at func 0: 11
$PIR: Found matching pin for 0.14.INTA at func 0: 9
$PIR: Found matching pin for 0.11.INTA at func 0: 3
$PIR: Found matching pin for 0.7.INTD at func 2: 9
$PIR: Found matching pin for 1.0.INTA at func 0: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x60 11 Y 8 3 4 5 7 9 10 11 12 14 15
0x61 9 Y 8 3 4 5 7 9 10 11 12 14 15
0x62 3 Y 8 3 4 5 7 9 10 11 12 14 15
0x63 9 Y 7 3 4 5 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 3 9 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 8 0 0 0 0 0 15 0 8 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base ec000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001460, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001440, size 5, enabled
$PIR: 0:7 INTD routed to irq 9
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
map[90]: type 4, range 32, base 00007000, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base e8200000, size 12, enabled
map[14]: type 1, range 32, base e8000000, size 20, enabled
$PIR: 0:11 INTA routed to irq 3
found-> vendor=0x1013, dev=0x6001, revid=0x01
bus=0, slot=11, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=3
map[10]: type 4, range 32, base 00001000, size 8, enabled
map[14]: type 1, range 64, base e8201000, size 12, enabled
$PIR: 0:13 INTA routed to irq 11
found-> vendor=0x9005, dev=0x0080, revid=0x02
bus=0, slot=13, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e8202000, size 12, enabled
map[14]: type 4, range 32, base 00001400, size 6, enabled
map[18]: type 1, range 32, base e8100000, size 20, enabled
$PIR: 0:14 INTA routed to irq 9
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=14, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xec000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xe8300000-0xe83fffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base f0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xf0000000-0xf7ffffff
map[14]: type 4, range 32, base 00009000, size 8, enabled
pcib1: device (null) requested decoded I/O range 0x9000-0x90ff
map[18]: type 1, range 32, base e8300000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xe8300000-0xe830ffff
$PIR: 1:0 INTA routed to irq 11
found-> vendor=0x1002, dev=0x5157, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
drm0: <ATI Radeon QW RV200 7500> port 0x9000-0x90ff mem 0xe8300000-0xe830ffff,0xf0000000-0xf7ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xec000000 64MB
info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1460-0x146f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1460
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata1-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1440-0x145f irq 9 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, self powered
ugen0: X10 Wireless Technology Inc USB Receiver, rev 1.10/1.00, addr 3
intpm0: <Intel 82371AB Power management controller> port 0x7000-0x700f irq 9 at device 7.3 on pci0
intpm0: Reserved 0x10 bytes for rid 0x90 type 4 at 0x7000
intpm0: I/O mapped 7000
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 8000
pci0: <multimedia, audio> at device 11.0 (no driver attached)
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0xe8201000-0xe8201fff irq 11 at device 13.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
ahc0: Features 0x1def6, Bugs 0x40, Flags 0x20485560
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1400-0x143f mem 0xe8100000-0xe81fffff,0xe8202000-0xe8202fff irq 9 at device 14.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8202000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:90:27:5a:55:01
fxp0: [GIANT-LOCKED]
cpu0 on motherboard
Trying Read_Port at 203
CSC0000: start dependent (0)
CSC0000: adding dma mask 0x2
CSC0000: adding dma mask 0x9
CSC0000: adding irq mask 0x20
CSC0000: adding io range 0x534-0x537, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20
CSC0000: start dependent (1)
CSC0000: adding dma mask 0xa
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0xcb8
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x26f, size=0x10, align=0x20
CSC0000: start dependent (2)
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0xcb8
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x3cb, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x30f, size=0x10, align=0x20
CSC0000: end dependent
CSC0001: start dependent (0)
CSC0001: adding io range 0x200-0x207, size=0x8, align=0x8
CSC0001: start dependent (1)
CSC0001: adding io range 0x208-0x20f, size=0x8, align=0x8
CSC0001: end dependent
CSC0010: adding io range 0x120-0x3af, size=0x8, align=0x8
CSC0003: start dependent (0)
CSC0003: adding irq mask 0x400
CSC0003: adding io range 0x330-0x331, size=0x2, align=0x8
CSC0003: start dependent (1)
CSC0003: adding irq mask 0xcb8
CSC0003: adding io range 0x330-0x361, size=0x2, align=0x8
CSC0003: start dependent (2)
CSC0003: adding io range 0x330-0x3e1, size=0x2, align=0x8
CSC0003: end dependent
pnpbios: 17 devices, largest 126 bytes
PNP0c02: adding io range 0x370-0x371, size=0x2, align=0x1
PNP0c02: adding io range 0xea-0xeb, size=0x2, align=0x1
PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000
PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff, size=0x1ff00000
