Date: Fri, 07 May 2010 22:30:21 +0500 From: Perevalov Sergey <perevalov84@gmail.com> To: freebsd-net@freebsd.org Subject: [axe][ue0] Device send packets but any host in network can not receive any packet from it. Message-ID: <4BE44E2D.6060907@gmail.com>
next in thread | raw e-mail | index | archive | help
Hi guys. I am beginner in FreeBSD. And I got problem with my Gigabit usb to ethernet adapter with AX88178 chipset. It works in windows very well but doesn't work in FreeBSD 8.0. tcpdump shows log with received and sent packets, but any host in network doesn't receive them from it. I checked it with 2 FreeBSD hosts connected directly by cable. Can you, guys, advice to me something to fix or to find reason of this issue? I started thread on freebsd forums( http://forums.freebsd.org/showthread.php?t=13649 ) and also reported about problem ( http://www.freebsd.org/cgi/query-pr.cgi?pr=146153 ). Here some information: dmesg: ugen4.2: <vendor 0x0b95> at usbus4 axe0: <vendor 0x0b95 product 0x1780, rev 2.00/0.01, addr 2> on usbus4 axe0: PHYADDR 0xe0:0x02 miibus0: <MII bus> on axe0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 2 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ue0: <USB Ethernet> on axe0 ue0: Ethernet address: 00:0e:c6:88:09:4e usbconfig: laptop# usbconfig ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen4.2: <product 0x1780 vendor 0x0b95> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.2: <Optical Mouse Genius> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ifconfig: ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:0e:c6:88:09:4e inet 192.168.2.22 netmask 0xffffff00 broadcast 192.168.2.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active Thank you for you help! -- Regards, Sergey.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BE44E2D.6060907>