Date: Tue, 6 Oct 2015 11:06:02 -0500 From: Eric van Gyzen <eric@vangyzen.net> To: Sean Kelly <smkelly@smkelly.org>, FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Cc: Jim Harris <jim.harris@gmail.com> Subject: Re: Dell NVMe issues Message-ID: <5613F16A.8010901@vangyzen.net> In-Reply-To: <BC5F191D-FEB2-4ADC-9D6B-240C80B2301C@smkelly.org> References: <BC5F191D-FEB2-4ADC-9D6B-240C80B2301C@smkelly.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/06/2015 10:18, Sean Kelly wrote: > Back in May, I posted about issues I was having with a Dell PE R630 with 4x800GB NVMe SSDs. I would get kernel panics due to the inability to assign all the interrupts because of https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=199321 <https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=199321>. Jim Harris helped fix this issue so I bought several more of these servers, Including ones with 4x1.6TB drives… > > while the new servers with 4x800GB drives still work, the ones with 4x1.6TB drives do not. When I do a > zpool create tank mirror nvd0 nvd1 mirror nvd2 nvd3 > the command never returns and the kernel logs: > nvme0: resetting controller > nvme0: controller ready did not become 0 within 2000 ms > > I’ve tried several different things trying to understand where the actual problem is. > WORKS: dd if=/dev/nvd0 of=/dev/null bs=1m > WORKS: dd if=/dev/zero of=/dev/nvd0 bs=1m > WORKS: newfs /dev/nvd0 > FAILS: zpool create tank mirror nvd[01] > FAILS: gpart add -t freebsd-zfs nvd[01] && zpool create tank mirror nvd[01]p1 > FAILS: gpart add -t freebsd-zfs -s 1400g nvd[01[ && zpool create tank nvd[01]p1 > WORKS: gpart add -t freebsd-zfs -s 800g nvd[01] && zpool create tank nvd[01]p1 > > NOTE: The above commands are more about getting the point across, not validity. I wiped the disk clean between gpart attempts and used GPT. > > So it seems like zpool works if I don’t cross past ~800GB. But other things like dd and newfs work. > > When I get the kernel messages about the controller resetting and then not responding, the NVMe subsystem hangs entirely. Since my boot disks are not NVMe, the system continues to work but no more NVMe stuff can be done. Further, attempting to reboot hangs and I have to do a power cycle. > > Any thoughts on what the deal may be here? > > 10.2-RELEASE-p5 > > nvme0@pci0:132:0:0: class=0x010802 card=0x1f971028 chip=0xa820144d rev=0x03 hdr=0x00 > vendor = 'Samsung Electronics Co Ltd' > class = mass storage > subclass = NVM Try this: sysctl vfs.zfs.vdev.trim_on_init=0 zpool create tank mirror nvd[01] Eric
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5613F16A.8010901>