Date: Wed, 1 Mar 2006 21:52:51 +0100 (GMT+01:00) From: "kirk.auz@tin.it" <kirk.auz@tin.it> To: <freebsd-multimedia@freebsd.org> Subject: snd_ich && IBM Z60T Message-ID: <109b795a42f.kirk.auz@tin.it>
next in thread | raw e-mail | index | archive | help
------=_Part_39530_18031985.1141246371065
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Hi,
on FreeBSD 7 current (update from CTM yesterday) i have this
problem:
when i load snd_ich the driver not attach the sound card
(Intel High Definition Audio).
I have the same problem with the FreeBSD
6 (update yesterday from CTM).
Thanks many, I hope someone me aids even
if it is not a great problem. In these months I have listened music
with my I-POD..... :)
Also I have tried to change ID on
/usr/src/sys/dev/sound/pci/ich.c:
#define INTEL_82801FB 0x266e >>>
#define INTEL_82801FB 0x2668
But when I load snd_ich:
pcm0: <Intel
ICH6 (82801FB)> mem 0xa0000000-0xa0003fff irq 16 at device 27.0 on
pci0
pcm0: unable to map IO port space
device_attach: pcm0 attach returned 6
I have read also the manpage of "sound" and have tried: /boot/device.
hints
hint.pcm.0.at="isa"
hint.pcm.0.irq="5"
hint.pcm.0.
drq="1"
hint.pcm.0.flags="0x0"
But without happening
1000 THANKS
@ FREEBSD TEAM FOR THIS OPERATING SYSTEM !!!!
In attached there are
DMESG (boot -v) and PCICONF -LV
Laptop:
Lenovo IBM Z60T Intel Pentium-
M 2.0GHz; 512MB RAM; 80GB HD; ICH6 (or ICH7); i915GM.
------=_Part_39530_18031985.1141246371065
Content-Type: APPLICATION/OCTET-STREAM; name=pciconf-lv
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=pciconf-lv; size=4774
hostb0@pci0:0:0: class=0x060000 card=0x05751014 chip=0x25908086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82915PM/GM/GMS, 82910GML Host Bridge'
class = bridge
subclass = HOST-PCI
agp0@pci0:2:0: class=0x030000 card=0x058c1014 chip=0x25928086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82915GM/GMS, 82910GML Integrated Graphics Device'
class = display
subclass = VGA
none0@pci0:2:1: class=0x038000 card=0x058c1014 chip=0x27928086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82915GM/GMS,82910GML Mobile Express Family Graphics Controller (??)'
class = display
none1@pci0:27:0: class=0x040300 card=0x05b71014 chip=0x26688086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW Intel High DefiNition Audio Controller'
class = multimedia
pcib1@pci0:28:0: class=0x060400 card=0x00000040 chip=0x26608086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW PCI Express Port 1'
class = bridge
subclass = PCI-PCI
pcib2@pci0:28:1: class=0x060400 card=0x00000040 chip=0x26628086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW PCI Express Port 2'
class = bridge
subclass = PCI-PCI
pcib3@pci0:28:2: class=0x060400 card=0x00000040 chip=0x26648086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW PCI Express Port 3'
class = bridge
subclass = PCI-PCI
pcib4@pci0:28:3: class=0x060400 card=0x00000040 chip=0x26668086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW PCI Express Port 4'
class = bridge
subclass = PCI-PCI
uhci0@pci0:29:0: class=0x0c0300 card=0x05651014 chip=0x26588086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
uhci1@pci0:29:1: class=0x0c0300 card=0x05651014 chip=0x26598086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
uhci2@pci0:29:2: class=0x0c0300 card=0x05651014 chip=0x265a8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
uhci3@pci0:29:3: class=0x0c0300 card=0x05651014 chip=0x265b8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
ehci0@pci0:29:7: class=0x0c0320 card=0x05661014 chip=0x265c8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB 2.0 EHCI Controller'
class = serial bus
subclass = USB
pcib5@pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xd3 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x05681014 chip=0x26418086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FBM ICH6M LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:2: class=0x010180 card=0x056a1014 chip=0x26538086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FBM ICH6M SATA Controller'
class = mass storage
subclass = ATA
none2@pci0:31:3: class=0x0c0500 card=0x056b1014 chip=0x266a8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW SMBus Controller'
class = serial bus
subclass = SMBus
bge0@pci2:0:0: class=0x020000 card=0x05771014 chip=0x167d14e4 rev=0x11 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5750A1M NetXtreme Gigabit Ethernet PCI Express'
class = network
subclass = ethernet
ath0@pci19:0:0: class=0x020000 card=0x058a1014 chip=0x1014168c rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device = '11a/b/g Wireless LAN Mini PCI Adapter'
class = network
subclass = ethernet
cbb0@pci20:0:0: class=0x060700 card=0x056c1014 chip=0x04761180 rev=0xb3 hdr=0x02
vendor = 'Ricoh Co Ltd'
device = 'RL5c476 CardBus Controller'
class = bridge
subclass = PCI-CardBus
fwohci0@pci20:0:1: class=0x0c0010 card=0x05111014 chip=0x05521180 rev=0x08 hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'RL5c552 IEEE-1394 Controller'
