Date: Fri, 18 Jun 2004 13:12:19 +0200 From: Patrick Hurrelmann <outi@bytephobia.de> To: freebsd-questions@freebsd.org, freebsd-current@freebsd.org Subject: Problems installing FreeBSD with 3ware 9500S-4LP Message-ID: <20040618131219.75ea8f90@duality.bytephobia.de>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hi,
finally i received my new raid-controller, bu i have problems installing FreeBSD on it :/
I tried different releases and current snapshots...
5.1-Release
w ACPI: Loading twa.ko (binary distribution of 3ware.com for 5.2) in sysinstall failes.
w/o ACPI: same as w ACPI.
5.2-Release
w ACPI: loaded twa.ko in sysinstall.
install went ok, on next reboot it just halts after BTX-Loader.
I cannot load twa.ko in loader.
w/o ACPI: same as w ACPI.
5.2.1-Release
identical to 5.2 Release.
5.2-CURRENT-20040420
w ACPI: install went ok, on next reboot the following message scrolls the screen and it reboots:
"Console internal keyboard/video" (or sth. like that)
w/o ACPI: same as w ACPI.
5.2-CURRENT-20040504
identical to 5.2-CURRENT-20040420
5.2-CURRENT-20040617
identical to 5.2-CURRENT-20040420
I attached a normal and a verbose-dmesg.
As I'm new to BSD i don't know what to do now.
Thanks,
Patrick
--
===========================================================================
Patrick Hurrelmann | "Programming today is a race between software
Mannheim, Germany | engineers striving to build bigger and better
| idiot-proof programs, and the Universe trying
outi at bytephobia.de | to produce bigger and better idiots. So far,
www.bytephobia.de | the Universe is winning." - Rich Cook
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Mon Jun 14 17:08:01 CEST 2004
ouTi-Home@duality.bytephobia.de:/usr/obj/usr/src/sys/DUALITY_DBG
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0acf000.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0acf26c.
Preloaded elf module "/boot/kernel/twa.ko" at 0xc0acf318.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) MP 1800+ (1533.40-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 536788992 (511 MB)
avail memory = 515600384 (491 MB)
ACPI APIC Table: <ASUS A7M266-D>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc085f502 (1000022)
VESA: NVidia
acpi0: <ASUS A7M266-D> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> port 0xe800-0xe803 mem 0xf7800000-0xf7800fff,0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce3> mem 0xef800000-0xef87ffff,0xf0000000-0xf3ffffff,0xed000000-0xedffffff irq 16 at device 5.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 UDMA100 controller> port 0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
3ware device driver for 9000 series storage controllers, version: 2.50.00.000
twa0: <3ware 9000 series Storage Controller> port 0xd400-0xd4ff mem 0xee800000-0xeeffffff,0xec800000-0xec8000ff irq 21 at device 9.0 on pci0
twa0: [GIANT-LOCKED]
twa0: 4 ports, Firmware FE9X 2.02.00.011, BIOS BE9X 2.02.01.037
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcm0: <CMedia CMI8738> port 0xc800-0xc8ff irq 17 at device 4.0 on pci2
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xc400-0xc43f mem 0xeb000000-0xeb01ffff,0xeb800000-0xeb800fff irq 18 at device 5.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:4c:14:4b
fxp0: [GIANT-LOCKED]
ohci0: <NEC uPD 9210 USB controller> mem 0xea800000-0xea800fff irq 19 at device 8.0 on pci2
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
ohci1: <NEC uPD 9210 USB controller> mem 0xea000000-0xea000fff irq 16 at device 8.1 on pci2
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Iiyama product 0x0201, class 9/0, rev 1.10/1.10, addr 2
uhub2: 4 ports with 4 removable, self powered
pci2: <serial bus, USB> at device 8.2 (no driver attached)
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x678-0x67f,0x278-0x27f irq 5 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xd8000-0xd97ff,0xcc000-0xd7fff,0xc0000-0xcb7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acd0: CDRW <PLEXTOR CD-R PX-W4012A> at ata0-master UDMA33
acd1: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-117 0107> at ata0-slave UDMA66
ad2: 19470MB <IBM-DJNA-352030> [39560/16/63] at ata1-master UDMA66
da0 at twa0 bus 0 target 0 lun 0
da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device
da0: 100.000MB/s transfers
da0: 343290MB (703057920 512 byte sectors: 255H 63S/T 43763C)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R PX-W4012A 1.05> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [335411 x 2048 byte records]
SMP: AP CPU #1 Launched!