PNP0c01: adding fixed memory32 range 0xfff80000-0xfffbffff, size=0x40000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x7000-0x700f, size=0x10, align=0x1
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0c02: adding memory32 range 0xdc000-0xdffff, size=0x4000, align=0x4000
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xd1400-0xd3fff, size=0x2c00
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 13 device ID PNP0f13 (130fd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 15 device ID PNP0700 (0007d041)
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0400: adding irq mask 0x80
pnpbios: handle 17 device ID PNP0400 (0004d041)
sc: sc0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe4000-0xeffff,0xdc000-0xdffff,0xc0000-0xcbfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
pcm0: <CS423x> at port 0x220-0x22f,0x388-0x38b,0x534-0x537 irq 5 drq 0,1 on isa0
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 103000, 1000; 0xd70e3000 -> 103000
pcm0: sndbuf_setmap 184000, 1000; 0xd70e4000 -> 184000
unknown: <Game> failed to probe at port 0x200-0x207 on isa0
unknown: <Ctrl> failed to probe at port 0x120-0x127 on isa0
unknown: <MPU> failed to probe at port 0x330-0x331 irq 10 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
speaker0: <PC speaker> at port 0x61 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1 on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xdc000-0xdffff on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Standard parallel printer port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 448055045 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
DUMMYNET initialized (011031)
Linux ELF exec handler installed
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <Maxtor 90845D4/GAS54112> ATA-4 disk at ata0-master
ad0: 8063MB (16514064 sectors), 16383 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
GEOM: new disk ad0
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x08 wdma=0xffffffff udma=0xffffffff cable=40pin
ata1-master: setting PIO0 on Intel PIIX4 chip
ata1-slave: setting PIO4 on Intel PIIX4 chip
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe17:ata0:0:0:0): error 22
(probe17:ata0:0:0:0): Unretryable Error
(probe18:ata0:0:1:0): error 22
(probe18:ata0:0:1:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe1:ata1:0:1:0): error 22
(probe1:ata1:0:1:0): Unretryable Error
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):379/254/63 s:63 l:6104637
[1] f:00 typ:7 s(CHS):380/1/1 e(CHS):1023/254/63 s:6104763 l:10393992
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 3125574144 end 3125606399
GEOM: Configure ad0s2, start 3125638656 length 5321723904 end 8447362559
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
(probe1:ata1:0:1:0): error 6
(probe1:ata1:0:1:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe1:ata1:0:1:0): error 22
(probe1:ata1:0:1:0): Unretryable Error
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
ahc0: Selection Timeout on A:15. 0 SCBs aborted
ahc0: target 4 synchronous at 10.0MHz, offset = 0xf
(probe2:ahc0:0:0:0): Retrying Command
(probe3:ahc0:0:1:0): Retrying Command
ahc0: target 0 synchronous at 20.0MHz, offset = 0x1f
(ahc0:A:1:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:1:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x3f
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <QUANTUM QM39100TD-S N495> Fixed Direct Access SCSI-2 device
pass0: Serial Number PCB=20-115991-05; HDA=329900650656
pass0: 20.000MB/s transfers (20.000MHz, offset 31), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <QUANTUM ATLAS_V_36_SCA 0230> Fixed Direct Access SCSI-3 device
pass1: Serial Number 143025550103
pass1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass2 at ahc0 bus 0 target 4 lun 0
pass2: <TEAC CD-R55S 1.0R> Removable CD-ROM SCSI-2 device
pass2: Serial Number 8709867C
pass2: 10.000MB/s transfers (10.000MHz, offset 15)
pass3 at ata1 bus 0 target 0 lun 0
pass3: <IOMEGA ZIP 100 13.A> Removable Direct Access SCSI-0 device
pass3: 3.300MB/s transfers
pass4 at ata1 bus 0 target 1 lun 0
pass4: <LITE-ON LTR-52246S 6S0F> Removable CD-ROM SCSI-0 device
pass4: 16.000MB/s transfers
GEOM: new disk cd0
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM QM39100TD-S N495> Fixed Direct Access SCSI-2 device
da0: Serial Number PCB=20-115991-05; HDA=329900650656
da0: 20.000MB/s transfers (20.000MHz, offset 31), Tagged Queueing Enabled
da0: 8683MB (17783250 512 byte sectors: 255H 63S/T 1106C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS_V_36_SCA 0230> Fixed Direct Access SCSI-3 device
da1: Serial Number 143025550103
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 35020MB (71722776 512 byte sectors: 255H 63S/T 4464C)
GEOM: new disk cd1
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
cd1 at ata1 bus 0 target 1 lun 0
cd1: <LITE-ON LTR-52246S 6S0F> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
(da2:ata1:0:0:0): error 6
(da2:ata1:0:0:0): Unretryable Error
da2 at ata1 bus 0 target 0 lun 0
da2: <IOMEGA ZIP 100 13.A> Removable Direct Access SCSI-0 device
da2: 3.300MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ahc0:0:4:0): Retrying Command
