Date: Mon, 25 Apr 2005 18:22:40 +0200 From: Mark Huizer <freebsd+stable@dohd.org> To: stable@freebsd.org Subject: fxp0: device timeout Message-ID: <20050425162240.GA24146@eeyore.local.dohd.org>
next in thread | raw e-mail | index | archive | help
--yrj/dFKFPuw6o+aM
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
My server in the attic was recently reinstalled from scratch with
FreeBSD 5.stable (actually: RC2, and now upgraded to 5-stable), see the
attached dmesg.boot for the dmesg info.
This machine in the exact hardware configuration was running fine in its
6-current days. The reason for 'down'grading was the fact that overtime
it seems that a subtle filesystem problem arose, that lead to random
crashes (well, random... take a lot of vm activity and at some point
vnlru would lead to a kernel panic), but the network was perfectly fine.
Now, with the 5.x install, I have regular problems with fxp0.
In /var/log/messages and dmesg I get this:
(The last line comes from ifconfig fxp0 link0, which I added yesterday
to see if it would solve problems, the same symptoms occur without that
option)
Apr 25 18:15:08 eeyore kernel: fxp0: device timeout
Apr 25 18:15:08 eeyore kernel: fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 0
The symptoms:
* network freezes for 30 seconds or something like that, after a while
pings start to work again and everything moves on.
When:
* combinations of network activity and/or disk activity. Starting bacula
will guarantee device timeouts, as will browsing from a workstation combined
with e.g. using a samba share
The interface:
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xe000-0xe01f mem 0xe3000000-0xe30fffff,0xe3101000-0xe3101fff irq 5 at device 17.0 on pci0
miibus1: <MII bus> on fxp0
fxp0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::208:c7ff:fe25:7560%fxp0 prefixlen 64 scopeid 0x2
ether 00:50:da:3d:d7:f6
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
There are 2 'special' things with this interface:
* the mac address is changed from /etc/start_if.fxp0
* it is used with VLAN's (802.1q tagging)
I looked in the mail archives, and of course it is clearly an interrupt
problem. I did the usual stuff: put the card in different PCI slots,
force it to different IRQ in the BIOS, but still no improvement.
Furthermore I don't believe that hardware should change that much just
by reinstalling FreeBSD, so I tend to believe that something is
different between 5.x and 6.x.
Does anyone recognize these symptoms and have a nice solution for me?
Or if people decide I should PR this: what kind of info would make
debugging easy? vmstat 1 info would take a little work to collect for
these kind of outages, but I can do some scripting to fix that of course
:-)
Greetings,
Mark
--
Nice testing in little China...
--yrj/dFKFPuw6o+aM
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #1: Thu Apr 21 02:25:25 CEST 2005
xaa@eeyore.local.dohd.org:/usr/obj/usr/src/sys/eeyore
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP (1660.52-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 515637248 (491 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 10 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.4 (no driver attached)
sym0: <810a> port 0xd800-0xd8ff mem 0xe3100000-0xe31000ff irq 11 at device 15.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using LOAD/STORE-based firmware.
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xe3102000-0xe310207f irq 10 at device 16.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:75:c4:f4:43
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xe000-0xe01f mem 0xe3000000-0xe30fffff,0xe3101000-0xe3101fff irq 5 at device 17.0 on pci0
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:08:c7:25:75:60
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe3103000-0xe31030ff irq 12 at device 18.0 on pci0
miibus2: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus2
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:fc:0b:28:ec
pci0: <multimedia, audio> at device 19.0 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <ISA Option ROMs> at iomem 0xd1000-0xd17ff,0xd0000-0xd07ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1660518050 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled
ad0: 38166MB <WDC WD400EB-11CPF0/06.04G06> [77545/16/63] at ata0-master UDMA100
acd0: CDROM <ATAPI-CD ROM-DRIVE-56MAX/VER 56JA> at ata1-slave PIO4
Waiting 10 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
sa0 at sym0 bus 0 target 0 lun 0
sa0: <HP C1537A L708> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
Mounting root from ufs:/dev/ad0s1a
--yrj/dFKFPuw6o+aM--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050425162240.GA24146>