Date: 01 Dec 2002 20:29:54 -0600 From: Bob Van Valzah <Bob@VanValzah.Com> To: "M. Warner Losh" <imp@bsdimp.com> Cc: Current FreeBSD <FreeBSD-Current@FreeBSD.ORG>, Mobile FreeBSD <FreeBSD-Mobile@FreeBSD.ORG> Subject: Re: DP2 + Thinkpad 660X = PC Card card activation failed Message-ID: <1038796195.375.7.camel@OutBound> In-Reply-To: <20021130.221652.13461823.imp@bsdimp.com> References: <1038714888.365.47.camel@OutBound> <20021130.221652.13461823.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 2002-11-30 at 23:16, M. Warner Losh wrote: > Try adding hw.pccard.cis_debug=1 to /boot/loader.conf and let me know > the results. Warner, I knew you'd know what to try next! Here's what's new in dmesg apparently as a result of the cis_debug flag (full dmesg output follows the signature): cis mem map d1b00000 pccard0: CIS tuple chain: CISTPL_END ff cis mem map d1b00000 CISTPL_LINKTARGET expected, code ff observed It looks to me like a null tuple chain was found where a link target was expected. But I have no clue how to interpret this in context. All advice appreciated! Bob Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-DP2 #1: Sat Nov 16 13:38:33 GMT 2002 root@tomcat.bmah.org:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0679000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06790a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 498274185 Hz CPU: Pentium III/Pentium III Xeon/Celeron (498.27-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268238848 (255 MB) avail memory = 253636608 (241 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP600X > on motherboard Using $PIR table, 6 entries at 0xc00f9d70 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz ACPI-0351: *** Error: Could not install PciConfig handler for PCI0, AE_ALREADY_EXISTS acpi_timer0: <24-bit timer at 3.579545MHz> port 0xef08-0xef0b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_tz1: <thermal zone> on acpi0 acpi_tz2: <thermal zone> on acpi0 acpi_tz3: <thermal zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.3 \_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0 \_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.1 \_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.0 \_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.5.0 \_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0 ---- before setting priority for links ------------ \_SB_.LNKD: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660 references: 1 priority: 0 \_SB_.LNKA: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660 references: 2 priority: 0 \_SB_.LNKB: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660 references: 2 priority: 0 \_SB_.LNKC: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \_SB_.LNKA: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660 references: 2 priority: 5865 \_SB_.LNKB: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660 references: 2 priority: 5865 \_SB_.LNKD: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660 references: 1 priority: 2932 \_SB_.LNKC: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660 references: 1 priority: 2932 ---- after fixup boot-disabled links -------------- \_SB_.LNKA: interrupts: 11 10 9 5 12 7 6 4 3 15 14 penalty: 660 660 660 660 1660 1660 1660 1660 1660 10660 10660 references: 2 priority: 5865 \_SB_.LNKB: interrupts: 11 10 9 5 12 7 6 4 3 15 14 penalty: 660 660 660 660 1660 1660 1660 1660 1660 10660 10660 references: 2 priority: 5865 \_SB_.LNKD: interrupts: 11 10 9 5 12 7 6 4 3 15 14 penalty: 660 660 660 660 1660 1660 1660 1660 1660 10660 10660 references: 1 priority: 2932 \_SB_.LNKC: interrupts: 11 10 9 5 12 7 6 4 3 15 14 penalty: 660 660 660 660 1660 1660 1660 1660 1660 10660 10660 references: 1 priority: 2932 ---- arbitrated configuration --------------------- \_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.3 \_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0 \_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.1 \_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.0 \_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.5.0 \_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x40000000-0x43ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 ---- initial configuration ------------------------ \_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.0 \_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.1 ---- before setting priority for links ------------ \_SB_.LNKA: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1880 1880 880 1880 1880 880 880 880 1880 10880 10880 references: 3 priority: 5865 \_SB_.LNKB: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1880 1880 880 1880 1880 880 880 880 1880 10880 10880 references: 3 priority: 5865 \_SB_.LNKD: interrupts: 11 10 9 5 12 7 6 4 3 15 14 penalty: 880 880 880 880 1880 1880 1880 1880 1880 10880 10880 references: 1 priority: 2932 \_SB_.LNKC: interrupts: 11 10 9 5 12 7 6 4 3 15 14 penalty: 880 880 880 880 1880 1880 1880 1880 1880 10880 10880 references: 1 priority: 2932 ---- before fixup boot-disabled links ------------- \_SB_.LNKA: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1880 1880 880 1880 1880 880 880 880 1880 10880 10880 references: 3 priority: 9458 \_SB_.LNKB: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1880 1880 880 1880 1880 880 880 880 1880 10880 10880 references: 3 priority: 9458 \_SB_.LNKD: interrupts: 11 10 9 5 12 7 6 4 3 15 14 penalty: 880 880 880 880 1880 1880 1880 1880 1880 10880 10880 references: 1 priority: 3152 \_SB_.LNKC: interrupts: 11 10 9 5 12 7 6 4 3 15 14 penalty: 880 880 880 880 1880 1880 1880 1880 1880 10880 10880 references: 1 priority: 3152 ---- after fixup boot-disabled links -------------- \_SB_.LNKA: interrupts: 11 10 9 5 12 7 6 4 3 15 14 penalty: 880 880 880 880 1880 1880 1880 1880 1880 10880 10880 references: 3 priority: 9458 \_SB_.LNKB: interrupts: 11 10 9 5 12 7 6 4 3 15 14 penalty: 880 880 880 880 1880 1880 1880 1880 1880 10880 10880 references: 3 priority: 9458 \_SB_.LNKD: interrupts: 5 9 10 11 3 4 6 7 12 14 15 penalty: 880 880 880 880 1880 1880 1880 1880 1880 10880 10880 references: 1 priority: 3152 \_SB_.LNKC: interrupts: 5 9 10 11 3 4 6 7 12 14 15 penalty: 880 880 880 880 1880 1880 1880 1880 1880 10880 10880 references: 1 priority: 3152 ---- arbitrated configuration --------------------- \_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.0 \_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.1 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at device 2.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at device 2.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci0: <simple comms> at device 3.0 (no driver attached) pci0: <multimedia, audio> at device 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4000-0x401f irq 11 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x3bc-0x3c3 irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% cis mem map d1b00000 pccard0: CIS tuple chain: CISTPL_END ff cis mem map d1b00000 CISTPL_LINKTARGET expected, code ff observed pccard0: Card has no functions! cbb0: PC Card card activation failed ad0: 11509MB <IBM-DARA-212000> [24944/15/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s1a To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1038796195.375.7.camel>