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <TEAC CD-R55S 1.0R> Removable CD-ROM SCSI-2 device
cd0: Serial Number 8709867C
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [280193 x 2048 byte records]
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
[0] f:80 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 9097127424 end 9097159679
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:63231777
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:165 s(CHS):864/0/1 e(CHS):367/254/63 s:63231840 l:8482320
GEOM: Configure da1s1, start 32256 length 32374669824 end 32374702079
GEOM: Configure da1s4, start 32374702080 length 4342947840 end 36717649919
(da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): CAM Status: SCSI Status Error
(da2:ata1:0:0:0): SCSI Status: Check Condition
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
(da2:ata1:0:0:0): (da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
Unretryable error
(da2:ata1:0:0:0): error 6
(da2:ata1:0:0:0): Unretryable Error
Opened disk da2 -> 6
(da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): CAM Status: SCSI Status Error
(da2:ata1:0:0:0): SCSI Status: Check Condition
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
(da2:ata1:0:0:0): (da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
Unretryable error
(da2:ata1:0:0:0): error 6
(da2:ata1:0:0:0): Unretryable Error
Opened disk da2 -> 6
(da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): CAM Status: SCSI Status Error
(da2:ata1:0:0:0): SCSI Status: Check Condition
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
(da2:ata1:0:0:0): (da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
Unretryable error
(da2:ata1:0:0:0): error 6
(da2:ata1:0:0:0): Unretryable Error
Opened disk da2 -> 6
GEOM: Configure da1s4a, start 0 length 100663296 end 100663295
GEOM: Configure da1s4b, start 100663296 length 100663296 end 201326591
GEOM: Configure da1s4c, start 0 length 4342947840 end 4342947839
GEOM: Configure da1s4e, start 201326592 length 100663296 end 301989887
GEOM: Configure da1s4f, start 301989888 length 4040957952 end 4342947839
GEOM: Configure vol/danroot, start 0 length 100663296 end 100663295
GEOM: Configure vol/danvar, start 0 length 100663296 end 100663295
Mounting root from ufs:/dev/da1s4a
start_init: trying /sbin/init
GEOM: Configure vol/danvar, start 0 length 100663296 end 100663295
WARNING: /usr: ACLs flag on fs but no ACLs support
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
Accounting enabled
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
--PEIAKu/WMn1b1Hv9
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.acpi"
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #89: Sat Jun 5 13:57:31 CDT 2004
zsh@micron.danhome.emsphone.com:/usr/src/sys/i386/compile/DIMXPS
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0861000.
Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc086121c.
Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc08612c8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0861374.
Calibrating clock(s) ... i8254 clock: 1193205 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 448054770 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (448.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536870912 (512 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x00000000040fcfff, 55406592 bytes (13527 pages)
0x0000000004100000 - 0x000000001f6b7fff, 458981376 bytes (112056 pages)
avail memory = 515878912 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6a90
bios32: Entry = 0xfd7a0 (c00fd7a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7a0+0x203
pnpbios: Found PnP BIOS data at 0xc00f6ae0
pnpbios: Entry = f0000:9f5d Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 00 04 00 01 0a 01 00 01 20 01 00 01 25 01
00 01 6a 00 02 01 04 01 82 01 0d 01 0e 01 0f 01
20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01
VESA: 56 mode(s) found
VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc078a4c2 (1000022)
VESA: ATI RV200
VESA: ATI Technologies Inc. V200 01.00
random: <entropy source, Software, Yarrow>
acpi0: <PTLTD RSDT> on motherboard
acpi0: [GIANT-LOCKED]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 13 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 13 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 D 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 11 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 2, max = 16777211, width = 16777209
ACPI timer looks BAD min = 1, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 1, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 16777211, width = 16777209
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 1, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 6, width = 4
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.13.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.13.1
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.13.2
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.13.3
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.14.0
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.14.1
