Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 4 Dec 2016 18:41:31 -0800
From:      Adrian Chadd <adrian.chadd@gmail.com>
To:        Oleksandr Tymoshenko <gonzo@bluezbox.com>
Cc:        "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org>
Subject:   Re: Problem with Intel Centrino Wireless-N 1000 on ARM
Message-ID:  <CAJ-VmomkVFzPuO_XMmM=hYt5e7N02_saG3Py_tyam%2BV6M_bLrw@mail.gmail.com>
In-Reply-To: <9770367E-AEC9-4849-9F9E-47B4E35F724F@bluezbox.com>
References:  <9770367E-AEC9-4849-9F9E-47B4E35F724F@bluezbox.com>

next in thread | previous in thread | raw e-mail | index | archive | help
hiya,

it's totally possible some endian clean stuff is missing from the driver :(



-adrian


On 4 December 2016 at 15:32, Oleksandr Tymoshenko <gonzo@bluezbox.com> wrot=
e:
> Hello,
>
> I am trying to get Intel Centrino Wireless-N 1000 working on one of
> my ARM boards. iwn(4) recognizes it but I can=E2=80=99t associate it with
> AP or get scan results. I am not sure whether it=E2=80=99s an iwn on ARM =
problem
> or this card in general. I=E2=80=99d appreciate any hints on how to debug=
 this
> issue.
>
> My test script:
> sysctl dev.iwn.0.debug=3D0x8007
> ifconfig wlan create wlandev iwn0
> wlandebug -i wlan0 +dumppkts+scan+debug
> ifconfig wlan0 up scan
>
> Card=E2=80=99s dmesg:
>
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: <Intel Centrino Wireless-N 1000>=
 irq 104 at device 0.0 on pci1
> Dec  4 23:25:25 jetson-tk1 kernel: pcib1: allocated initial memory window=
 of 0x13100000-0x131fffff
> Dec  4 23:25:25 jetson-tk1 kernel: pcib1: allocated memory range (0x13100=
000-0x13101fff) for rid 10 of iwn0
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: Lazy allocation of 0x2000 bytes =
rid 0x10 type 3 at 0x13100000
> Dec  4 23:25:25 jetson-tk1 kernel: ofw_pci mapdev: start 13100000, len 81=
92
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: attempting to allocate 1 MSI vec=
tors (1 supported)
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: using IRQ 106 for MSI
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: MIMO 1T2R, BGS, address 74:e5:0b=
:53:04:ec
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 1=
1Mbps
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 1=
1Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: 1T2R
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: 11ng MCS 20MHz
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: MCS 0-7: 6.5Mbps - 65Mbps
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: 11ng MCS 20MHz SGI
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: MCS 0-7: 7Mbps - 72Mbps
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: 11ng MCS 40MHz:
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: MCS 0-7: 13.5Mbps - 135Mbps
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: 11ng MCS 40MHz SGI:
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: MCS 0-7: 15Mbps - 150Mbps
> Dec  4 23:25:25 jetson-tk1 kernel: wlan0: bpf attached
> Dec  4 23:25:25 jetson-tk1 kernel: wlan0: bpf attached
> Dec  4 23:25:25 jetson-tk1 kernel: wlan0: Ethernet address: 74:e5:0b:53:0=
4:ec
> Dec  4 23:25:25 jetson-tk1 kernel: wlan0: start running, 0 vaps running
> Dec  4 23:25:25 jetson-tk1 kernel: wlan0: ieee80211_start_locked: up pare=
nt iwn0
> Dec  4 23:25:25 jetson-tk1 kernel: iwn0: iwn_read_firmware: ucode rev=3D0=
x271f0501
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D0; qid 0 idx 0 f=
lags 0 type 1(UC_READY) len 36
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D1; qid 4 idx 0 f=
lags 0 type 90(IWN5000_CMD_WIMAX_COEX) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D2; qid 4 idx 1 f=
lags 0 type 176(IWN_CMD_PHY_CALIB) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D3; qid 4 idx 2 f=
lags 0 type 101(IWN5000_CMD_CALIB_CONFIG) len 8
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D4; qid 0 idx 1 f=
lags 0 type 102(IWN5000_CMD_CALIB_RESULT) len 12
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D5; qid 0 idx 2 f=
lags 0 type 102(IWN5000_CMD_CALIB_RESULT) len 296
