Date: Wed, 15 Oct 2025 03:05:22 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: emaste@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-stable-15-amd64-test - Build #70 - Still Failing Message-ID: <1981459841.1361.1760497522616@jenkins.ci.freebsd.org> In-Reply-To: <1929668941.1341.1760482911640@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-stable-15-amd64-test - Build #70 (ba89a061d0bae42c4367bc5408b8c51fd63a2715) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/70/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/70/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/70/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 608043e6d029a00170a0a80d52fa9afdf209c692 by emaste: Cirrus-CI: Bump to FreeBSD 14.3 image f283515a1015b5e02dee2b3f4504e7a5ca1a5cfe by emaste: Cirrus-CI: Use nproc instead of sysctl -n hw.ncpu 2ef79b0524b516792f1ebb1c623999ef2ec06408 by emaste: Cirrus-CI: Build packages in parallel ba89a061d0bae42c4367bc5408b8c51fd63a2715 by emaste: Cirrus-CI: Switch back to tzst packages, but use level 1 The end of the build log: [...truncated 3.90 MiB...] epair0b: Ethernet address: 82:4f:5b:54:0c:8b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 12:78:d3:20:99:89 epair1b: Ethernet address: 2e:d6:d5:f0:74:e7 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.172s] sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 82:91:29:ca:52:66 epair0b: Ethernet address: 5a:a3:08:86:33:be epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 5a:7d:29:83:3d:39 epair1b: Ethernet address: 9a:7f:a1:49:4e:6a epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.223s] sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 6a:db:fa:f9:72:8b epair0b: Ethernet address: 12:fa:84:1b:ee:11 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: ae:58:3f:df:cc:d2 epair1b: Ethernet address: 86:25:f0:a3:43:f9 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.173s] sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 72:55:b6:66:7c:65 epair0b: Ethernet address: 7a:76:5d:b9:eb:6a epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 3e:41:40:c1:ba:d6 epair1b: Ethernet address: 02:a6:8a:79:0c:34 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.162s] sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 22:25:0d:f8:37:6e epair0b: Ethernet address: 3a:fa:6e:c0:d6:b1 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: be:92:68:a4:51:58 epair1b: Ethernet address: 02:b7:b5:7b:00:f3 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.212s] sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 7a:e5:b8:dc:0d:81 epair0b: Ethernet address: 0e:9c:5b:05:17:55 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 6a:c5:34:c4:ad:aa epair1b: Ethernet address: 12:8e:2e:df:34:59 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.287s] sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 0a:3f:c0:57:e6:c2 epair0b: Ethernet address: fa:f5:98:2c:05:1c epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 9e:41:df:97:44:6f epair1b: Ethernet address: 6e:40:3a:13:3d:d7 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.223s] sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 22:31:6b:6b:06:5c epair0b: Ethernet address: 86:47:e7:d5:e9:01 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: ce:37:4a:4e:0a:19 epair1b: Ethernet address: 3e:3a:df:78:72:d8 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.181s] sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: f6:a1:35:88:ef:cd epair0b: Ethernet address: f2:ea:b1:ba:03:58 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: e6:cd:61:e3:92:af epair1b: Ethernet address: 86:b0:c2:87:04:f9 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: d6:e2:80:30:a2:d6 epair2b: Ethernet address: da:12:34:11:b2:18 epair2a: link state changed to UP epair2b: link state changed to UP epair2b: link state changed to DOWN epair2a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.343s] sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 7e:fd:ad:2d:cf:11 epair0b: Ethernet address: 82:65:0e:fd:a7:e0 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: de:93:ef:ef:45:15 epair1b: Ethernet address: ba:51:b6:15:ea:b7 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 6a:82:77:39:f9:2a epair2b: Ethernet address: a6:b6:ee:39:a1:63 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled lo0: promiscuous mode disabled epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair2a: link state changed to DOWN epair2b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [6.035s] sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: ee:9d:c8:3a:cf:4a epair0b: Ethernet address: 6a:7d:8d:d4:54:c2 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 9e:bd:4b:13:04:ef epair1b: Ethernet address: 5e:2a:27:50:cc:f7 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 96:2f:99:90:d8:a9 epair2b: Ethernet address: 4a:df:fc:22:72:d7 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x18 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80c0f0e2 stack pointer = 0x28:0xfffffe008aef2980 frame pointer = 0x28:0xfffffe008aef29c0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (swi1: netisr 0) rdi: fffffe008aef29d8 rsi: fffff80057532996 rdx: 00000000ffffffff rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003 rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0 r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000 r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5 trap number = 12 panic: page fault cpuid = 1 time = 1760497505 KDB: stack backtrace: #0 0xffffffff80bc02ed at kdb_backtrace+0x5d #1 0xffffffff80b736d6 at vpanic+0x136 #2 0xffffffff80b73593 at panic+0x43 #3 0xffffffff8107bf69 at trap_pfault+0x3c9 #4 0xffffffff81051d78 at calltrap+0x8 #5 0xffffffff80d84aa9 at in6_cksum_partial_l2+0x109 #6 0xffffffff8295cab5 at fr_cksum+0xa5 #7 0xffffffff829621dd at ipf_checkl4sum+0xbd #8 0xffffffff829586f6 at ipf_checkv6sum+0x56 #9 0xffffffff8295a601 at ipf_makefrip+0x1691 #10 0xffffffff8295b6de at ipf_check+0x15e #11 0xffffffff82958c28 at ipf_check_wrapper6+0x58 #12 0xffffffff80cc33e8 at pfil_mbuf_in+0x38 #13 0xffffffff80d92b24 at ip6_input+0x484 #14 0xffffffff80cc0c48 at swi_net+0x128 #15 0xffffffff80b2d309 at ithread_loop+0x239 #16 0xffffffff80b2989b at fork_exit+0x7b #17 0xffffffff81052d9e at fork_trampoline+0xe Uptime: 1h18m17s Automatic reboot in 15 seconds - press a key on the console to abort + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-70' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-zfs-tests.sh x ./run-kyua.sh x ./run.sh x ./disable-notyet-tests.sh x ./auto-shutdown x ./disable-dtrace-tests.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins11542700146742095292.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': 'ba89a061d0bae42c4367bc5408b8c51fd63a2715', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: stable-15/latest_tested/amd64/amd64 -> ../../ba89a061d0bae42c4367bc5408b8c51fd63a2715/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshelp
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1981459841.1361.1760497522616>