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.14.2
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.14.3
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.15.0
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.15.1
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.15.2
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.15.3
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.16.0
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.16.1
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.16.2
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.16.3
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.0.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.0.1
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.0.2
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.0.3
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.1
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.2
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.3
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.1.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.1.1
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.1.2
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.1.3
ACPI PCI link before setting link priority:
\\_SB_.PCI0.ISA_.LNKA:
interrupts: 3 4 5 7 9 10 11 12
penalty: 4190 4190 3190 4190 3190 3190 3190 4190
references: 7
priority: 0
\\_SB_.PCI0.ISA_.LNKB:
interrupts: 3 4 5 7 9 10 11 12
penalty: 4190 4190 3190 4190 3190 3190 3190 4190
references: 7
priority: 0
\\_SB_.PCI0.ISA_.LNKC:
interrupts: 3 4 5 7 9 10 11 12
penalty: 4190 4190 3190 4190 3190 3190 3190 4190
references: 8
priority: 0
\\_SB_.PCI0.ISA_.LNKD:
interrupts: 3 4 5 7 9 10 11 12
penalty: 4190 4190 3190 4190 3190 3190 3190 4190
references: 7
priority: 0
ACPI PCI link before fixup for boot-disabled links:
\\_SB_.PCI0.ISA_.LNKC:
interrupts: 3 4 5 7 9 10 11 12
penalty: 4190 4190 3190 4190 3190 3190 3190 4190
references: 8
priority: 29520
\\_SB_.PCI0.ISA_.LNKA:
interrupts: 3 4 5 7 9 10 11 12
penalty: 4190 4190 3190 4190 3190 3190 3190 4190
references: 7
priority: 25830
\\_SB_.PCI0.ISA_.LNKB:
interrupts: 3 4 5 7 9 10 11 12
penalty: 4190 4190 3190 4190 3190 3190 3190 4190
references: 7
priority: 25830
\\_SB_.PCI0.ISA_.LNKD:
interrupts: 3 4 5 7 9 10 11 12
penalty: 4190 4190 3190 4190 3190 3190 3190 4190
references: 7
priority: 25830
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.PCI0.ISA_.LNKA irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.13.0
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.13.1
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.13.2
\\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.13.3
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.14.0
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.14.1
\\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.14.2
\\_SB_.PCI0.ISA_.LNKA irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.14.3
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.15.0
\\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.15.1
\\_SB_.PCI0.ISA_.LNKA irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.15.2
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.15.3
\\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.16.0
\\_SB_.PCI0.ISA_.LNKA irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.16.1
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.16.2
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.16.3
\\_SB_.PCI0.ISA_.LNKA irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.0.0
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.0.1
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.0.2
\\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.0.3
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNKA irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.0
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.1
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.2
\\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.3
\\_SB_.PCI0.ISA_.LNKA irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.1.0
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.1.1
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.1.2
\\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base ec000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001460, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001440, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.ISA_.LNKD)
pcib0: slot 7 INTD is routed to irq 5
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[90]: type 4, range 32, base 00007000, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base e8200000, size 12, enabled
map[14]: type 1, range 32, base e8000000, size 20, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.ISA_.LNKC)
pcib0: slot 11 INTA is routed to irq 11
found-> vendor=0x1013, dev=0x6001, revid=0x01
bus=0, slot=11, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 00001000, size 8, enabled
map[14]: type 1, range 64, base e8201000, size 12, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.ISA_.LNKA)
pcib0: slot 13 INTA is routed to irq 10
found-> vendor=0x9005, dev=0x0080, revid=0x02