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D6; qid 0 idx 3 f=
lags 0 type 102(IWN5000_CMD_CALIB_RESULT) len 92
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D7; qid 0 idx 4 f=
lags 0 type 102(IWN5000_CMD_CALIB_RESULT) len 52
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D8; qid 0 idx 5 f=
lags 0 type 103(IWN5000_CMD_CALIB_COMPLETE) len 8
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D0; qid 0 idx 0 f=
lags 0 type 1(UC_READY) len 36
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D1; qid 4 idx 0 f=
lags 0 type 90(IWN5000_CMD_WIMAX_COEX) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D2; qid 4 idx 1 f=
lags 0 type 176(IWN_CMD_PHY_CALIB) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D3; qid 4 idx 2 f=
lags 0 type 176(IWN_CMD_PHY_CALIB) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D4; qid 4 idx 3 f=
lags 0 type 176(IWN_CMD_PHY_CALIB) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D5; qid 4 idx 4 f=
lags 0 type 176(IWN_CMD_PHY_CALIB) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D6; qid 4 idx 5 f=
lags 0 type 176(IWN_CMD_PHY_CALIB) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_config: configuring valid TX chain=
s 0x1
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D7; qid 4 idx 6 f=
lags 0 type 152(IWN5000_CMD_TX_ANT_CONFIG) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D8; qid 4 idx 7 f=
lags 0 type 155(IWN_CMD_BT_COEX) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_config: rxchainmask=3D0x3, nrxchai=
ns=3D2
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D9; qid 4 idx 8 f=
lags 0 type 16(IWN_CMD_RXON) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D10; qid 4 idx 9 =
flags 0 type 24(ADD_NODE_DONE) len 8
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D11; qid 4 idx 10=
 flags 0 type 78(IWN_CMD_LINK_QUALITY) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn5000_set_txpower: setting TX power;=
 rev=3D5
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D12; qid 4 idx 11=
 flags 0 type 149(IWN_CMD_TXPOWER_DBM) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D13; qid 4 idx 12=
 flags 0 type 164(IWN_CMD_SET_CRITICAL_TEMP) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D14; qid 4 idx 13=
 flags 0 type 119(IWN_CMD_SET_POWER_MODE) len 4
> Dec  4 23:25:25 jetson-tk1 kernel: wlan0: start running, 1 vaps running
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_newstate: INIT -> SCAN
>
> Than it just goes like this:
>
> Dec  4 23:25:25 jetson-tk1 kernel: sending scan command nchan=3D1
> Dec  4 23:25:25 jetson-tk1 kernel: wlan0: iwn_notif_intr: cur=3D24; qid 4=
 idx 17 flags 0 type 128(IWN_CMD_SCAN) len 8
> Dec  4 23:25:25 jetson-tk1 kernel: scan_curchan_task: waiting
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D25; qid 0 idx 8 =
flags 0 type 130(START_SCAN) len 24
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: scanning channel 11 st=
atus 1
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D26; qid 0 idx 9 =
flags 0 type 131(IWN_CMD_SCAN_RESULTS) len 20
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_notif_intr: cur=3D27; qid 0 idx 10=
 flags 0 type 132(STOP_SCAN) len 16
> Dec  4 23:25:25 jetson-tk1 kernel: scan finished nchan=3D1 status=3D1 cha=
n=3D11
> Dec  4 23:25:25 jetson-tk1 kernel: wlan0: ieee80211_swscan_scan_next: cal=
led
> Dec  4 23:25:25 jetson-tk1 kernel: wlan0: scan_curchan_task: loop start; =
scandone=3D0
> Dec  4 23:25:25 jetson-tk1 kernel: wlan0: scan_curchan_task: chan  11g ->=
   7g [active, dwell min 20ms max 200ms]
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_scan: ssid_len=3D0, ssid=3D
> Dec  4 23:25:25 jetson-tk1 kernel: iwn_scan: chan 7 flags 0x1 rf_gain 0x2=
8 dsp_gain 0x6e active 33 passive 100 scan_svc_time 16879616 crc 0xffff isa=
ctive=3D0 numssid=3D0
>
> without any RX frames or scan results.
>
> Thank you
> _______________________________________________
> freebsd-wireless@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.or=
g"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmomkVFzPuO_XMmM=hYt5e7N02_saG3Py_tyam%2BV6M_bLrw>