Date: Thu, 11 Dec 2003 23:10:21 +0100 From: Vino <info@nolimitweb.nl> To: freebsd-current@freebsd.org Subject: acpi_compaq_evo_n600C_errors Message-ID: <6.0.1.1.0.20031211230304.03781a70@195.234.173.64>
next in thread | raw e-mail | index | archive | help
Hi,
did a clean install
got these errors on compaq_evo_n600C notebook (latest bios)
any suggestions?
ACPI-1287: *** Error: Method execution failed [\\_SB_.C03E.C04C] (Node
0xc16b1580), AE_AML_BUFFER_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.C03E.C050] (Node
0xc16b1560), AE_AML_BUFFER_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.C03E._CRS] (Node
0xc16b1540), AE_AML_BUFFER_LIMIT
ACPI-0226: *** Error: Return object type is incorrect
[\\_SB_.C03E._CRS] (Node 0xc16b1540), AE_TYPE
can't fetch resources for \\_SB_.C03E - AE_TYPE
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RC1 #0: Sun Dec 7 22:15:14 GMT 2003
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2c000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2c1f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz (730.90-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268238848 (255 MB)
avail memory = 250920960 (239 MB)
Pentium Pro MTRR support enabled
ACPI-0264: *** Error: Looking up [\\_PR_.C000] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: , AE_NOT_FOUND
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ CPQ0030 > on motherboard
pcibios: BIOS version 2.10
ACPI-0438: *** Error: Looking up [\\_PR_.C000] in namespace, AE_NOT_FOUND
SearchNode 0xc2d57e60 StartNode 0xc2d57e60 ReturnNode 0
ACPI-1287: *** Error: , AE_NOT_FOUND
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
ACPI-1287: *** Error: Method execution failed [\\_SB_.C03E.C04C] (Node
0xc16b1580), AE_AML_BUFFER_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.C03E.C050] (Node
0xc16b1560), AE_AML_BUFFER_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.C03E._CRS] (Node
0xc16b1540), AE_AML_BUFFER_LIMIT
ACPI-0226: *** Error: Return object type is incorrect
[\\_SB_.C03E._CRS] (Node 0xc16b1540), AE_TYPE
can't fetch resources for \\_SB_.C03E - AE_TYPE
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ACPI-0438: *** Error: Looking up [\\_PR_.C000] in namespace, AE_NOT_FOUND
SearchNode 0xc2d57e60 StartNode 0xc2d57e60 ReturnNode 0
ACPI-1287: *** Error: , AE_NOT_FOUND
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 11
pcib0: slot 29 INTC is routed to irq 11
pcib0: slot 31 INTA is routed to irq 11
agp0: <Intel 82830 host to AGP bridge> mem 0x60000000-0x6fffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x4000-0x401f
irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x4020-0x403f
irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.b4, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x4040-0x405f
irq 11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 3 INTA is routed to irq 11
pcib2: slot 3 INTA is routed to irq 11
pcib2: slot 4 INTA is routed to irq 11
pcib2: slot 8 INTA is routed to irq 11
pcib2: slot 9 INTA is routed to irq 11
cbb0: <TI1420 PCI-CardBus Bridge> mem 0x40000000-0x40000fff irq 11 at
device 3.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb1: <TI1420 PCI-CardBus Bridge> mem 0x40080000-0x40080fff irq 11 at
device 3.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
pci2: <simple comms> at device 4.0 (no driver attached)
fxp0: <Intel 82801CAM (ICH3) Pro/100 VM Ethernet> port 0x2800-0x283f mem
0x40100000-0x40100fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:02:a5:b6:3d:32
miibus0: <MII bus> on fxp0
inphy0: <i82562EM 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <multimedia, audio> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port
0x4060-0x406f,0-0x3,0-0x7,0-0x3,0-0x7 irq 11 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio1 port 0x100-0x107,0x3e8-0x3ef irq 3 drq 1 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 0xd0000-0xd17ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 730902312 Hz quality 800
Timecounters tick every 10.000 msec
system power profile changed to 'economy'
GEOM: create disk ad0 dp=0xc2e69560
ad0: 19077MB <IC25N020ATCS04-0> [38760/16/63] at ata0-master UDMA100
acd0: CDROM <CD-224E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
ACPI-0438: *** Error: Looking up [\\_PR_.C000] in namespace, AE_NOT_FOUND
SearchNode 0xc2d57e60 StartNode 0xc2d57e60 ReturnNode 0
ACPI-1287: *** Error: , AE_NOT_FOUND
thanks,
Vino
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.1.1.0.20031211230304.03781a70>