Date: Tue, 13 Jan 2004 11:20:54 -0600 From: kitsune <kitsune@gmx.co.uk> To: Stefan Walter <sw@gegenunendlich.de> Cc: multimedia@freebsd.org Subject: Re: VIA KT400A and AGP/DRI? Message-ID: <20040113112054.0bc3aee4@vixen42.> In-Reply-To: <20040113152037.GA850@kyuzo.dunkelkammer.void> References: <20040113152037.GA850@kyuzo.dunkelkammer.void>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 13 Jan 2004 16:20:37 +0100 Stefan Walter <sw@gegenunendlich.de> wrote: > I just replaced an old mainboard with a new one with a VIA KT400A > chipset. Is it possible to get DRI working with that? It used to work > with the old board (different chipset), but I had to turn off DRI in my > X configuration for the new one, as it made X/the system freeze/hang > immediately. > > The full output of dmesg can be found at [1], the output of 'pciconf -l' > at [2]. If more info is needed, just tell me. > > Stefan > > [1]: http://www.gegenunendlich.de/stuff/kyuzo/dmesg_kyuzo > [2]: http://www.gegenunendlich.de/stuff/kyuzo/pciconf_kyuzo Well after looking at it, I really can't thing of any reason DRI would not work based on dmesg... it finds the agp and the drm, so as long as X is setup right, it should work. What I would be suspect of is X config. Not sure why, but if I set the agp speed higher than 2x, it would freeze, after I used opengl for a bit. I would try messing with the options for that card in the X config and see if any of those are suspect.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040113112054.0bc3aee4>