bus=0, slot=13, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e8202000, size 12, enabled
map[14]: type 4, range 32, base 00001400, size 6, enabled
map[18]: type 1, range 32, base e8100000, size 20, enabled
pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.ISA_.LNKB)
pcib0: slot 14 INTA is routed to irq 9
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=14, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xec000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xe8300000-0xe83fffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base f0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xf0000000-0xf7ffffff
map[14]: type 4, range 32, base 00009000, size 8, enabled
pcib1: device (null) requested decoded I/O range 0x9000-0x90ff
map[18]: type 1, range 32, base e8300000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xe8300000-0xe830ffff
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.ISA_.LNKA)
pcib0: slot 1 INTA is routed to irq 10
pcib1: slot 0 INTA is routed to irq 10
found-> vendor=0x1002, dev=0x5157, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
drm0: <ATI Radeon QW RV200 7500> port 0x9000-0x90ff mem 0xe8300000-0xe830ffff,0xf0000000-0xf7ffffff irq 10 at device 0.0 on pci1
info: [drm] AGP at 0xec000000 64MB
info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1460-0x146f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1460
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata1-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1440-0x145f irq 5 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, self powered
ugen0: X10 Wireless Technology Inc USB Receiver, rev 1.10/1.00, addr 3
intpm0: <Intel 82371AB Power management controller> port 0x7000-0x700f irq 9 at device 7.3 on pci0
intpm0: Reserved 0x10 bytes for rid 0x90 type 4 at 0x7000
intpm0: I/O mapped 7000
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 8000
pci0: <multimedia, audio> at device 11.0 (no driver attached)
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0xe8201000-0xe8201fff irq 10 at device 13.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
ahc0: Features 0x1def6, Bugs 0x40, Flags 0x20485560
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1400-0x143f mem 0xe8100000-0xe81fffff,0xe8202000-0xe8202fff irq 9 at device 14.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8202000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:90:27:5a:55:01
fxp0: [GIANT-LOCKED]
mss_probe: no address given, try 0x530
mss_detect - chip revision 0x0a
mss_detect() - Detected CS4236
pcm0: <CS4236> port 0x530-0x537 on acpi0
device_attach: pcm0 attach returned 6
mss_probe: no address given, try 0x530
mss_detect - chip revision 0x0a
mss_detect() - Detected CS4236
pcm1: <CS4236> port 0x530-0x537 on acpi0
device_attach: pcm1 attach returned 6
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x9 0x19 0x9 0x9
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect - chip revision 0x0a
mss_detect() - Detected CS4236
pcm0: <CS4236> port 0x530-0x537 on acpi0
device_attach: pcm0 attach returned 6
mss_detect - chip revision 0x0a
mss_detect() - Detected CS4236
pcm1: <CS4236> port 0x530-0x537 on acpi0
device_attach: pcm1 attach returned 6
unknown: not probed (disabled)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
CSC0000: start dependent (0)
CSC0000: adding dma mask 0x2
CSC0000: adding dma mask 0x9
CSC0000: adding irq mask 0x20
CSC0000: adding io range 0x534-0x537, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20
CSC0000: start dependent (1)
CSC0000: adding dma mask 0xa
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0xcb8
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x26f, size=0x10, align=0x20
CSC0000: start dependent (2)
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0xcb8
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x3cb, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x30f, size=0x10, align=0x20
CSC0000: end dependent
CSC0001: start dependent (0)
CSC0001: adding io range 0x200-0x207, size=0x8, align=0x8
CSC0001: start dependent (1)
CSC0001: adding io range 0x208-0x20f, size=0x8, align=0x8
CSC0001: end dependent
CSC0010: adding io range 0x120-0x3af, size=0x8, align=0x8
CSC0003: start dependent (0)
CSC0003: adding irq mask 0x400
CSC0003: adding io range 0x330-0x331, size=0x2, align=0x8
CSC0003: start dependent (1)
CSC0003: adding irq mask 0xcb8
CSC0003: adding io range 0x330-0x361, size=0x2, align=0x8
CSC0003: start dependent (2)
CSC0003: adding io range 0x330-0x3e1, size=0x2, align=0x8
CSC0003: end dependent
sc: sc0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe4000-0xeffff,0xdc000-0xdffff,0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
pcm2: <CS423x> at port 0x220-0x22f,0x388-0x38b,0x534-0x537 irq 3 drq 0,1 on isa0
pcm2: [GIANT-LOCKED]
pcm2: sndbuf_setmap 103000, 1000; 0xd70e7000 -> 103000
pcm2: sndbuf_setmap 106000, 1000; 0xd70e8000 -> 106000
unknown: <Game> failed to probe at port 0x200-0x207 on isa0
unknown: <Ctrl> failed to probe at port 0x120-0x127 on isa0
unknown: <MPU> failed to probe at port 0x330-0x331 irq 11 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 448054770 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
