Date: Mon, 30 Aug 2004 16:06:22 +0200 From: "Poul-Henning Kamp" <phk@phk.freebsd.dk> To: ticso@cicely.de Cc: alpha@freebsd.org Subject: Re: 5.3 beta1 is no go for me. Message-ID: <50860.1093874782@critter.freebsd.dk> In-Reply-To: Your message of "Mon, 30 Aug 2004 14:29:46 %2B0200." <20040830122945.GL59909@cicely12.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
In message <20040830122945.GL59909@cicely12.cicely.de>, Bernd Walter writes:
It does boot the 5.0-RC1 CD I have lying around:
OK boot -v
Entering /boot/kernel/kernel at 0xfffffc000033f150...
sio1: gdb debugging port
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC1 #0: Sat Dec 7 07:38:26 GMT 2002
root@sema.baldwin.cx:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000ca2000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000ca20e0.
AlphaServer 1000/1000A
AlphaServer 1000A 5/400, 400MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000600020117
real memory = 182484992 (174 MB)
Physical memory chunk(s):
0x00cc4000 - 0x0afc3fff, 170917888 bytes (20864 pages)
avail memory = 165093376 (157 MB)
Initializing GEOMetry subsystem
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00008672c0
cia0: <2117x Core Logic chipset>
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x0482, revid=0x05
bus=0, slot=7, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1011, dev=0x0001, revid=0x02
bus=0, slot=8, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x27 (9750 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00010000, size 7, enabled
map[14]: type 1, range 32, base 81301000, size 7, enabled
found-> vendor=0x1011, dev=0x0002, revid=0x24
bus=0, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
map[10]: type 1, range 32, base 81300000, size 12, enabled
map[14]: type 4, range 32, base 00010080, size 6, enabled
map[18]: type 1, range 32, base 81100000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
eisab0: <PCI-EISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on eisab0
pcib1: <PCI-PCI bridge> at device 8.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0x81000000-0x810fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib1
pci2: physical bus=2
map[10]: type 4, range 32, base 00009000, size 8, enabled
map[14]: type 1, range 32, base 81010000, size 12, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x02
bus=2, slot=0, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.7
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x9000-0x90ff mem 0x81010000-
0x81010fff irq 0 at device 0.0 on pci2
pcib1: device isp0 requested decoded memory range 0x81010000-0x81010fff
isp0: using Memory space register mapping
isp0: interrupting at CIA irq 0
isp0: Board Type 1020A, Chip Revision 0x2, resident F/W Revision 5.57.1
isp0: Last F/W revision was 5.57.1
isp0: 256 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
de0: <Digital 21040 Ethernet> port 0x10000-0x1007f mem 0x81301000-0x8130107f irq
3 at device 12.0 on pci0
de0: interrupting at CIA irq 3
de0: DEC 21040 [10Mb/s] pass 2.4
de0: address 00:00:f8:21:89:2f
de0: bpf attached
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x10080-0x100bf mem 0x81100000-0x81
1fffff,0x81300000-0x81300fff irq 5 at device 13.0 on pci0
fxp0: using memory space register mapping
fxp0: interrupting at CIA irq 5
fxp0: Ethernet address 00:d0:b7:49:e6:c9
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc67ff on isa0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata0: interrupting at ISA irq 14
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
ata1: interrupting at ISA irq 15
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f
0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 399987059 Hz (firmware 400000000 Hz)
i8254 clock: 1193156 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: irq maps: 0x201 0x209 0x201 0x201
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39
3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39
3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
procfs registered
Timecounters tick every 0.976 msec
Timecounter "i8254" frequency 1193182 Hz
Timecounter "alpha" frequency 399987059 Hz
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
isp0: driver initiated bus reset of bus 0
GEOM: new disk md0
GEOM: Add md0 hot[0] start 64 length 276 end 339
GEOM: Configure md0c, start 0 length 4423680 end 4423679
de0: autosense failed: cable problem?
(probe4:isp0:0:4:0): Retrying Command
(probe1:isp0:0:1:0): Retrying Command
(probe0:isp0:0:0:0): Retrying Command
(probe4:isp0:0:4:0): error 22
(probe4:isp0:0:4:0): Unretryable Error
pass0 at isp0 bus 0 target 0 lun 0
pass0: <SEAGATE ST32430N 0438> Fixed Direct Access SCSI-2 device
pass0: Serial Number 00390381
GEOM: new disk da0
GEOM: new disk da1
pass0: 10.000MB/s transfers (10.000MHz, offset 12), Tagged Queueing Enabled
pass1 at isp0 bus 0 target 1 lun 0
pass1: <DEC RZ28 (C) DEC D41C> Fixed Direct Access SCSI-2 device
pass1: Serial Number PCB=419243364680(ZG43364680 ); HDA=0000000044464925
pass1: 10.000MB/s transfers (10.000MHz, offset 12), Tagged Queueing Enabled
pass2 at isp0 bus 0 target 4 lun 0
pass2: <DEC RRD43 (C) DEC 1084> Removable CD-ROM SCSI-2 device
pass2: 4.032MB/s transfers (4.032MHz, offset 12)
cd0 at isp0 bus 0 target 4 lun 0
cd0: <DEC RRD43 (C) DEC 1084> Removable CD-ROM SCSI-2 device
cd0: 4.032MB/s transfers (4.032MHz, offset 12)
cd0: cd present [517192 x 512 byte records]
da1 at isp0 bus 0 target 1 lun 0
da1: <DEC RZ28 (C) DEC D41C> Fixed Direct Access SCSI-2 device
da1: Serial Number PCB=419243364680(ZG43364680 ); HDA=0000000044464925
da1: 10.000MB/s transfers (10.000MHz, offset 12), Tagged Queueing Enabled
da1: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
da0 at isp0 bus 0 target 0 lun 0
da0: <SEAGATE ST32430N 0438> Fixed Direct Access SCSI-2 device
da0: Serial Number 00390381
da0: 10.000MB/s transfers (10.000MHz, offset 12), Tagged Queueing Enabled
da0: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C)
GEOM: Add da0 hot[0] start 64 length 276 end 339
GEOM: Configure da0a, start 0 length 268435456 end 268435455
GEOM: Configure da0b, start 268435456 length 364969984 end 633405439
GEOM: Configure da0c, start 0 length 2149071360 end 2149071359
GEOM: Configure da0d, start 633405440 length 268435456 end 901840895
GEOM: Configure da0e, start 901840896 length 268435456 end 1170276351
GEOM: Configure da0f, start 1170276352 length 978795008 end 2149071359
Mounting root from ufs:/dev/md0
WARNING: clock gained 632 days -- CHECK AND RESET THE DATE!
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
/stand/sysinstall running as init on serial console
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
phk@FreeBSD.ORG | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50860.1093874782>