cd1 at ata0 bus 0 target 1 lun 0
cd1: <PIONEER DVD-ROM DVD-117 1.07> Removable CD-ROM SCSI-0 device
cd1: 66.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad2s1a
[-- Attachment #3 --]
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0017, statreg=0x2220, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
agp0: <AMD 762 host to AGP bridge> port 0xe800-0xe803 mem 0xf7800000-0xf7800fff,0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xf7800000
agp0: allocating GATT for aperture of size 64M
agp0: gatt -> ag_pdir 0x234000
agp0: allocating GATT for 16384 AGP page entries
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xed000000-0xee5fffff
pcib1: prefetched decode 0xef700000-0xf77fffff
ACPI PCI link initial configuration:
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base ed000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xed000000-0xedffffff
map[14]: type 3, range 32, base f0000000, size 26, enabled
pcib1: device (null) requested decoded memory range 0xf0000000-0xf3ffffff
map[18]: type 3, range 32, base ef800000, size 19, enabled
pcib1: device (null) requested decoded memory range 0xef800000-0xef87ffff
pcib1: matched entry for 1.5.INTA (src )
pcib1: device is hardwired to IRQ 16
found-> vendor=0x10de, dev=0x0200, revid=0xa3
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
nvidia0: <GeForce3> mem 0xef800000-0xef87ffff,0xf0000000-0xf3ffffff,0xed000000-0xedffffff irq 16 at device 5.0 on pci1
nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xed000000
nvidia0: Reserved 0x4000000 bytes for rid 0x14 type 3 at 0xf0000000
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 UDMA100 controller> port 0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd800
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
3ware device driver for 9000 series storage controllers, version: 2.50.00.000
twa0: <3ware 9000 series Storage Controller> port 0xd400-0xd4ff mem 0xee800000-0xeeffffff,0xec800000-0xec8000ff irq 21 at device 9.0 on pci0
twa0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd400
twa0: [GIANT-LOCKED]
twa0: 4 ports, Firmware FE9X 2.02.00.011, BIOS BE9X 2.02.01.037
twa0: Monitor BL9X 2.02.00.001, PCB Rev 017 , Achip 3.20 , Pchip 1.40
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xe9800000-0xec7fffff
pcib2: prefetched decode 0xee600000-0xee6fffff
ACPI PCI link initial configuration:
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 0000c800, size 8, enabled
pcib2: device (null) requested decoded I/O range 0xc800-0xc8ff
pcib2: matched entry for 2.4.INTA (src )
pcib2: device is hardwired to IRQ 17
found-> vendor=0x13f6, dev=0x0111, revid=0x10
bus=2, slot=4, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0085, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=17
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base eb800000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xeb800000-0xeb800fff
map[14]: type 4, range 32, base 0000c400, size 6, enabled
pcib2: device (null) requested decoded I/O range 0xc400-0xc43f
map[18]: type 1, range 32, base eb000000, size 17, enabled
pcib2: device (null) requested decoded memory range 0xeb000000-0xeb01ffff
pcib2: matched entry for 2.5.INTA (src )
