Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 26 Nov 2003 23:27:46 -0800
From:      Kent Stewart <kstewart@owt.com>
To:        "Eric Crist" <ecrist@tech-con-inc.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: Make world problems from 4.9 to 5.1
Message-ID:  <200311262327.46751.kstewart@owt.com>
In-Reply-To: <002801c3b497$2a205810$6401a8c0@grog>
References:  <002801c3b497$2a205810$6401a8c0@grog>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 26 November 2003 07:33 pm, Eric Crist wrote:
> Ok,
>
> Read through that.  Now I'm getting the following after running the make
> buildworld:
>
> [[snip]]
> cc -fpic -DPIC -O -pipe -mcpu=pentiumpro -DPTHREAD_KERNEL
> -I/usr/src/lib/libpthread/../libc/include
> -I/usr/src/lib/libpthread/thread
> -I/usr/src/lib/libpthread/../../include
> -I/usr/src/lib/libpthread/arch/i386/include
> -I/usr/src/lib/libpthread/sys
> -I/usr/src/lib/libpthread/../../libexec/rtld-elf -fno-builtin
> -D_LOCK_DEBUG -D_PTHREADS_INVARIANTS -Wall
> -I/usr/src/lib/libpthread/../libc/i386 -I/usr/src/lib/libpthread/thread
> -c /usr/src/lib/libpthread/arch/i386/i386/thr_switch.S  -o thr_switch.So
> cc -fpic -DPIC -O -pipe -mcpu=pentiumpro -DPTHREAD_KERNEL
> -I/usr/src/lib/libpthread/../libc/include
> -I/usr/src/lib/libpthread/thread
> -I/usr/src/lib/libpthread/../../include
> -I/usr/src/lib/libpthread/arch/i386/include
> -I/usr/src/lib/libpthread/sys
> -I/usr/src/lib/libpthread/../../libexec/rtld-elf -fno-builtin
> -D_LOCK_DEBUG -D_PTHREADS_INVARIANTS -Wall  -c
> /usr/src/lib/libpthread/sys/lock.c -o lock.So
> building shared library libkse.so.1
> *** Error code 1
>
> Stop in /usr/src/lib/libpthread.

The one fix I found in the archives is what I was talking about but couldn't 
find in UPDATING. It involved

make NOLIBPTHREAD=true buildworld
...
make NOLIBPTHREAD=true installworld

and then redoing everything with out the NOLIBPTHREAD. According to the 
comments, it was supposed to be fixed in -current but was not added to 
RELENG_5_1 because it wasn't a security problem. I would search on the 
variable and see if you find the message(s) and a patch. I thought it was by 
Ruslan but that didn't produce anything in a search. I've run out of search 
engine choices.

FWIW, there are a few people that have bumped into it. ANy messages from them 
have been expired and deleted for a long time.

Kent
> *** Error code 1
>
> Stop in /usr/src/lib.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
>
> [[end snip]]
>
> Please help.
>
> TIA
>
> Eric F Crist
> AdTech Integrated Systems, Inc
> (952) 403-9000
>
> -----Original Message-----
> From: Kent Stewart [mailto:kstewart@owt.com]
> Sent: Wednesday, November 26, 2003 8:02 PM
> To: Eric Crist
> Subject: Re: Make world problems from 4.9 to 5.1
>
> On Wednesday 26 November 2003 05:45 pm, you wrote:
> > Are you referring to the:
> >
> > To get around the installworld problem, do:
> > 	#cd /usr/src/usr.bin/sed
> > 	#make install
> > 	#cd /usr/src
> > 	#make installworld
> > If that doesn't work, then try:
> > 	# make -k installworld
> > 	# make installworld
>
> There is a sequence that starts
>
>     To upgrade in-place from 4.x-stable to current
>         ----------------------------------------------
>         # 5.x uses more space than 4.x.  Also, the location of kernel
>         # modules has changed.  If you are installing 5.0 onto a 4.x
>         # system, you'll need about 30MB of free disk space on your /
>         # partition.  If you have less than this, you may encounter
> difficult
>         # to back out of problems with this procedure.  If /tmp is on
>         # the / partition, you may want to completely remove all its
> content
>         # before upgrading, as this can be a common source of shortage
> of
>         # space on /.
>
> But I remember having a sequence where you had to do a -d and that isn't
> there
> any more. BTW, when they changed statfs on 5-current not too long ago, a
> make
> world would have rendered your system unbootable.
>
> I have a machine that is running 4-stable and because of the increased
> usage,
> I will do a clean install. Coral has a / with around 60-80 MB used and
> 5.x
> needs about 2x more and I have /var and /tmp as 1.5GB systems because I
> log
> everything from cvsup to "make index" and store the logs on
> /var/log/build. I
> have either /usr/src or /usr/obj 49% used on 1.5GB partitions. I suspect
> it
> is /usr/obj but it is running XP right now. I like more freespace and
> will
> have a 500MB /. I have /usr/src and /usr/obj on different controllers
> (IDE)
> so that I have concurrent I/O. If you use scsi, it doesn't matter as
> much.
>
> Kent
>
> > Eric F Crist
> > AdTech Integrated Systems, Inc
> > (952) 403-9000
> >
> > -----Original Message-----
> > From: Kent Stewart [mailto:kstewart@owt.com]
> > Sent: Wednesday, November 26, 2003 7:24 PM
> > To: Eric Crist
> > Subject: Re: Make world problems from 4.9 to 5.1
> >
> > On Wednesday 26 November 2003 04:44 pm, Eric Crist wrote:
> > > Hey all,
> > >
> > > I've got a Compaq Presario laptop with everything working great,
> > > except my wifi card.  I've decided that I've been using 5.1 for a
> > > long
> > >
> > > time on my desktop without issue, so I want to upgrade my laptop.  I
> > >
> > > can cvsup the sources fine, but when I enter into /usr/src and type
> > > make world, I get an error about checking the kernel to see if it's
> > > fresh enough and it dumps the core and exits.  Is anyone else having
> > >
> > > this problem?  I have tried doing a cd /usr/src; rm -rf * to delete
> > > everything in the /usr/src directory and rm -rf the /usr/obj
> > > directory.  This has always worked for me in the past.
> > >
> > > Any enlightenment would be appreciated, even a point to the correct
> > > FM.
> >
> > There used to be a precise sequence that you had to follow to update
> > from 4.x to 5.x in UPDATING. Did you follow it? The last time I read
> > anything, a simple buildworld and etc. won't do it.
> >
> > Kent

-- 
Kent Stewart
Richland, WA

http://users.owt.com/kstewart/index.html



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200311262327.46751.kstewart>