Date: Sun, 23 Aug 1998 16:59:00 -0300 (ADT) From: The Hermit Hacker <scrappy@hub.org> To: current@FreeBSD.ORG Subject: AVA-1505 card for CDR...system hang... Message-ID: <Pine.BSF.4.02.9808231651100.389-100000@thelab.hub.org>
next in thread | raw e-mail | index | archive | help
Morning...
The other day, I purchased an AVA-1505 SCSI card in order to move
my external CD-R to a seperate SCSI bus, because I was having problems
writing CDs. When the system boots, it recognizes the AVA and the CDR,
but as soon as I get to a login prompt, if I try to do a mount of a
known-to-work CD, it hangs and tells me that 'cd1 timed out', and just
hangs there indefinitely.
It *feels* like an IRQ conflict, except I can't find one looking
through both a boot and a boot -v. The boot -v included here is for a
system with just the NCR controller (boot drive(s)), video controller and
the AVA-1505 controller. The operating system is 3.0-CURRENT as of
yesterday, no CAM drivers.
Can someone suggestion something that I'm overlooking here? Or is
there a known problem with the 1505's that I missed?
Thanks...
Marc G. Fournier
Systems Administrator @ hub.org
primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Sat Aug 22 20:20:58 ADT 1998
root@thelab.hub.org:/usr/src/sys/compile/thelab
Calibrating clock(s) ... TSC clock: 149688012 Hz, i8254 clock: 1193168 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz cost 2530 ns
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 149690744 Hz cost 157 ns
CPU: Pentium/P54C (149.69-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x001ff000 - 0x07ffdfff, 132116480 bytes (32255 pages)
avail memory = 128253952 (125248K bytes)
Found BIOS32 Service Directory header at 0xf00f8440
Entry = 0xf7e90 (0xf00f7e90) Rev = 0 Len = 1
PCI BIOS entry at 0x7ec0
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000fc4e0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086)
Probing for devices on PCI bus 0:
found-> vendor=0x8086, dev=0x1250, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
chip0: <Intel 82439> rev 0x03 on pci0.0.0
found-> vendor=0x8086, dev=0x7000, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks
Extended BIOS: disabled
Lower BIOS: enabled
Coprocessor IRQ13: enabled
Mouse IRQ12: disabled
Interrupt Routing: A: IRQ12, B: disabled, C: disabled, D: disabled
MB0: disabled, MB1:
found-> vendor=0x8086, dev=0x7010, revid=0x00
class=01-01-80, hdrtype=0x00, mfdev=0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
found-> vendor=0x1002, dev=0x4758, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
map[0]: type 1, range 32, base fb000000, size 23
vga0: <ATI Mach64-GX graphics accelerator> rev 0x00 on pci0.9.0
found-> vendor=0x1000, dev=0x0001, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=12
map[0]: type 4, range 32, base 0000e000, size 8
map[1]: type 1, range 32, base fa800000, size 8
ncr0: <ncr 53c810 fast10 scsi> rev 0x02 int a irq 12 on pci0.12.0
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
ncr0 scanning for targets 0..6 (V2 pl24 96/12/14)
scbus0 at ncr0 bus 0
sd0 at scbus0 target 0 lun 0
sd0: <SEAGATE ST32151N 0284> type 0 fixed SCSI 2
sd0: Direct-Access
sd0: NCR quirks=0x2
sd0: 10.0 MB/s (100 ns, offset 8)
2049MB (4197405 512 byte sectors)
sd0: with 4177 cyls, 8 heads, and an average 125 sectors/track
sd1 at scbus0 target 1 lun 0
sd1: <QUANTUM LP240S GM240S01X 6.4> type 0 fixed SCSI 2
sd1: Direct-Access
sd1: NCR quirks=0x2
sd1: 10.0 MB/s (100 ns, offset 8)
234MB (479350 512 byte sectors)
sd1: with 1818 cyls, 4 heads, and an average 65 sectors/track
sd2 at scbus0 target 2 lun 0
sd2: <QUANTUM LPS340S 020B> type 0 fixed SCSI 2
sd2: Direct-Access
sd2: NCR quirks=0x2
sd2: 10.0 MB/s (100 ns, offset 8)
327MB (670506 512 byte sectors)
sd2: with 2337 cyls, 4 heads, and an average 71 sectors/track
cd0 at scbus0 target 3 lun 0
cd0: <SONY CD-ROM CDU625 1.0r> type 5 removable SCSI 2
cd0: CD-ROM
cd0: NCR quirks=0x2
cd0: 10.0 MB/s (100 ns, offset 8)
can't get the size
Probing for PnP devices:
Trying Read_Port at 203
CSN 1 Vendor ID: ADP1505 [0x05159004] Serial 0x45e5863c
Called nullpnp_probe with tag 0x00000001, type 0x05159004
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0065
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0: keyboard device ID: ab41
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: video mode:24
sc0: VGA registers in BIOS for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: VGA registers to be used for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: rows_offset:1
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
mss_probe: no address supplied, try default 0x530
mss_detect error, busy still set (0xff)
sb_probe: no address supplied, try defaults (0x220,0x240)
pcm0 not found
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
aic0 at 0x140-0x15f irq 10 on isa
scbus1 at aic0 bus 0
cd1 at scbus1 target 6 lun 0
cd1: <YAMAHA CRW2260 1.0f> type 5 removable SCSI 2
cd1: CD-ROM can't get the size
scd0 not found at 0x230
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 131319763 bytes/sec
bzero() bandwidth = 79308430 bytes/sec
imasks: bio c0081440, tty c003001a, net c0060000
BIOS Geometries:
0:03f0413f 0..1008=1009 cylinders, 0..65=66 heads, 1..63=63 sectors
1:03f6073b 0..1014=1015 cylinders, 0..7=8 heads, 1..59=59 sectors
2:03f60a3c 0..1014=1015 cylinders, 0..10=11 heads, 1..60=60 sectors
0 accounted for
Device configuration finished.
Intel Pentium F00F detected, installing workaround
bpf: tun0 attached
bpf: lo0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, logging disabled
Considering FFS root f/s.
changing root device to sd0s1a
sd0s1: type 0xa5, start 0, end = 4197404, size 4197405
sd0s1: C/H/S end 261/70/30 (558059) != end 4197404: invalid
WARNING: / was not properly dismounted.
sd1s1: type 0xa5, start 0, end = 479349, size 479350 : OK
sd2s1: type 0xa5, start 0, end = 670505, size 670506 : OK
sd2s1: type 0xa5, start 0, end = 670505, size 670506 : OK
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.02.9808231651100.389-100000>