pcib2: device is hardwired to IRQ 18
found-> vendor=0x8086, dev=0x1229, revid=0x0c
bus=2, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=18
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ea800000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xea800000-0xea800fff
pcib2: matched entry for 2.8.INTA (src )
pcib2: device is hardwired to IRQ 19
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=2, slot=8, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=19
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ea000000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xea000000-0xea000fff
pcib2: matched entry for 2.8.INTB (src )
pcib2: device is hardwired to IRQ 16
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=2, slot=8, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e9800000, size 8, enabled
pcib2: device (null) requested decoded memory range 0xe9800000-0xe98000ff
pcib2: matched entry for 2.8.INTC (src )
pcib2: device is hardwired to IRQ 17
found-> vendor=0x1033, dev=0x00e0, revid=0x02
bus=2, slot=8, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=17
powerspec 2 supports D0 D1 D2 D3 current D0
pcm0: <CMedia CMI8738> port 0xc800-0xc8ff irq 17 at device 4.0 on pci2
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc800
pcm0: [MPSAFE]
pcm0: sndbuf_setmap 237000, 4000; 0xd9536000 -> 237000
pcm0: sndbuf_setmap 256000, 4000; 0xd953a000 -> 256000
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xc400-0xc43f mem 0xeb000000-0xeb01ffff,0xeb800000-0xeb800fff irq 18 at device 5.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xeb800000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 0040 000c
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:02:b3:4c:14:4b
fxp0: [GIANT-LOCKED]
ohci0: <NEC uPD 9210 USB controller> mem 0xea800000-0xea800fff irq 19 at device 8.0 on pci2
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xea800000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
ohci1: <NEC uPD 9210 USB controller> mem 0xea000000-0xea000fff irq 16 at device 8.1 on pci2
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xea000000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Iiyama product 0x0201, class 9/0, rev 1.10/1.10, addr 2
uhub2: 4 ports with 4 removable, self powered
pci2: <serial bus, USB> at device 8.2 (no driver attached)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x678-0x67f,0x278-0x27f irq 5 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0xc061 0xc071 0xc061 0xc061
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0xc061 0xc069 0xc061 0xc061
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xd8000-0xd97ff,0xcc000-0xd7fff,0xc0000-0xcb7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
linprocfs registered
procfs registered
Timecounter "TSC" frequency 1533393728 Hz quality -100
Timecounters tick every 10.000 msec
pfsync0: bpf attached
pflog0: bpf attached
Linux ELF exec handler installed
IPsec: Initialized Security Association Processing.
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on AMD 768 chip
ata0-master: setting UDMA33 on AMD 768 chip
ata0-slave: setting PIO4 on AMD 768 chip
ata0-slave: setting UDMA66 on AMD 768 chip
