Date: Thu, 10 Jun 2010 04:45:32 -0700 (PDT) From: subgeometer <biggerbumme@yahoo.co.in> To: freebsd-acpi@freebsd.org Subject: Re: Problem network devices Acer Extensa 5635G Message-ID: <28841924.post@talk.nabble.com> In-Reply-To: <28616663.post@talk.nabble.com> References: <201004122301.45040.g.veniamin@googlemail.com> <28494831.post@talk.nabble.com> <4BE94278.1010101@FreeBSD.org> <28616663.post@talk.nabble.com>
next in thread | previous in thread | raw e-mail | index | archive | help
boot -v output for acer 5635z (sorry about the delay)
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #1: Sun May 9 23:03:50 EST 2010
root@:/usr/obj/usr/src/sys/acer5635z
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz (2095.00-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x400e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 3995230208 (3810 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
netsmb_dev: loaded
kbd1 at kbdmux0
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
acpi_ec0: warning: EC done before starting event wait
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem
0xf0000000-0xf03fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: detected 65532k stolen memory
agp0: aperture size is 256M
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
vgapci1: <VGA-compatible display> mem 0xf0400000-0xf04fffff at device 2.1 on
pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at
device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x003b
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at
device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0010
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf0904800-0xf0904bff
irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci7: <ACPI PCI bus> on pcib2
ath0: <Atheros 9280> irq 19 at device 0.0 on pci7
ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
ath0: cannot map register space
device_attach: ath0 attach returned 6
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib3
alc0: <Atheros AR8131 PCIe Gigabit Ethernet> irq 17 at device 0.0 on pci9
alc0: 0x40000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
alc0: cannot allocate memory resources.
device_attach: alc0 attach returned 6
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at
device 29.0 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x003b
usbus3: <Intel 82801I (ICH9) USB controller> on uhci2
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 19 at
device 29.1 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0010
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at
device 29.2 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x0010
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 16 at
device 29.3 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x0010
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf0904c00-0xf0904fff
irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port
0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem
0xf0904000-0xf09047ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 4> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 5> on atapci0
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xe0000-0xe17ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ad4: 305245MB <WDC WD3200BEVT-22ZCT0 11.01A11> at ata2-master SATA300
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
GEOM: ad4: partition 3 does not start on a track boundary.
GEOM: ad4: partition 3 does not end on a track boundary.
GEOM: ad4: partition 2 does not start on a track boundary.
GEOM: ad4: partition 2 does not end on a track boundary.
acd0: DVDR <Optiarc DVD RW AD-7580S/FX04> at ata3-master SATA150
SMP: AP CPU #1 Launched!
WARNING: ad4s1 expected rawoffset 0, found 63
WARNING: ad4s1a expected rawoffset 0, found 63
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus2
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus7
uhub7: 8 ports with 8 removable, self powered
Root mount waiting for: usbus7
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
ugen7.2: <USBest Technology> at usbus7
umass0: <USBest Technology USB Mass Storage Device, class 0/0, rev
2.00/1.00, addr 2> on usbus7
umass0: SCSI over Bulk-Only; quirks = 0x0000
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata1:0:0:0): CAM Status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI Status: Check Condition
(probe0:ata1:0:0:0): NOT READY asc:3a,1
(probe0:ata1:0:0:0): Medium not present - tray closed
(probe0:ata1:0:0:0): Unretryable error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7580S FX04> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <WLW essentials 8GB 0.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 7701MB (15771759 512 byte sectors: 255H 63S/T 981C)
ugen7.3: <SuYin> at usbus7
Trying to mount root from ufs:/dev/ad4s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 0 2 0 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #1: Sun May 9 23:03:50 EST 2010
root@:/usr/obj/usr/src/sys/acer5635z
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80f41000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2095002262 Hz
CPU: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz (2095.00-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x400e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000f70000 - 0x00000000b0420fff, 2940932096 bytes (718001 pages)
0x00000000b9aa7000 - 0x00000000b9bc9fff, 1191936 bytes (291 pages)
0x00000000b9c0f000 - 0x00000000b9d08fff, 1024000 bytes (250 pages)
0x00000000b9f0f000 - 0x00000000b9f18fff, 40960 bytes (10 pages)
0x00000000b9f1f000 - 0x00000000b9f63fff, 282624 bytes (69 pages)
0x00000000b9f9f000 - 0x00000000b9fe0fff, 270336 bytes (66 pages)
0x00000000b9fff000 - 0x00000000b9ffffff, 4096 bytes (1 pages)
0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages)
avail memory = 3995230208 (3810 MB)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf7510 00024 (v2 PTLTD )
ACPI: XSDT 0xb9ff573b 00074 (v1 ACRSYS ACRPRDCT 06040000 LTP 00000000)
ACPI: FACP 0xb9fe5000 000F4 (v3 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 0xb9fe6000 092A1 (v2 Intel CANTIGA 06040000 INTL 20061109)
ACPI: FACS 0xb9f9efc0 00040
