Date: Thu, 24 Jun 2004 21:48:14 +0900 From: UEDA Hiroyuki <ueda@netforest.ad.jp> To: freebsd-stable@freebsd.org Subject: Re: Dell PE750 w/SATA Message-ID: <20040624213552.9C65.UEDA@netforest.ad.jp> In-Reply-To: <20040624120450.GA87979@memnoch.jk.homeunix.net> References: <20040624143806.9C55.UEDA@netforest.ad.jp> <20040624120450.GA87979@memnoch.jk.homeunix.net>
next in thread | previous in thread | raw e-mail | index | archive | help
> > Making a new root filesystem on /dev/aacd0s1a ...
> > Entropy device is blocking. Dance fandango on keyboard to unblock.
>
> If you go digging through the archives here (possibly under the
> freebsd-current mailing list), you'll find a lot of talk about the
> chicken-n-egg situation with startup entropy. I'm not running -CURRENT so
I didn't know such a thing... Study hard, me :p).
> Note the message through -- it looks like it is blocking on lack of
> entropy, and one of the sources for that is keyboard interrupts. If you
> typed on the keyboard for a while you would probably generate enough
> entropy to get the install going again.
Yes! After typing many keys, I can install 5.2-CURRENT-20040623-JPSNAP.iso
:-). dmesg is following:
-----
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT-20040623-JPSNAP #0: Wed Jun 23 02:05:12 GMT 2004
root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09fb000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09fb26c.
ACPI APIC Table: <DELL PE750 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073479680 (1023 MB)
avail memory = 1041027072 (992 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE750> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xece0-0xecff mem 0xfe2e0000-0xfe2fffff irq 18 at device 1.0 on pci1
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:c0:9f:3f:28:7c
em0: Speed:N/A Duplex:N/A
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
aac0: <Dell CERC SATA RAID 2> mem 0xf4000000-0xf7ffffff irq 24 at device 1.0 on pci2
aac0: [FAST]
aac0: Unknown processor 100MHz, 48MB cache memory, optional battery not installed
aac0: Kernel 4.1-0, Build 7028, S/N bb450f
aac0: Supported Options=1097c<WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,ALARM>
uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 29.5 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xdcc0-0xdcff mem 0xfdee0000-0xfdefffff irq 21 at device 2.0 on pci3
em1: [GIANT-LOCKED]
em1: Ethernet address: 00:c0:9f:3f:28:7d
em1: Speed:N/A Duplex:N/A
pci3: <display, VGA> at device 14.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB SATA150 controller> port 0xfea0-0xfeaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc9000-0xccfff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4241N> at ata0-master PIO4
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 38113MB (78057088 sectors)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/aacd0s1a
em0: Link is up 100 Mbps Full Duplex
em0: Link is up 100 Mbps Full Duplex
em0: promiscuous mode enabled
em0: promiscuous mode disabled
-----
Thanks for your advice.
-----
UEDA Hiroyuki <ueda@netforest.ad.jp>
Net Forest Inc., JAPAN
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040624213552.9C65.UEDA>