acd0: <PLEXTOR CD-R PX-W4012A/1.05> CDRW drive at ata0 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 4096KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
acd1: <Pioneer DVD-ROM ATAPIModel DVD-117 0107/E1.07> DVDROM drive at ata0 as slave
acd1: read 6894KB/s (6894KB/s), 256KB buffer, UDMA66
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd1: Writes:
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ata1-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata1-master: setting PIO4 on AMD 768 chip
ata1-master: setting UDMA66 on AMD 768 chip
ad2: <IBM-DJNA-352030/J58OA30K> ATA-4 disk at ata1-master
ad2: 19470MB (39876480 sectors), 39560 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad2
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:39876417
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 20416725504 end 20416757759
GEOM: Configure ad2s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad2s1b, start 268435456 length 1342177280 end 1610612735
GEOM: Configure ad2s1c, start 0 length 20416725504 end 20416725503
GEOM: Configure ad2s1d, start 1610612736 length 1073741824 end 2684354559
GEOM: Configure ad2s1e, start 2684354560 length 17732370944 end 20416725503
(probe1:twa0:0:1:0): CAM Status 0x3d
(probe1:twa0:0:1:0): Retrying Command
(probe2:twa0:0:2:0): CAM Status 0x3d
(probe2:twa0:0:2:0): Retrying Command
(probe3:twa0:0:3:0): CAM Status 0x3d
(probe3:twa0:0:3:0): Retrying Command
(probe15:twa0:0:16:0): CAM Status 0x39
(probe15:twa0:0:16:0): Retrying Command
(probe15:twa0:0:16:0): CAM Status 0x39
(probe15:twa0:0:16:0): Retrying Command
(probe15:twa0:0:16:0): CAM Status 0x39
(probe15:twa0:0:16:0): Retrying Command
(probe15:twa0:0:16:0): CAM Status 0x39
(probe15:twa0:0:16:0): Retrying Command
(probe15:twa0:0:16:0): error 5
(probe15:twa0:0:16:0): Retries Exhausted
(probe15:twa0:0:16:0): CAM Status 0x39
(probe15:twa0:0:16:0): Retrying Command
(probe15:twa0:0:16:0): CAM Status 0x39
(probe15:twa0:0:16:0): Retrying Command
(probe15:twa0:0:16:0): CAM Status 0x39
(probe15:twa0:0:16:0): Retrying Command
(probe15:twa0:0:16:0): CAM Status 0x39
(probe15:twa0:0:16:0): Retrying Command
(probe15:twa0:0:16:0): error 5
(probe15:twa0:0:16:0): Retries Exhausted
(probe4:twa0:0:4:0): CAM Status 0x3d
(probe4:twa0:0:4:0): Retrying Command
(probe5:twa0:0:5:0): CAM Status 0x3d
(probe5:twa0:0:5:0): Retrying Command
(probe6:twa0:0:6:0): CAM Status 0x3d
(probe6:twa0:0:6:0): Retrying Command
(probe7:twa0:0:7:0): CAM Status 0x3d
(probe7:twa0:0:7:0): Retrying Command
(probe8:twa0:0:8:0): CAM Status 0x3d
(probe8:twa0:0:8:0): Retrying Command
(probe9:twa0:0:9:0): CAM Status 0x3d
(probe9:twa0:0:9:0): Retrying Command
(probe10:twa0:0:10:0): CAM Status 0x3d
(probe10:twa0:0:10:0): Retrying Command
(probe11:twa0:0:11:0): CAM Status 0x3d
(probe11:twa0:0:11:0): Retrying Command
(probe12:twa0:0:13:0): CAM Status 0x3d
(probe12:twa0:0:13:0): Retrying Command
(probe13:twa0:0:14:0): CAM Status 0x3d
(probe13:twa0:0:14:0): Retrying Command
(probe14:twa0:0:15:0): CAM Status 0x3d
(probe14:twa0:0:15:0): Retrying Command
(probe0:twa0:0:0:0): error 22
(probe0:twa0:0:0:0): Unretryable Error
(probe1:twa0:0:1:0): CAM Status 0x3d