ACPI: HPET 0xb9ffed86 00038 (v1 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 0xb9ffedbe 0003C (v1 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: APIC 0xb9ffedfa 00068 (v1 PTLTD APIC 06040000 LTP 00000000)
ACPI: BOOT 0xb9ffee62 00028 (v1 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 0xb9ffee8a 00176 (v1 ACRSYS ACRPRDCT 06040000 acer 00000000)
ACPI: SSDT 0xb9ff57d7 001A6 (v1 SataRe SataAhci 00001000 INTL 20061109)
ACPI: SSDT 0xb9fe4000 00655 (v1 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0xb9fe3000 00259 (v1 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0xb9fe2000 0020F (v1 PmRef ApTst 00003000 INTL 20061109)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
wlan: <802.11 Link Layer>
wlan: mac acl policy registered
random: <entropy source, Software, Yarrow>
netsmb_dev: loaded
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <ACRSYS ACRPRDCT> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff800000f000 pa 0x4000
AcpiOsDerivePciId: \\_SB_.PCI0.PEGP.VGA_.VGA_ -> bus 0 dev 0 func 0
unknown: I/O range not supported
AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC1 -> bus 0 dev 31 func 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
acpi_ec0: warning: EC done before starting event wait
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 7 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2a40, revid=0x07
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2a42, revid=0x07
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xf0000000, size 22, enabled
map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28,
enabled
map[20]: type I/O Port, range 32, base 0x1800, size 3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2a43, revid=0x07
domain=0, bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xf0400000, size 20, enabled
found-> vendor=0x8086, dev=0x2937, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2938, revid=0x03
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x293c, revid=0x03
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf0904800, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 19
found-> vendor=0x8086, dev=0x293e, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf0700000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2940, revid=0x03
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2946, revid=0x03
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x294a, revid=0x03
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2934, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2935, revid=0x03
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2936, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2939, revid=0x03
domain=0, bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x293a, revid=0x03
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf0904c00, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2448, revid=0x93
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2919, revid=0x03
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2929, revid=0x03
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 16 messages
map[10]: type I/O Port, range 32, base 0x1818, size 3, enabled
map[14]: type I/O Port, range 32, base 0x180c, size 2, enabled
map[18]: type I/O Port, range 32, base 0x1810, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x1808, size 2, enabled
map[20]: type I/O Port, range 32, base 0x18e0, size 5, enabled
map[24]: type Memory, range 32, base 0xf0904000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2930, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 64, base 0, size 8, enabled
map[20]: type I/O Port, range 32, base 0x1c00, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem
0xf0000000-0xf03fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xf0000000
agp0: detected 65532k stolen memory
agp0: aperture size is 256M
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
vgapci0: using IRQ 256 for MSI
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
vgapci1: <VGA-compatible display> mem 0xf0400000-0xf04fffff at device 2.1 on
pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at
device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 50
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x003b
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at
device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x0010
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf0904800-0xf0904bff
irq 19 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0904800
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 2
pcib1: subordinate bus 4
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib2: domain 0
pcib2: secondary bus 7
pcib2: subordinate bus 7
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci7: <ACPI PCI bus> on pcib2
pci7: domain=0, physical bus=7
found-> vendor=0x168c, dev=0x002a, revid=0x01
domain=0, bus=7, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D3 current D0
MSI supports 1 message
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0, size 16, memory disabled
pcib2: matched entry for 7.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
ath0: <Atheros 9280> irq 19 at device 0.0 on pci7
pcib2: ath0 requested unsupported memory range 0-0xffffffffffffffff
(decoding 0-0, 0-0)
ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
ath0: cannot map register space
device_attach: ath0 attach returned 6
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib3: domain 0
pcib3: secondary bus 9
pcib3: subordinate bus 9
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.RP06 -
AE_NOT_FOUND
pci9: <ACPI PCI bus> on pcib3
pci9: domain=0, physical bus=9
found-> vendor=0x1969, dev=0x1063, revid=0xc0
domain=0, bus=9, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0, size 18, memory disabled
map[18]: type I/O Port, range 32, base 0, size 7, port disabled
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
pcib3: slot 0 INTA is routed to irq 17
alc0: <Atheros AR8131 PCIe Gigabit Ethernet> irq 17 at device 0.0 on pci9
pcib3: alc0 requested unsupported memory range 0-0xffffffffffffffff
(decoding 0-0, 0-0)
alc0: 0x40000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
alc0: cannot allocate memory resources.
