Date: Sun, 7 Mar 2021 10:33:24 -0700 From: Warner Losh <imp@bsdimp.com> To: "Rodney W. Grimes" <rgrimes@freebsd.org> Cc: Tomoaki AOKI <junchoon@dec.sakura.ne.jp>, FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Subject: Re: FreeBSD-13.0-RC1-amd64-disc1.iso unbootable on memstick Message-ID: <CANCZdfpgfDPM5JSTCu5MHGki-sji_zuwwWynof0=SeWWAD5PaQ@mail.gmail.com> In-Reply-To: <202103071118.127BId2B068337@gndrsh.dnsmgr.net> References: <20210307195533.f92a0573c77213d1d41eb24d@dec.sakura.ne.jp> <202103071118.127BId2B068337@gndrsh.dnsmgr.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Mar 7, 2021, 9:49 AM Rodney W. Grimes <freebsd@gndrsh.dnsmgr.net> wrote: > > Hi. > > > > Are you shure you're using *.memstick.img? > > I am shure I am NOT using memstick, as the subject says > I am using: > FreeBSD-13.0-RC1-amd64-disc1.iso > > > > *.iso are for optical drives. > > Ah, not since 12.0, these are now "hybrid" type images that > are designed to be written to either a dvd or memstick. > > > If your memstick can perfectly (or at least enough for CD loader and > > kernel) mimic optical drive, maybe with help by firmware, it would be > > able to boot. > > > > Otherwise, you should write FreeBSD-13.0-RC1-*-memstick.img with > > dd. If you are using enough-sized memstick and amd64 arch PC, > > FreeBSD-13.0-RC1-amd64-mrmstick.img should be preferred. > > > > Note that if you downloaded smaller xz compressed image, you shoule > > decompress it before writing. > > > > If you are using *-memstick.img, something should need fixed. > > I have tested the memstick image it works fine. > > I have also done further investigation and this appears to be > a Legacy/bios vs EFI mode issue. All legacy only machines > fail to boot with the above error, all dual mode machines > must be forced into either EFI only, or dual mode/EFI first > inorder to boot these images. EFI only machines boot fine. > > Is what it looks like is we have lost the ability to boot > the .iso images in bios mode from a memory stick. I have > NOT done any testing on dvd media. > > Further note all of this works fine upto and including BETA4 > on all my legacy bios machines, though I do see another > environment that fails at BETA4 and continues to, but that > is rather special, called ventoy: > https://www.ventoy.net/ > that environment is probably looking very much like a > legacy BIOS system as to the way I have my ventoy setup. > By chance, have you tried this with qemu or bhyve? If it is reproducible there, it's a lot easier to investigate. Bisecting changes on the releng/13.0 branch becomes possible quickly then.... Warner > > On Sun, 7 Mar 2021 01:06:14 -0800 (PST) > > "Rodney W. Grimes" <freebsd@gndrsh.dnsmgr.net> wrote: > > > > > Glen, > > > Things get worse... I could at least boot the BETA4 .iso when > > > I wrote it to a memstick. I can NOT boot the RC1. I have checked > > > the sha512 of my image, wrote it twice, same results, I get: > > I have now had Michael Dexter duplicate my findings, if he > sets his machines to either legacy first, or legacy only > he gets the same boot failures that I do when using the > FreeBSD-13.0-RC1-amd64-disc1.iso > image. > > > > > > > CD Loader 1.2 > > > > > > Bulding the boot loader arguments > > > Looking up /BOOT/LOADER... File not found > > > Looking up /boot/loader... File not found > > > Boot failed > > > > > > I have tried 2 different systems, all known to have booted and > > > installed many many many FreeBSD's from prior .iso written to > > > memstick. > > Now expanded to 4 systems, 2 of which can do dual mode Legacy/EFI. > > > > > > > Regards, > > > -- > > > Rod Grimes > rgrimes@freebsd.org > > > _______________________________________________ > > > freebsd-stable@freebsd.org mailing list > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > To unsubscribe, send any mail to " > freebsd-stable-unsubscribe@freebsd.org" > > > > > > -- > > Tomoaki AOKI <junchoon@dec.sakura.ne.jp> > > > > -- > Rod Grimes > rgrimes@freebsd.org > _______________________________________________ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CANCZdfpgfDPM5JSTCu5MHGki-sji_zuwwWynof0=SeWWAD5PaQ>