(probe1:twa0:0:1:0): Retrying Command
(probe2:twa0:0:2:0): CAM Status 0x3d
(probe2:twa0:0:2:0): Retrying Command
(probe3:twa0:0:3:0): CAM Status 0x3d
(probe3:twa0:0:3:0): Retrying Command
(probe18:ata1:0:0:0): error 22
(probe18:ata1:0:0:0): Unretryable Error
(probe19:ata1:0:1:0): error 22
(probe19:ata1:0:1:0): Unretryable Error
(probe18:ata1:0:0:0): error 22
(probe18:ata1:0:0:0): Unretryable Error
(probe19:ata1:0:1:0): error 22
(probe19:ata1:0:1:0): Unretryable Error
(probe4:twa0:0:4:0): CAM Status 0x3d
(probe4:twa0:0:4:0): Retrying Command
(probe5:twa0:0:5:0): CAM Status 0x3d
(probe5:twa0:0:5:0): Retrying Command
(probe6:twa0:0:6:0): CAM Status 0x3d
(probe6:twa0:0:6:0): Retrying Command
(probe7:twa0:0:7:0): CAM Status 0x3d
(probe7:twa0:0:7:0): Retrying Command
(probe8:twa0:0:8:0): CAM Status 0x3d
(probe8:twa0:0:8:0): Retrying Command
(probe9:twa0:0:9:0): CAM Status 0x3d
(probe9:twa0:0:9:0): Retrying Command
(probe10:twa0:0:10:0): CAM Status 0x3d
(probe10:twa0:0:10:0): Retrying Command
(probe11:twa0:0:11:0): CAM Status 0x3d
(probe11:twa0:0:11:0): Retrying Command
(probe12:twa0:0:13:0): CAM Status 0x3d
(probe12:twa0:0:13:0): Retrying Command
(probe13:twa0:0:14:0): CAM Status 0x3d
(probe13:twa0:0:14:0): Retrying Command
(probe14:twa0:0:15:0): CAM Status 0x3d
(probe14:twa0:0:15:0): Retrying Command
(probe1:twa0:0:1:0): CAM Status 0x3d
(probe1:twa0:0:1:0): Retrying Command
(probe2:twa0:0:2:0): CAM Status 0x3d
(probe2:twa0:0:2:0): Retrying Command
(probe3:twa0:0:3:0): CAM Status 0x3d
(probe3:twa0:0:3:0): Retrying Command
(probe4:twa0:0:4:0): CAM Status 0x3d
(probe4:twa0:0:4:0): Retrying Command
(probe5:twa0:0:5:0): CAM Status 0x3d
(probe5:twa0:0:5:0): Retrying Command
(probe6:twa0:0:6:0): CAM Status 0x3d
(probe6:twa0:0:6:0): Retrying Command
(probe7:twa0:0:7:0): CAM Status 0x3d
(probe7:twa0:0:7:0): Retrying Command
(probe8:twa0:0:8:0): CAM Status 0x3d
(probe8:twa0:0:8:0): Retrying Command
(probe9:twa0:0:9:0): CAM Status 0x3d
(probe9:twa0:0:9:0): Retrying Command
(probe10:twa0:0:10:0): CAM Status 0x3d
(probe10:twa0:0:10:0): Retrying Command
(probe11:twa0:0:11:0): CAM Status 0x3d
(probe11:twa0:0:11:0): Retrying Command
(probe16:ata0:0:0:0): error 22
(probe16:ata0:0:0:0): Unretryable Error
(probe12:twa0:0:13:0): CAM Status 0x3d
(probe12:twa0:0:13:0): Retrying Command
(probe13:twa0:0:14:0): CAM Status 0x3d
(probe13:twa0:0:14:0): Retrying Command
(probe17:ata0:0:1:0): error 22
(probe17:ata0:0:1:0): Unretryable Error
(probe14:twa0:0:15:0): CAM Status 0x3d
(probe14:twa0:0:15:0): Retrying Command
(probe1:twa0:0:1:0): CAM Status 0x3d
(probe1:twa0:0:1:0): Retrying Command
(probe2:twa0:0:2:0): CAM Status 0x3d
(probe2:twa0:0:2:0): Retrying Command
(probe17:ata0:0:1:0): error 6
(probe17:ata0:0:1:0): Unretryable Error
(probe3:twa0:0:3:0): CAM Status 0x3d
(probe3:twa0:0:3:0): Retrying Command
(probe4:twa0:0:4:0): CAM Status 0x3d
(probe4:twa0:0:4:0): Retrying Command
(probe5:twa0:0:5:0): CAM Status 0x3d
(probe5:twa0:0:5:0): Retrying Command
(probe16:ata0:0:0:0): error 22
(probe16:ata0:0:0:0): Unretryable Error
(probe6:twa0:0:6:0): CAM Status 0x3d
(probe6:twa0:0:6:0): Retrying Command
(probe17:ata0:0:1:0): error 22