device_attach: alc0 attach returned 6
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at
device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x003b
usbus3: <Intel 82801I (ICH9) USB controller> on uhci2
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 19 at
device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x0010
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at
device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x0010
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 16 at
device 29.3 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18c0
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x0010
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf0904c00-0xf0904fff
irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0904c00
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 10
pcib4: subordinate bus 10
pcib4: I/O decode 0xf000-0xfff
pcib4: no prefetched decode
pcib4: Subtractively decoded bridge.
pci10: <ACPI PCI bus> on pcib4
pci10: domain=0, physical bus=10
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel (ID=29298086) AHCI controller> port
0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem
0xf0904000-0xf09047ff irq 19 at device 31.2 on pci0
atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18e0
atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf0904000
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported
atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC
eSATA 4ports
ata2: <ATA channel 0> on atapci0
ata2: AHCI reset...
ata2: hardware reset ...
ata2: SATA connect time=0ms status=00000123
ata2: ready wait time=7ms
ata2: software reset port 15...
ata2: ready wait time=0ms
ata2: SIGNATURE: 00000101
ata2: AHCI reset done: devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: AHCI reset...
ata3: hardware reset ...
ata3: SATA connect time=10ms status=00000113
ata3: ready wait time=0ms
ata3: software reset port 15...
ata3: ready wait time=0ms
ata3: SIGNATURE: eb140101
ata3: AHCI reset done: devices=00010000
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 4> on atapci0
ata4: AHCI reset...
ata4: hardware reset ...
ata4: SATA connect timeout status=00000004
ata4: AHCI reset done: phy reset found no device
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 5> on atapci0
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect timeout status=00000004
ata5: AHCI reset done: phy reset found no device
ata5: [MPSAFE]
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 56
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0xb9f1aca0 00223 (v1 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0xb9f19620 005B3 (v1 PmRef Cpu0Cst 00003001 INTL 20061109)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT 0xb9f1aa20 001CF (v1 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 0xb9f1af20 0008D (v1 PmRef ApCst 00003000 INTL 20061109)
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ex_isa_identify()
ahc_isa_probe 1: ioport 0x1c00 alloc failed
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xe0000-0xe17ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 251406 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99762019 hz
Timecounter "TSC" frequency 2095002262 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
pflog0: bpf attached
hptrr: no controller detected.
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
acpi_acad0: acline initialization start
battery0: battery initialization start
ad4: 305245MB <WDC WD3200BEVT-22ZCT0 11.01A11> at ata2-master SATA300
ad4: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: Identifying devices: 00010000
ata3: New devices: 00010000
GEOM: ad4: partition 3 does not start on a track boundary.
GEOM: ad4: partition 3 does not end on a track boundary.
GEOM: ad4: partition 2 does not start on a track boundary.
GEOM: ad4: partition 2 does not end on a track boundary.
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ata3: device_reset timeout=380us
acd0: <Optiarc DVD RW AD-7580S/FX04> DVDR drive at ata3 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s)WARNING: ad4s1
expected rawoffset 0, found 63
, 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 50
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 51
WARNING: ad4s1a expected rawoffset 0, found 63
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus2
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus7
uhub7: 8 ports with 8 removable, self powered
Root mount waiting for: usbus7
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): Down reving Protocol Version from 2 to 0?
ugen7.2: <USBest Technology> at usbus7
umass0: <USBest Technology USB Mass Storage Device, class 0/0, rev
2.00/1.00, addr 2> on usbus7
umass0: SCSI over Bulk-Only; quirks = 0x0000
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata1:0:0:0): CAM Status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI Status: Check Condition
(probe0:ata1:0:0:0): NOT READY asc:3a,1
(probe0:ata1:0:0:0): Medium not present - tray closed
(probe0:ata1:0:0:0): (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata1:0:0:0): NOT READY asc:3a,1
(probe0:ata1:0:0:0): Medium not present - tray closed
Unretryable error
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
GEOM: new disk cd0pass0 at ata1 bus 0 target 0 lun 0
pass0: <Optiarc DVD RW AD-7580S FX04> Removable CD-ROM SCSI-0 device
pass0: 3.300MB/s transfers
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7580S FX04> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
umass0:2:0:-1: Attached to scbus2
pass1 at umass-sim0 bus 0 target 0 lun 0
pass1: <WLW essentials 8GB 0.00> Removable Direct Access SCSI-2 device
pass1: 40.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <WLW essentials 8GB 0.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 7701MB (15771759 512 byte sectors: 255H 63S/T 981C)
ugen7.3: <SuYin> at usbus7
Trying to mount root from ufs:/dev/ad4s1a
ct_to_ts([2010-06-10 21:35:32]) = 1276205732.000000000
start_init: trying /sbin/init
battery0: battery initialization done, tried 2 times
--
View this message in context: http://old.nabble.com/Problem-network-devices-Acer-Extensa-5635G-tp28219409p28841924.html
Sent from the freebsd-acpi mailing list archive at Nabble.com.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?28841924.post>