Date: Thu, 4 Sep 2014 11:54:14 -0700 From: John-Mark Gurney <jmg@funkthat.com> To: Don Lewis <truckman@FreeBSD.org> Cc: svn-src-head@FreeBSD.org, svn-src-all@FreeBSD.org, src-committers@FreeBSD.org, jhb@FreeBSD.org Subject: Re: svn commit: r271076 - in head/sys: amd64/amd64 amd64/include i386/i386 i386/include pc98/pc98 Message-ID: <20140904185414.GL82175@funkthat.com> In-Reply-To: <201409041741.s84HfTZd093999@gw.catspoiler.org> References: <20140904171946.GG82175@funkthat.com> <201409041741.s84HfTZd093999@gw.catspoiler.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--tjCHc7DPkfUGtrlw Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Don Lewis wrote this message on Thu, Sep 04, 2014 at 10:41 -0700: > On 4 Sep, John-Mark Gurney wrote: > > Don Lewis wrote this message on Thu, Sep 04, 2014 at 09:22 -0700: > >> On 4 Sep, John Baldwin wrote: > >> > On Wednesday, September 03, 2014 07:37:21 PM Don Lewis wrote: > >> >> On 4 Sep, John Baldwin wrote: > >> >> > Author: jhb > >> >> > Date: Thu Sep 4 01:46:06 2014 > >> >> > New Revision: 271076 > >> >> > URL: http://svnweb.freebsd.org/changeset/base/271076 > >> >> > > >> >> > Log: > >> >> > - Move the declaration of has_f00f_hack out of identcpu.c to machdep.c. > >> >> > >> >> That certainly brings back memories ... > >> > > >> > Hopefully not too traumatic. :-P > >> > >> Not really. I remember the general sense of panic when the > >> vulnerability was announced and then the sense of relief when the > >> workaround was found. After that, I got lots of reminders because > >> of the boot message. > >> > >> I've still got the old hardware and am often tempted to see if it will > >> run a recent version of FreeBSD. I don't think I want to know how long > >> it would take to run buildworld post-clang. > > > > Almost as old: > > FreeBSD 11.0-CURRENT #0 r266964:267061M: Wed Jun 11 15:35:27 PDT 2014 > > jmg@carbon.funkthat.com:/usr/obj/i386.i386/usr/src/sys/serbox i386 > > FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 > > CPU: AMD-K6tm w/ multimedia extensions (200.46-MHz 586-class CPU) > > Origin="AuthenticAMD" Id=0x562 Family=0x5 Model=0x6 Stepping=2 > > Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> > > AMD Features=0x400<<b10>> > > > > Works great... :) > > > > Though I'll admit I didn't buildworld on this, but another newer > > machine and then dd'd an image onto a CF card.. > > How much RAM? I think my boards are using 16 MB DIMMs. Some have two > and some have four. It's even ECC RAM. I suspect that ZFS is out of > the question, though ... It has 128MB... I think I have sticks that I could up it 256MB iirc, but for it's needs (serial terminal server), it doesn't need that much ram... I've attached /var/run/dmesg.boot... The other nice thing is that USB finally works on this thing.. :) -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not." --tjCHc7DPkfUGtrlw Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #0 r266964:267061M: Wed Jun 11 15:35:27 PDT 2014 jmg@carbon.funkthat.com:/usr/obj/i386.i386/usr/src/sys/serbox i386 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: AMD-K6tm w/ multimedia extensions (200.46-MHz 586-class CPU) Origin="AuthenticAMD" Id=0x562 Family=0x5 Model=0x6 Stepping=2 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> AMD Features=0x400<<b10>> real memory = 134217728 (128 MB) avail memory = 120770560 (115 MB) random: <Software, Yarrow> initialized kbd1 at kbdmux0 ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. pcib0 pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard pci0: <PCI bus> on pcib0 $PIR: No matching entry for 0.7.INTD isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C586B UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6000-0x600f at device 7.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 uhci0: <VIA 83C572 USB controller> port 0x6400-0x641f irq 10 at device 7.2 on pci0 usbus0 on uhci0 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x6800-0x683f mem 0xe0100000-0xe0100fff,0xe0000000-0xe00fffff irq 11 at device 10.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> PHY 1 on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow fxp0: Ethernet address: 00:d0:b7:90:17:c9 cpu0 on motherboard attimer0: <AT timer> at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] unknown: <PNP0c01> can't assign resources (memory) uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0 fdc0: <Enhanced floppy controller> at port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 pnpid PNP0700 on isa0 ppc0: <Standard parallel printer port> at port 0x378-0x37f,0x778-0x77b irq 7 pnpid PNP0400 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c01> can't assign resources (memory) Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 ugen0.1: <VIA> at usbus0 uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <TRANSCEND 20070831> ATA-0 device ada0: Serial Number 0 0011B1EA ada0: 16.700MB/s transfers (PIO4, PIO 512bytes) ada0: 15296MB (31326208 512 byte sectors: 15H 63S/T 16383C) ada0: Previously was known as ad0 random: unblocking device. Timecounter "TSC" frequency 200460356 Hz quality 800 uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus0 usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) Root mount waiting for: usbus0 usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR Root mount waiting for: usbus0 usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) Root mount waiting for: usbus0 Root mount waiting for: usbus0 usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR Root mount waiting for: usbus0 usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) Root mount waiting for: usbus0 Root mount waiting for: usbus0 usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) Root mount waiting for: usbus0 Root mount waiting for: usbus0 usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR Root mount waiting for: usbus0 usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) Root mount waiting for: usbus0 Root mount waiting for: usbus0 usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR ugen0.2: <Unknown> at usbus0 (disconnected) uhub_reattach_port: could not allocate new device Root mount waiting for: usbus0 ugen0.2: <Prolific Technology Inc.> at usbus0 Trying to mount root from ufs:/dev/ada0s1a [rw]... ugen0.3: <ALCOR> at usbus0 uhub1: <ALCOR USB Hub 2.0, class 9/0, rev 2.00/7.02, addr 3> on usbus0 uhub1: 4 ports with 4 removable, self powered ugen0.4: <ALCOR> at usbus0 uhub2: <ALCOR USB Hub 2.0, class 9/0, rev 2.00/7.02, addr 4> on usbus0 uhub2: 4 ports with 4 removable, self powered ugen0.5: <Prolific Technology Inc.> at usbus0 ugen0.6: <Prolific Technology Inc.> at usbus0 uplcom0: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 2.00/3.00, addr 5> on usbus0 uplcom1: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 2.00/3.00, addr 6> on usbus0 uplcom2: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 2.00/3.00, addr 2> on usbus0 --tjCHc7DPkfUGtrlw--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140904185414.GL82175>