(probe17:ata0:0:1:0): Unretryable Error
(probe7:twa0:0:7:0): CAM Status 0x3d
(probe7:twa0:0:7:0): Retrying Command
(probe8:twa0:0:8:0): CAM Status 0x3d
(probe8:twa0:0:8:0): Retrying Command
(probe9:twa0:0:9:0): CAM Status 0x3d
(probe9:twa0:0:9:0): Retrying Command
(probe10:twa0:0:10:0): CAM Status 0x3d
(probe10:twa0:0:10:0): Retrying Command
(probe11:twa0:0:11:0): CAM Status 0x3d
(probe11:twa0:0:11:0): Retrying Command
(probe12:twa0:0:13:0): CAM Status 0x3d
(probe12:twa0:0:13:0): Retrying Command
(probe13:twa0:0:14:0): CAM Status 0x3d
(probe13:twa0:0:14:0): Retrying Command
(probe14:twa0:0:15:0): CAM Status 0x3d
(probe14:twa0:0:15:0): Retrying Command
(probe1:twa0:0:1:0): error 5
(probe1:twa0:0:1:0): Retries Exhausted
(probe2:twa0:0:2:0): error 5
(probe2:twa0:0:2:0): Retries Exhausted
(probe3:twa0:0:3:0): error 5
(probe3:twa0:0:3:0): Retries Exhausted
(probe4:twa0:0:4:0): error 5
(probe4:twa0:0:4:0): Retries Exhausted
(probe5:twa0:0:5:0): error 5
(probe5:twa0:0:5:0): Retries Exhausted
(probe6:twa0:0:6:0): error 5
(probe6:twa0:0:6:0): Retries Exhausted
(probe7:twa0:0:7:0): error 5
(probe7:twa0:0:7:0): Retries Exhausted
(probe8:twa0:0:8:0): error 5
(probe8:twa0:0:8:0): Retries Exhausted
(probe9:twa0:0:9:0): error 5
(probe9:twa0:0:9:0): Retries Exhausted
(probe10:twa0:0:10:0): error 5
(probe10:twa0:0:10:0): Retries Exhausted
(probe11:twa0:0:11:0): error 5
(probe11:twa0:0:11:0): Retries Exhausted
(probe12:twa0:0:13:0): error 5
(probe12:twa0:0:13:0): Retries Exhausted
(probe13:twa0:0:14:0): error 5
(probe13:twa0:0:14:0): Retries Exhausted
(probe14:twa0:0:15:0): error 5
(probe14:twa0:0:15:0): Retries Exhausted
(probe1:twa0:0:1:0): CAM Status 0x3d
(probe1:twa0:0:1:0): Retrying Command
(probe2:twa0:0:2:0): CAM Status 0x3d
(probe2:twa0:0:2:0): Retrying Command
(probe3:twa0:0:3:0): CAM Status 0x3d
(probe3:twa0:0:3:0): Retrying Command
(probe4:twa0:0:4:0): CAM Status 0x3d
(probe4:twa0:0:4:0): Retrying Command
(probe5:twa0:0:5:0): CAM Status 0x3d
(probe5:twa0:0:5:0): Retrying Command
(probe6:twa0:0:6:0): CAM Status 0x3d
(probe6:twa0:0:6:0): Retrying Command
(probe7:twa0:0:7:0): CAM Status 0x3d
(probe7:twa0:0:7:0): Retrying Command
(probe8:twa0:0:8:0): CAM Status 0x3d
(probe8:twa0:0:8:0): Retrying Command
(probe9:twa0:0:9:0): CAM Status 0x3d
(probe9:twa0:0:9:0): Retrying Command
(probe10:twa0:0:10:0): CAM Status 0x3d
(probe10:twa0:0:10:0): Retrying Command
(probe11:twa0:0:11:0): CAM Status 0x3d
(probe11:twa0:0:11:0): Retrying Command
(probe12:twa0:0:13:0): CAM Status 0x3d
(probe12:twa0:0:13:0): Retrying Command
(probe13:twa0:0:14:0): CAM Status 0x3d
(probe13:twa0:0:14:0): Retrying Command
(probe14:twa0:0:15:0): CAM Status 0x3d
(probe14:twa0:0:15:0): Retrying Command
(probe0:twa0:0:0:0): error 22
(probe0:twa0:0:0:0): Unretryable Error
(probe1:twa0:0:1:0): CAM Status 0x3d
(probe1:twa0:0:1:0): Retrying Command
(probe2:twa0:0:2:0): CAM Status 0x3d
(probe2:twa0:0:2:0): Retrying Command
(probe3:twa0:0:3:0): CAM Status 0x3d
(probe3:twa0:0:3:0): Retrying Command
(probe4:twa0:0:4:0): CAM Status 0x3d
(probe4:twa0:0:4:0): Retrying Command
(probe5:twa0:0:5:0): CAM Status 0x3d
(probe5:twa0:0:5:0): Retrying Command
(probe6:twa0:0:6:0): CAM Status 0x3d
