Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 08 Aug 2004 16:10:23 -0700
From:      "Peter Barton" <peter_barton_bsd@hotmail.com>
To:        freebsd-questions@freebsd.org
Subject:   DHCP help
Message-ID:  <BAY12-F3Aj5IPGWHEjE0002fd83@hotmail.com>

next in thread | raw e-mail | index | archive | help
Hello -

I have been struggling with my DHCP connection for quite some time and even 
though my interent search yielded some information that I used, the whole 
thing still won't work. My problem is that my dhclient never finds any DHCP 
servers on the Comcast network. The default dhclient that came with the 
installation simply times out, the other one that I 'make installed' 
according to the info posted at 
http://networking.ringofsaturn.com.Unix/ipnatdfirewall.php keeps complaining 
about my subnet(s). I would greatly appreciate any help, I have spent a lot 
of time on this without any luck.

Thanks,
Peter


Here's my rc.conf------------------------------------

# -- sysinstall generated deltas -- # Sat Jul 17 06:31:46 2004
# Created: Sat Jul 17 06:31:46 2004
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.

linux_enable="YES"
moused_enable="YES"
usbd_enable="YES"
natd_enable="YES"
natd_flags="-s -u -m"
firewall_enable="YES"
firewall_quiet="NO"
firewall_logging_enable="YES"
firewal_type="open"
gateway_enable="YES"

ifconfig_rl0="inet 192.168.254.1 up netmask 255.255.255.0"
ifconfig_rl1="DHCP"

#defaultrouter="192.168.1.1"
hostname="bsd.peterbohm.com"




Here's my dmesg.boot------------------------------------

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Sun Aug  8 13:47:14 MDT 2004
    root@bsd.peterbohm.com:/usr/src/sys/i386/compile/RIPPER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc068f000.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 448054907 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (448.05-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 134217728 (128 MB)
avail memory = 123297792 (117 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00edd10
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on 
motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x44000000-0x47ffffff 
at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x2400-0x24ff mem 
0x41100000-0x411000ff irq 11 at device 15.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect 
mode
rl0: Ethernet address: 00:50:22:e3:b5:9d
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0x2800-0x28ff mem 
0x41200000-0x412000ff irq 11 at device 16.0 on pci0
rl1: Realtek 8139B detected. Warning, this may be unstable in autoselect 
mode
rl1: Ethernet address: 00:50:22:e3:b4:76
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x2020-0x202f at device 20.1 
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2000-0x201f irq 11 
at device 20.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 20.3 (no driver attached)
orm0: <Option ROMs> at iomem 0xe0000-0xe7fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0c02> can't assign resources (port)
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to 
deny, logging unlimited
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: 6149MB <FUJITSU MPD3064AT> [13328/15/63] at ata0-master UDMA33
acd0: CDROM <FX162N> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 4 files 1
/var: superblock summary recomputed

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY12-F3Aj5IPGWHEjE0002fd83>