Date: Sat, 26 Jun 1999 13:50:38 +0600 (ESS) From: Ilia Chipitsine <ilia@cgilh.chel.su> To: s8628216@sunss106.cc.cycu.edu.tw Cc: freebsd-questions@FreeBSD.ORG Subject: Re: HELP... Message-ID: <Pine.BSF.4.05.9906261347470.247-100000@localhost.cgu.chel.su> In-Reply-To: <3773D5E1.12A464B5@mbox.cycu.edu.tw>
next in thread | previous in thread | raw e-mail | index | archive | help
press any key during countdown (except enter) from the "diskXXX>" prompt type set root_disc_unit=2 (try 0,1,2,3,4,5,...:-), after boot log in as root and # echo "1:wd(2,a)kernel" > boot.config (it works for IDE, for SCSI _maybe_ it will be "sd(2,a)kernel") Regards, (Наилучшие пожелания) Ilia Chipitsine (Илья Шипицин) On Sat, 26 Jun 1999, ID4 wrote: > sorry,I'm from TAIWAN so my english is very bad. > > I have two question... > > Questions 1 is : > (my computer device: p-mmx200 , 64mb ram(nec) , s3virge-dx/gx pci > +voodoo2 , hard disk 1 is IBM 10.4 g.b(in master , and quentum > (fireball) 4 g.b, Symbios Logic 8100S PCI SCSI Adapter;53C810 Device, > Asus cd-rom 40x , TEAC-R55S cd-r,and the master h.d is windows 98,so I > install FreeBSD in primary slave hd. so,I need to change bios to boot > from " D: A: "(because C: is win) > > If I choice "ALL" to install,when finished and reboot,it's error > message is : > > waiting 15 sec. for SCSI devices to settle > changing root to wd0s1a > changing root to wd0a > error 6: panic; cannot mount root (2) > > > syncing disks...done > cd0: at ncro bus 0 target 1 lun 0 > cd0: <TEAC CD-R55S 1.0 L> Removable CD-ROM SCSI-2 device > cd0: 10.0 MB/s tranfers (10.0 MHz, offset 8) > cd0: Attempt to query device size failed: Not ready,Medium not present > > and then,it will reboot automatic. (My SCSI is 10M /s,just for CD-R to > use) > > > > Question 2 is : > (This computer is p-133,s3(the same as above), quentum fireball 3 > gb, teac 32x CD-ROM) > > My install is still "ALL",but when I type " startx" (without > setup),the message is : > > execve failed for /usr/X11R6/bin/X (errno 2) > -X11TranSocketUNIXConnect: can't connect errno=2 > -X11TranSocketUNIXConnect: can't connect errno=2 > -X11TranSocketUNIXConnect: can't connect errno=2 > -X11TranSocketUNIXConnect: can't connect errno=2 > -X11TranSocketUNIXConnect: can't connect errno=2 > > giving up > xinit: No such file or directory (errno 2) : unable to connect to X > server > xinit: No such process (errno 3): Server error > > if I setup the X11R6Setup,even thought i do nothing and quit qhe > setup, I can't enter the X11R6Setup.Therefore, how could I enter my > startx? > > please reply to s8628216@mbox.cycu.edu.tw thankx. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9906261347470.247-100000>