DUMMYNET initialized (011031)
Linux ELF exec handler installed
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <Maxtor 90845D4/GAS54112> ATA-4 disk at ata0-master
ad0: 8063MB (16514064 sectors), 16383 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
GEOM: new disk ad0
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x08 wdma=0xffffffff udma=0xffffffff cable=40pin
ata1-master: setting PIO0 on Intel PIIX4 chip
ata1-slave: setting PIO4 on Intel PIIX4 chip
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe17:ata0:0:0:0): error 22
(probe17:ata0:0:0:0): Unretryable Error
(probe18:ata0:0:1:0): error 22
(probe18:ata0:0:1:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe1:ata1:0:1:0): error 22
(probe1:ata1:0:1:0): Unretryable Error
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):379/254/63 s:63 l:6104637
[1] f:00 typ:7 s(CHS):380/1/1 e(CHS):1023/254/63 s:6104763 l:10393992
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 3125574144 end 3125606399
GEOM: Configure ad0s2, start 3125638656 length 5321723904 end 8447362559
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
(probe1:ata1:0:1:0): error 6
(probe1:ata1:0:1:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe1:ata1:0:1:0): error 22
(probe1:ata1:0:1:0): Unretryable Error
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
ahc0: Selection Timeout on A:15. 0 SCBs aborted
ahc0: target 4 synchronous at 10.0MHz, offset = 0xf
(probe2:ahc0:0:0:0): Retrying Command
(probe3:ahc0:0:1:0): Retrying Command
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State in Message-out phase, at SEQADDR 0x16c
Card was paused
ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0xe4, ARG_2 = 0x2
HCNT = 0x0 SCBPTR = 0x0
SCSIPHASE[0x4] SCSISIGI[0xb6] ERROR[0x0] SCSIBUSL[0x80]
LASTPHASE[0xa0] SCSISEQ[0x12] SBLKCTL[0xa] SCSIRATE[0x18]
SEQCTL[0x10] SEQ_FLAGS[0x40] SSTAT0[0x2] SSTAT1[0x1]
SSTAT2[0x10] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac]
SXFRCTL0[0x88] DFCNTRL[0x0] DFSTATUS[0x89]
STACK: 0xe2 0x0 0x164 0x179
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 8
QINFIFO entries: 8 5
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x9]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
16 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
17 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
18 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
19 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
20 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
21 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
22 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
23 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
24 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
25 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
26 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
27 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
28 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
29 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
30 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
31 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
5 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0]
8 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0]
9 SCB_CONTROL[0x0] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 15 16 17 18 19 0 1 2 3 4 6 7 13 12 11 10
Untagged Q(0): 8
Untagged Q(1): 5
Untagged Q(4): 9
>>>>>>>>>>>>>>>>>
(probe6:ahc0:0:4:0): SCB 0x9 - timed out
sg[0] - Addr 0x114080 : Length 32
(probe6:ahc0:0:4:0): BDR message in message buffer
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
(probe6:ahc0:0:4:0): no longer in timeout, status = 34c
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State in Message-out phase, at SEQADDR 0x16c
Card was paused
ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0xe4, ARG_2 = 0x3
HCNT = 0x0 SCBPTR = 0x0
SCSIPHASE[0x4] SCSISIGI[0xb6] ERROR[0x0] SCSIBUSL[0x1]
LASTPHASE[0xa0] SCSISEQ[0x12] SBLKCTL[0xa] SCSIRATE[0x0]
SEQCTL[0x10] SEQ_FLAGS[0x40] SSTAT0[0x2] SSTAT1[0x1]
SSTAT2[0x10] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac]
SXFRCTL0[0x88] DFCNTRL[0x0] DFSTATUS[0x89]
STACK: 0xe2 0x0 0x164 0x179
SCB count = 20
Kernel NEXTQSCB = 5
Card NEXTQSCB = 8
QINFIFO entries: 8 9
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info:
0 SCB_CONTROL[0x40] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xe]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
16 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
17 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
18 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
19 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
20 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
21 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
22 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
23 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
24 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
25 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
26 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
27 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
28 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
