Date: Wed, 3 Sep 1997 10:16:22 +1000 (EST) From: Ian Wood <wood@elec.uq.edu.au> To: freebsd-mobile@FreeBSD.ORG Subject: Stuck installing PAO on Acernote Light Message-ID: <199709030016.KAA09775@axon.elec.uq.edu.au>
next in thread | raw e-mail | index | archive | help
Hi,
we are having trouble getting the PAO package to work with
our Acernote Light P100. Current status:
FreeBSD: 2.2.2 RELEASE#0
Installed PAO-970616 by hand, following the 10 steps in the README.
Both the kernel and pccardd detect cards being inserted,
removed from both slots, with slightly different results (output at
end of this message).
We are unable to get the CIS data from our cards, and hence our
/etc/pccard.conf is ignored, regardless of it's correctness (?).
We wish to get 2 cards working - an SMC EtherEZ 8020BT ethernet card
and a Netcomm (Australian) modem card.
Current kernel messages (via dmesg):
(I cut out some irrelevant bits)
We notice that we do not seem to have eg: "pccard driver ed added"
which Yong Liu reports.
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.2-RELEASE #0: Wed Aug 13 21:58:50 EST 1997
root@wing-yee.Makefile.ORG:/usr/src/sys/compile/NERVE
Calibrating clock(s) ... i586 clock: 100230399 Hz, i8254 clock: 1193221 Hz
CPU: Pentium (100.23-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x570 Stepping=0
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 16777216 (16384K bytes)
avail memory = 14716928 (14372K bytes)
Initializing PC-card drivers: ed ep fe sn wlp sio wdc
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x00000000
pcibus_setup(1a): mode1res=0x00000001 (0x80000000)
pcibus_check: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found
pcibus_setup(1b): mode1res=0x80000000 (0xff000001)
pcibus_check: device 0 is there (id=151110b9)
Probing for devices on PCI bus 0:
configuration mode 1 allows 32 devices.
chip0 <generic PCI bridge (vendor=10b9 device=1511 subclass=0)> rev 4 on pci0:0
chip1 <generic PCI bridge (vendor=10b9 device=1513 subclass=1)> rev 164 on pci0:2
vga0 <VGA-compatible display device> rev 0 on pci0:6
pci0:8: ACER Labs, device=0x5215, class=storage (ide) [no driver assigned]
map(10): io(01f0)
map(14): io(03f4)
pci0: uses 8388608 bytes of memory from fe000000 upto fe7fffff.
pci0: uses 1024 bytes of I/O space from fc00 upto ffff.
Probing for devices on the ISA bus:
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1 not found at 0x300
fe0 not found at 0x300
fe1 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 not found at 0x2f8
sio2 not found at 0x3e8
lpt0 at 0x3bc-0x3c3 irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0: current command byte:0065
psm0: status after reset 00 02 64
psm: status 00 00 64 (get_mouse_buttons)
psm0: status 00 02 64
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: device ID 0, 2 buttons
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <HITACHI_DK223A-81>
wd0: 775MB (1587600 sectors), 1575 cyls, 16 heads, 63 S/T, 512 B/S
ep0 not found at 0x300
ep1 not found at 0x300
sn0 not found at 0x300
sn1 not found at 0x300
wlp0 not found at 0x300
wlp0: disabled, not probed.
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
imasks: bio c0004040, tty c0031092, net c0020000
PC-Card Cirrus Logic PD672X (5 mem & 2 I/O windows)
pcic: controller irq 3
Device configuration finished.
configure() finished.
Card inserted, slot 0
Results of inserting & removing the 2 cards in slots 0 & 1:
Slot 0:
(Netcomm 33.6 Modem Card inserted: )
Sep 3 10:58:35 nerve /kernel: Card inserted, slot 0
Sep 3 10:58:35 nerve /kernel: Card inserted, slot 0
Sep 3 10:58:38 nerve pccardd[234]: No card in database for "(null)"("(null)")
Sep 3 10:58:38 nerve pccardd[234]: No card in database for "(null)"("(null)")
# pccardc dumpcis
Configuration data for card in slot 0
Tuple #1, code = 0xff (Terminator), length = 0
2 slots found
(Netcomm 33.6 Modem Card removed: )
# Sep 3 10:59:37 nerve /kernel: Card removed, slot 0
Sep 3 10:59:37 nerve /kernel: Card removed, slot 0
(SMC Ether EZ Ethernet card inserted: )
Sep 3 10:59:48 nerve /kernel: Card inserted, slot 0
Sep 3 10:59:48 nerve /kernel: Card inserted, slot 0
Sep 3 10:59:51 nerve pccardd[33]: No card in database for "(null)"("(null)")
Sep 3 10:59:51 nerve pccardd[33]: No card in database for "(null)"("(null)")
# pccardc dumpcis
Configuration data for card in slot 0
Tuple #1, code = 0xff (Terminator), length = 0
2 slots found
Slot 1:
(Netcomm 33.6 Modem Card inserted: )
Sep 3 10:51:15 nerve /kernel: Card inserted, slot 1
Sep 3 10:51:15 nerve /kernel: Card inserted, slot 1
Sep 3 10:51:19 nerve pccardd[234]: No card in database for "(null)"("(null)")
Sep 3 10:51:19 nerve pccardd[234]: No card in database for "(null)"("(null)")
# pccardc dumpcis
Configuration data for card in slot 1
2 slots found
(Netcomm 33.6 Modem Card removed: )
# Sep 3 10:52:51 nerve /kernel: Card removed, slot 1
Sep 3 10:52:51 nerve /kernel: Card removed, slot 1
(SMC Ether EZ Ethernet card inserted: )
Sep 3 10:53:00 nerve /kernel: Card inserted, slot 1
Sep 3 10:53:00 nerve /kernel: Card inserted, slot 1
Sep 3 10:53:04 nerve pccardd[33]: No card in database for "(null)"("(null)")
Sep 3 10:53:04 nerve pccardd[33]: No card in database for "(null)"("(null)")
# pccardc dumpcis
Code 51 not found
Code 51 not found
code Unknown ignored
(this gets repeated 20 times, followed by: )
Configuration data for card in slot 1
Tuple #1, code = 0x0 (Null tuple), length = 51
000: 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33
010: 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33
020: 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33
030: 33 33 33
(also repeated for Tuple #2,...,#20)
2 slots found
any suggestions ?
thanks,
Ian Wood.
wood@elec.uq.edu.au
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199709030016.KAA09775>