Date: Fri, 27 Feb 2004 13:54:05 +0200 From: Andrey Kotrekhov <kota@at.com.ua> To: Simon <simon@optinet.com> Cc: "freebsd-hardware@freebsd.org" <freebsd-hardware@freebsd.org> Subject: Re: FreeBSD crash on 2xCPU with HTT motherboard, help.... Message-ID: <403F2FDD.2090408@at.com.ua> In-Reply-To: <20040227102604.634B443D39@mx1.FreeBSD.org> References: <20040227102604.634B443D39@mx1.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Simon wrote: >Have you tried with ACPI support disabled? what about HT disabled? >do a burn-in test without any changes to see if you can cause the >server to crash and then with those 2 features disabled to see if it still >crashes and take it from there. If it still crashes, try FreeBSD 4.9-R >to make sure it is not your hardware. > We have the same computer under 4.9R without problem. But we have another computer with FreeBSD5.2 with 1 HTT CPU and it work fine under havy loading. We use even mapping pthread to kse library for any process (we have many threaded processes on this computer) And there is no problem. Computer with problem doesn't use kse library in any process as I know. Does anybody use 2 HTT CPU computer under FreeBSD5.2? Is it right list for discussing this problem? Can anybody recommend me another maillist where I can ask about this problem? > >-Simon > >On Fri, 27 Feb 2004 11:57:17 +0200, Andrey Kotrekhov wrote: > > > >>ahh ... The motherboard is >>SUPER X5DEi-GG >> >>Andrey Kotrekhov wrote:SUPER X5DEi-GG >> >> >> >>>Hi, All! >>>We have 5.2-RC FreeBSD 5.2-RC on motherboard with 2 HTT CPU. >>>But periodically system crash with message: >>> >>>Fatal trap 12: page fault while kernel mode >>>cpuid=1 >>>fault code = supervisor real, page not present >>>Current process = 15558 (snmset) >>> >>>After some crash we have written new BIOS. >>>Near month system didn't crash. >>>But today it crashs ones more. >>>Has anybody the same working system with 2HTT CPU which works with >>>havy loading >>> >>>This is in dmesg.boot: >>> >>>Preloaded elf module "/boot/kernel/acpi.ko" at >>>0xc07d42bc. Timecounter "i8254" frequency 1193182 >>>Hz quality 0 CPU: Intel(R) Xeon(TM) CPU >>>2.40GHz (2400.11-MHz 686-class CPU) Origin = >>>"GenuineIntel" Id = 0xf25 Stepping = 5 >>>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C >>>MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >>> Hyperthreading: 2 logical >>>CPUs real memory = >>>1073676288 (1023 MB) avail >>>memory = 1037709312 (989 >>>MB) ACPI APIC Table: >>><RCC GCHE > >>>FreeBSD/SMP: Multiprocessor System Detected: 4 >>>CPUs cpu0 (BSP): APIC ID: >>>0 cpu1 (AP): >>>APIC ID: 1 >>>cpu2 (AP): APIC ID: >>>6 cpu3 (AP): >>>APIC ID: 7 >>>ioapic0 <Version 1.1> irqs 0-15 on >>>motherboard ioapic1 <Version 1.1> irqs >>>16-31 on motherboard ioapic2 <Version >>>1.1> irqs 32-47 on motherboard Pentium >>>Pro MTRR support enabled >>> ACPI-0660: *** Warning: Type override - [DEB_] had invalid type >>>(Integer) fo >>>r Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [MLIB] had invalid type (Integer) fo >>>r Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [IO__] had invalid type (Integer) fo >>>r Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [DATA] had invalid type (String) for >>>Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [SIO_] had invalid type (String) for >>>Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [SB__] had invalid type (String) for >>>Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [PM__] had invalid type (String) for >>>Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [ICNT] had invalid type (String) for >>>Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [ACPI] had invalid type (String) for >>>Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [IORG] had invalid type (String) for >>>Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [SB__] had invalid type (String) for >>>Scope operator, changed to (Scope) >>> ACPI-0660: *** Warning: Type override - [PM__] had invalid type >>>(String) for >>>Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [SIO_] had invalid type (String) for >>>Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [PM__] had invalid type (String) for >>>Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [BIOS] had invalid type (Integer) fo >>>r Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [CMOS] had invalid type (Integer) fo >>>r Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [KBC_] had invalid type (Integer) fo >>>r Scope operator, changed to >>>(Scope) ACPI-0660: *** >>>Warning: Type override - [OEM_] had invalid type (Integer) fo >>>r Scope operator, changed to >>>(Scope) npx0: >>>[FAST] >>>npx0: <math processor> on >>>motherboard npx0: INT 16 >>>interface >>>acpi0: <RCC GCHE > on >>>motherboard acpi0: Power Button >>>(fixed) Timecounter >>>"ACPI-safe" frequency 3579545 Hz quality 1000 >>>pcibios: BIOS version >>>2.10 Using $PIR >>>table, 11 entries at 0xc00f4a50 >>>unknown: I/O range not >>>supported acpi_timer0: >>><32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 >>>acpi_cpu0: <CPU> on >>>acpi0 acpi_cpu1: >>><CPU> on acpi0 >>>acpi_cpu1: Failed to attach throttling >>>P_CNT acpi_cpu2: <CPU> on >>>acpi0 acpi_cpu2: >>>Failed to attach throttling P_CNT >>>acpi_cpu3: <CPU> on >>>acpi0 acpi_cpu3: >>>Failed to attach throttling P_CNT >>>acpi_cpu4: <CPU> on >>>acpi0 >>>device_probe_and_attach: acpi_cpu4 attach returned >>>6 acpi_cpu4: <CPU> on >>>acpi0 >>>device_probe_and_attach: acpi_cpu4 attach returned >>>6 acpi_cpu4: <CPU> on >>>acpi0 >>>device_probe_and_attach: acpi_cpu4 attach returned >>>6 acpi_cpu4: <CPU> on >>>acpi0 >>>device_probe_and_attach: acpi_cpu4 attach returned >>>6 acpi_button0: <Sleep Button> on >>>acpi0 pcib0: <ACPI Host-PCI >>>bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI >>>PCI bus> on pcib0 >>>ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xd400-0xd4ff mem >>>0xfebfd000-0xfeb >>>fdfff irq 18 at device 4.0 on pci0 >>>.... >>> >>> >>>__ >>>Andrey >>> >>>_______________________________________________ >>>freebsd-hardware@freebsd.org mailing list >>>http://lists.freebsd.org/mailman/listinfo/freebsd-hardware >>>To unsubscribe, send any mail to >>>"freebsd-hardware-unsubscribe@freebsd.org" >>> >>> >>_______________________________________________ >>freebsd-hardware@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-hardware >>To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org" >> >> >> > > >_______________________________________________ >freebsd-hardware@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-hardware >To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?403F2FDD.2090408>