(probe6:twa0:0:6:0): Retrying Command
(probe7:twa0:0:7:0): CAM Status 0x3d
(probe7:twa0:0:7:0): Retrying Command
(probe8:twa0:0:8:0): CAM Status 0x3d
(probe8:twa0:0:8:0): Retrying Command
(probe9:twa0:0:9:0): CAM Status 0x3d
(probe9:twa0:0:9:0): Retrying Command
(probe10:twa0:0:10:0): CAM Status 0x3d
(probe10:twa0:0:10:0): Retrying Command
(probe11:twa0:0:11:0): CAM Status 0x3d
(probe11:twa0:0:11:0): Retrying Command
(probe12:twa0:0:13:0): CAM Status 0x3d
(probe12:twa0:0:13:0): Retrying Command
(probe13:twa0:0:14:0): CAM Status 0x3d
(probe13:twa0:0:14:0): Retrying Command
(probe14:twa0:0:15:0): CAM Status 0x3d
(probe14:twa0:0:15:0): Retrying Command
(probe1:twa0:0:1:0): CAM Status 0x3d
(probe1:twa0:0:1:0): Retrying Command
(probe2:twa0:0:2:0): CAM Status 0x3d
(probe2:twa0:0:2:0): Retrying Command
(probe3:twa0:0:3:0): CAM Status 0x3d
(probe3:twa0:0:3:0): Retrying Command
(probe4:twa0:0:4:0): CAM Status 0x3d
(probe4:twa0:0:4:0): Retrying Command
(probe5:twa0:0:5:0): CAM Status 0x3d
(probe5:twa0:0:5:0): Retrying Command
(probe6:twa0:0:6:0): CAM Status 0x3d
(probe6:twa0:0:6:0): Retrying Command
(probe7:twa0:0:7:0): CAM Status 0x3d
(probe7:twa0:0:7:0): Retrying Command
(probe8:twa0:0:8:0): CAM Status 0x3d
(probe8:twa0:0:8:0): Retrying Command
(probe9:twa0:0:9:0): CAM Status 0x3d
(probe9:twa0:0:9:0): Retrying Command
(probe10:twa0:0:10:0): CAM Status 0x3d
(probe10:twa0:0:10:0): Retrying Command
(probe11:twa0:0:11:0): CAM Status 0x3d
(probe11:twa0:0:11:0): Retrying Command
(probe12:twa0:0:13:0): CAM Status 0x3d
(probe12:twa0:0:13:0): Retrying Command
(probe13:twa0:0:14:0): CAM Status 0x3d
(probe13:twa0:0:14:0): Retrying Command
(probe14:twa0:0:15:0): CAM Status 0x3d
(probe14:twa0:0:15:0): Retrying Command
(probe1:twa0:0:1:0): CAM Status 0x3d
(probe1:twa0:0:1:0): Retrying Command
(probe2:twa0:0:2:0): CAM Status 0x3d
(probe2:twa0:0:2:0): Retrying Command
(probe3:twa0:0:3:0): CAM Status 0x3d
(probe3:twa0:0:3:0): Retrying Command
(probe4:twa0:0:4:0): CAM Status 0x3d
(probe4:twa0:0:4:0): Retrying Command
(probe5:twa0:0:5:0): CAM Status 0x3d
(probe5:twa0:0:5:0): Retrying Command
(probe6:twa0:0:6:0): CAM Status 0x3d
(probe6:twa0:0:6:0): Retrying Command
(probe7:twa0:0:7:0): CAM Status 0x3d
(probe7:twa0:0:7:0): Retrying Command
(probe8:twa0:0:8:0): CAM Status 0x3d
(probe8:twa0:0:8:0): Retrying Command
(probe9:twa0:0:9:0): CAM Status 0x3d
(probe9:twa0:0:9:0): Retrying Command
(probe10:twa0:0:10:0): CAM Status 0x3d
(probe10:twa0:0:10:0): Retrying Command
(probe11:twa0:0:11:0): CAM Status 0x3d
(probe11:twa0:0:11:0): Retrying Command
(probe12:twa0:0:13:0): CAM Status 0x3d
(probe12:twa0:0:13:0): Retrying Command
(probe13:twa0:0:14:0): CAM Status 0x3d
(probe13:twa0:0:14:0): Retrying Command
(probe14:twa0:0:15:0): CAM Status 0x3d
(probe14:twa0:0:15:0): Retrying Command
(probe1:twa0:0:1:0): error 5
(probe1:twa0:0:1:0): Retries Exhausted
(probe2:twa0:0:2:0): error 5
(probe2:twa0:0:2:0): Retries Exhausted
(probe3:twa0:0:3:0): error 5
(probe3:twa0:0:3:0): Retries Exhausted
(probe4:twa0:0:4:0): error 5
(probe4:twa0:0:4:0): Retries Exhausted
(probe5:twa0:0:5:0): error 5
(probe5:twa0:0:5:0): Retries Exhausted
(probe6:twa0:0:6:0): error 5
(probe6:twa0:0:6:0): Retries Exhausted
