Date: Sat, 19 Sep 1998 18:28:23 +0000 (GMT) From: FreeBSD MAIL <freebsd@mauibuilt.com> To: freebsd-isp@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Please Help with Digiboard Message-ID: <199809191851.SAA09655@mauibuilt.com>
next in thread | raw e-mail | index | archive | help
I am having problems with a Digiboard 16em. I have been searching the mailing lists and found little information about my problem, but it is mentioned and there may have been a fix. This is there error I get on boot. dgb0: PC/Xi 512K dgb0 at 0x224-0x227 maddr 0xfc0000 msize 524288 flags 0x2 on isa dgb0: 2nd reset failed I played with memory size between 8 and 16 megs as I had read that this might be the problem, as well as setting the flags in the kernel (0x01 0x02) to no avail.. I have built all the /dev/cuaD0X enteries as well /as /dev/ttyD0X and added them to /etc/ttys. I have the cable from the Digiboard pluged into EBI/in port on the breakout box and have a modem pluged into port 1. I try and talk to the modem using cu and this is what I get. /root 103% cu -s 9600 -l /dev/cuaD00 cu: open (/dev/cuaD00): Device not configured cu: /dev/cuaD00: Line in use Am I talking to the card in the correct manner? is there some patch to make the Xem cards work.. (ie the 16em). Any help is much apreciated. Thanks in advance Richard Puga puga@mauibuilt.com freebsd@mauibuilt.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199809191851.SAA09655>