29 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
30 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
31 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
9 SCB_CONTROL[0x40] SCB_SCSIID[0x47] SCB_LUN[0x3]
8 SCB_CONTROL[0x50] SCB_SCSIID[0x17] SCB_LUN[0x0]
14 SCB_CONTROL[0x40] SCB_SCSIID[0x7] SCB_LUN[0x0]
Kernel Free SCB list: 15 16 17 18 19 0 1 2 3 4 6 7 13 12 11 10
Untagged Q(0): 14
Untagged Q(1): 8
Untagged Q(4): 9
>>>>>>>>>>>>>>>>>
(probe0:ahc0:0:4:3): SCB 0x9 - timed out
sg[0] - Addr 0x26b484 : Length 36
(probe0:ahc0:0:4:3): Other SCB Timeout
ahc0: target 4 using asynchronous transfers
ahc0: Issued Channel A Bus Reset. 3 SCBs aborted
(probe0:ahc0:0:4:3): Request Requeued
(probe0:ahc0:0:4:3): Retrying Command
Infinite interrupt loop, INTSTAT = 60ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
Infinite interrupt loop, INTSTAT = 60ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0x18
Card was paused
ACCUM = 0x5, SINDEX = 0x48, DINDEX = 0xe4, ARG_2 = 0x1
HCNT = 0x0 SCBPTR = 0x0
SCSIPHASE[0x0] SCSISIGI[0x18] ERROR[0x0] SCSIBUSL[0x0]
LASTPHASE[0x1] SCSISEQ[0x1a] SBLKCTL[0xa] SCSIRATE[0x0]
SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x10] SSTAT1[0x0]
SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac]
SXFRCTL0[0x80] DFCNTRL[0x0] DFSTATUS[0x89]
STACK: 0xe2 0x0 0x179 0x17
SCB count = 20
Kernel NEXTQSCB = 8
Card NEXTQSCB = 14
QINFIFO entries: 14 9
Waiting Queue entries: 0:5
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info:
0 SCB_CONTROL[0x50] SCB_SCSIID[0x47] SCB_LUN[0x3] SCB_TAG[0x5]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
16 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
17 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
18 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
19 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
20 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
21 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
22 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
23 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
24 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
25 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
26 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
27 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
28 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
29 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
30 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
31 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
9 SCB_CONTROL[0x50] SCB_SCSIID[0x7] SCB_LUN[0x1]
14 SCB_CONTROL[0x50] SCB_SCSIID[0x17] SCB_LUN[0x1]
5 SCB_CONTROL[0x50] SCB_SCSIID[0x47] SCB_LUN[0x3]
Kernel Free SCB list: 15 16 17 18 19 0 1 2 3 4 6 7 13 12 11 10
Untagged Q(0): 9
Untagged Q(1): 14
Untagged Q(4): 5
>>>>>>>>>>>>>>>>>
(probe0:ahc0:0:4:3): SCB 0x5 - timed out
sg[0] - Addr 0x26b484 : Length 36
(probe0:ahc0:0:4:3): SCB 5: Immediate reset. Flags = 0x660
(probe0:ahc0:0:4:3): no longer in timeout, status = 35b
ahc0: Issued Channel A Bus Reset. 3 SCBs aborted
(probe1:ahc0:0:1:1): Request Requeued
(probe1:ahc0:0:1:1): Retrying Command
(probe2:ahc0:0:0:1): Request Requeued
(probe2:ahc0:0:0:1): Retrying Command
(probe0:ahc0:0:4:3): Request Requeued
(probe0:ahc0:0:4:3): Retrying Command
(ahc0:A:1:1): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
(ahc0:A:1:1): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x3f
ahc0: target 0 synchronous at 20.0MHz, offset = 0x1f
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Selection Timeout on A:4. 0 SCBs aborted
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <QUANTUM QM39100TD-S N495> Fixed Direct Access SCSI-2 device
pass0: Serial Number PCB=20-115991-05; HDA=329900650656
pass0: 20.000MB/s transfers (20.000MHz, offset 31), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <QUANTUM ATLAS_V_36_SCA 0230> Fixed Direct Access SCSI-3 device
pass1: Serial Number 143025550103
pass1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass2 at ata1 bus 0 target 0 lun 0
pass2: <IOMEGA ZIP 100 13.A> Removable Direct Access SCSI-0 device
pass2: 3.300MB/s transfers
pass3 at ata1 bus 0 target 1 lun 0
pass3: <LITE-ON LTR-52246S 6S0F> Removable CD-ROM SCSI-0 device
pass3: 16.000MB/s transfers
GEOM: new disk cd0
GEOM: new disk da0
GEO(da0:ahc0:0:0:0): Retrying Command
M: new disk da1
GEOM: new disk da2
(cd0:ata1:0:1:0): error 6
(cd0:ata1:0:1:0): Unretryable Error
cd0 at ata1 bus 0 target 1 lun 0
cd0: <LITE-ON LTR-52246S 6S0F> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(da2:ata1:0:0:0): error 6
(da2:ata1:0:0:0): Unretryable Error
da2 at ata1 bus 0 target 0 lun 0
da2: <IOMEGA ZIP 100 13.A> Removable Direct Access SCSI-0 device
da2: 3.300MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:1:0): error 6
(cd0:ata1:0:1:0): Unretryable Error
(cd0:ata1:0:1:0): error 6
(cd0:ata1:0:1:0): Unretryable Error
(cd0:ata1:0:1:0): error 6
(cd0:ata1:0:1:0): Unretryable Error
(ahc0:A:1:0): Sending PPR bus_width 1, period 9, offset 3f, ppr_options 2
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State in Message-out phase, at SEQADDR 0x16c
Card was paused
ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0xe4, ARG_2 = 0x3
HCNT = 0x0 SCBPTR = 0x0
SCSIPHASE[0x4] SCSISIGI[0xb6] ERROR[0x0] SCSIBUSL[0x80]
LASTPHASE[0xa0] SCSISEQ[0x12] SBLKCTL[0xa] SCSIRATE[0xc2]
SEQCTL[0x10] SEQ_FLAGS[0x40] SSTAT0[0x2] SSTAT1[0x1]
SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac]
SXFRCTL0[0x88] DFCNTRL[0x0] DFSTATUS[0x89]
STACK: 0xe2 0xe2 0x164 0x179
SCB count = 20
Kernel NEXTQSCB = 8
Card NEXTQSCB = 5
QINFIFO entries: 5
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xe]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
16 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
17 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
18 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
19 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
20 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
21 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
22 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
23 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
24 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
25 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
26 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
27 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
28 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
29 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
30 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
31 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
5 SCB_CONTROL[0x40] SCB_SCSIID[0x7] SCB_LUN[0x0]
14 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x0]
Kernel Free SCB list: 9 15 16 17 18 19 0 1 2 3 4 6 7 13 12 11 10
Untagged Q(0): 5
Untagged Q(1): 14
>>>>>>>>>>>>>>>>>
(da0:ahc0:0:0:0): SCB 0x5 - timed out
sg[0] - Addr 0x1f32dc70 : Length 8
(da0:ahc0:0:0:0): Other SCB Timeout
(da0:ahc0:0:0:0): No other SCB worth waiting for...
(da1:ahc0:0:1:0): SCB 0xe - timed out
sg[0] - Addr 0x114080 : Length 32
(da1:ahc0:0:1:0): BDR message in message buffer
(ahc0:A:1:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(da1:ahc0:0:1:0): no longer in timeout, status = 34c
(da1:ahc0:0:1:0): Retrying Command
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM QM39100TD-S N495> Fixed Direct Access SCSI-2 device
da0: Serial Number PCB=20-115991-05; HDA=329900650656
da0: 20.000MB/s transfers (20.000MHz, offset 31), Tagged Queueing Enabled
da0: 8683MB (17783250 512 byte sectors: 255H 63S/T 1106C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS_V_36_SCA 0230> Fixed Direct Access SCSI-3 device
da1: Serial Number 143025550103
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 35020MB (71722776 512 byte sectors: 255H 63S/T 4464C)
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
[0] f:80 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 9097127424 end 9097159679
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:63231777
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:165 s(CHS):864/0/1 e(CHS):367/254/63 s:63231840 l:8482320
GEOM: Configure da1s1, start 32256 length 32374669824 end 32374702079
GEOM: Configure da1s4, start 32374702080 length 4342947840 end 36717649919
(da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): CAM Status: SCSI Status Error
(da2:ata1:0:0:0): SCSI Status: Check Condition
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
(da2:ata1:0:0:0): (da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
Unretryable error
(da2:ata1:0:0:0): error 6
(da2:ata1:0:0:0): Unretryable Error
Opened disk da2 -> 6
(da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): CAM Status: SCSI Status Error
(da2:ata1:0:0:0): SCSI Status: Check Condition
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
(da2:ata1:0:0:0): (da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
Unretryable error
(da2:ata1:0:0:0): error 6
(da2:ata1:0:0:0): Unretryable Error
Opened disk da2 -> 6
(da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): CAM Status: SCSI Status Error
(da2:ata1:0:0:0): SCSI Status: Check Condition
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
(da2:ata1:0:0:0): (da2:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:ata1:0:0:0): NOT READY asc:3a,0
(da2:ata1:0:0:0): Medium not present
Unretryable error
(da2:ata1:0:0:0): error 6
(da2:ata1:0:0:0): Unretryable Error
Opened disk da2 -> 6
GEOM: Configure da1s4a, start 0 length 100663296 end 100663295
GEOM: Configure da1s4b, start 100663296 length 100663296 end 201326591
GEOM: Configure da1s4c, start 0 length 4342947840 end 4342947839
GEOM: Configure da1s4e, start 201326592 length 100663296 end 301989887
GEOM: Configure da1s4f, start 301989888 length 4040957952 end 4342947839
GEOM: Configure vol/danroot, start 0 length 100663296 end 100663295
GEOM: Configure vol/danvar, start 0 length 100663296 end 100663295
Mounting root from ufs:/dev/da1s4a
start_init: trying /sbin/init
GEOM: Configure vol/danvar, start 0 length 100663296 end 100663295
WARNING: /usr: ACLs flag on fs but no ACLs support
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
Accounting enabled
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
--PEIAKu/WMn1b1Hv9--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040605192018.GB42830>