(probe7:twa0:0:7:0): error 5
(probe7:twa0:0:7:0): Retries Exhausted
(probe8:twa0:0:8:0): error 5
(probe8:twa0:0:8:0): Retries Exhausted
(probe9:twa0:0:9:0): error 5
(probe9:twa0:0:9:0): Retries Exhausted
(probe10:twa0:0:10:0): error 5
(probe10:twa0:0:10:0): Retries Exhausted
(probe11:twa0:0:11:0): error 5
(probe11:twa0:0:11:0): Retries Exhausted
(probe12:twa0:0:13:0): error 5
(probe12:twa0:0:13:0): Retries Exhausted
(probe13:twa0:0:14:0): error 5
(probe13:twa0:0:14:0): Retries Exhausted
(probe14:twa0:0:15:0): error 5
(probe14:twa0:0:15:0): Retries Exhausted
pass0 at twa0 bus 0 target 0 lun 0
pass0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device
pass0: 100.000MB/s transfers
pass1 at ata0 bus 0 target 0 lun 0
pass1: <PLEXTOR CD-R PX-W4012A 1.05> Removable CD-ROM SCSI-0 device
pass1: 33.000MB/s transfers
pass2 at ata0 bus 0 target 1 lun 0
pass2: <PIONEER DVD-ROM DVD-117 1.07> Removable CD-ROM SCSI-0 device
pass2: 66.000MB/s transfers
da0 at twa0 bus 0 target 0 lun 0
da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device
da0: 100.000MB/s transfers
da0: 343290MB (703057920 512 byte sectors: 255H 63S/T 43763C)
GEOM: new disk cd0
GEOM: new disk cd1
GEOM: new disk da0
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R PX-W4012A 1.05> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [335411 x 2048 byte records]
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 3 (IRQ 3) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 0
ioapic0: routing intpin 5 (IRQ 5) to cluster 0
ioapic0: routing intpin 6 (IRQ 6) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 9 (IRQ 9) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 0
ioapic0: routing intpin 14 (IRQ 14) to cluster 0
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
ioapic0: routing intpin 16 (IRQ 16) to cluster 0
ioapic0: routing intpin 17 (IRQ 17) to cluster 0
ioapic0: routing intpin 18 (IRQ 18) to cluster 0
ioapic0: routing intpin 19 (IRQ 19) to cluster 0
ioapic0: routing intpin 21 (IRQ 21) to cluster 0
(cd1:ata0:0:1:0): error 6
(cd1:ata0:0:1:0): Unretryable Error
cd1 at ata0 bus 0 target 1 lun 0
cd1: <PIONEER DVD-ROM DVD-117 1.07> Removable CD-ROM SCSI-0 device
cd1: 66.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
(cd1:ata0:0:1:0): error 6
(cd1:ata0:0:1:0): Unretryable Error
(cd1:ata0:0:1:0): error 6
(cd1:ata0:0:1:0): Unretryable Error
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:614389797
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 314567576064 end 314567608319
GEOM: Configure da0s1a, start 0 length 536870912 end 536870911
GEOM: Configure da0s1b, start 536870912 length 2147483648 end 2684354559
GEOM: Configure da0s1c, start 0 length 314567576064 end 314567576063
GEOM: Configure da0s1d, start 2684354560 length 2147483648 end 4831838207
GEOM: Configure da0s1e, start 4831838208 length 2147483648 end 6979321855
GEOM: Configure da0s1f, start 6979321856 length 21474836480 end 28454158335
GEOM: Configure da0s1g, start 28454158336 length 286113417728 end 314567576063
Mounting root from ufs:/dev/ad2s1a
start_init: trying /sbin/init
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040618131219.75ea8f90>