class = serial bus
subclass = FireWire
none3@pci20:0:2: class=0x080500 card=0x05561014 chip=0x08221180 rev=0x17 hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'SD Bus Host Adapter'
class = base peripheral
------=_Part_39530_18031985.1141246371065
Content-Type: APPLICATION/OCTET-STREAM; name=dmesg
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=dmesg; size=30649
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
nfslock: pseudo-device
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00
00 01 7b 00 00 01 3d 01 00 01 4f 01 00 01 7d 01
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 18 mode(s) found
VESA: v3.0, 7872k memory, flags:0x1, mode table:0xc0801340 (1000040)
VESA: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
VESA: Intel Corporation Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0
random: <entropy source, Software, Yarrow>
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-77> on motherboard
acpi0: [MPSAFE]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa04
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086)
pcibios: BIOS version 2.10
Found $PIR table, 14 entries at 0xc00fdeb0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 27 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 28 A 0x68 3 4 5 6 7 9 10 11 12
embedded 0 28 B 0x69 3 4 5 6 7 9 10 11 12
embedded 0 28 C 0x6a 3 4 5 6 7 9 10 11 12
embedded 0 28 D 0x6b 3 4 5 6 7 9 10 11 12
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 29 B 0x61 3 4 5 6 7 9 10 11 12
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12
embedded 0 29 D 0x63 3 4 5 6 7 9 10 11 12
embedded 0 30 A 0x6a 3 4 5 6 7 9 10 11 12
embedded 0 30 B 0x6b 3 4 5 6 7 9 10 11 12
embedded 0 31 A 0x6b 3 4 5 6 7 9 10 11 12
embedded 0 31 B 0x60 3 4 5 6 7 9 10 11 12
embedded 20 0 A 0x60 3 4 5 6 7 9 10 11 12
embedded 20 0 B 0x61 3 4 5 6 7 9 10 11 12
embedded 20 0 C 0x62 3 4 5 6 7 9 10 11 12
slot 1 20 2 A 0x69 3 4 5 6 7 9 10 11 12
slot 1 20 2 B 0x6a 3 4 5 6 7 9 10 11 12
embedded 20 8 A 0x68 3 4 5 6 7 9 10 11 12
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 29 func 7
acpi0: Power Button (fixed)
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 4 N 0 3 4 5 6 7 9 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 4 N 0 3 4 5 6 7 9 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 6 N 0 3 4 5 6 7 9 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 6 N 0 3 4 5 6 7 9 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 6 7 9 10 11
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 6 7 9 10 11
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
ACPI timer: 1/1 1/1 1/1 1/1 0/3 1/1 1/1 1/2 1/1 1/1 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2590, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2592, revid=0x03
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base a0080000, size 19, enabled
map[14]: type 4, range 32, base 00001800, size 3, enabled
map[18]: type 3, range 32, base c0000000, size 28, enabled
map[1c]: type 1, range 32, base a0040000, size 18, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2792, revid=0x03
bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base 00000000, size 19, memory disabled
found-> vendor=0x8086, dev=0x2668, revid=0x03
bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base a0000000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2660, revid=0x03
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2662, revid=0x03
bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2664, revid=0x03
bus=0, slot=28, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2666, revid=0x03
bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2658, revid=0x03
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2659, revid=0x03
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=4
map[20]: type 4, range 32, base 00001840, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x265a, revid=0x03
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type 4, range 32, base 00001860, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x265b, revid=0x03
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=6
map[20]: type 4, range 32, base 00001880, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x265c, revid=0x03
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=6
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base a0004000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2448, revid=0xd3
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2641, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2653, revid=0x03
bus=0, slot=31, func=2
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001810, size 4, enabled
found-> vendor=0x8086, dev=0x266a, revid=0x03
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 000018a0, size 5, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 23
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xa0080000-0xa00fffff,0xc0000000-0xcfffffff,0xa0040000-0xa007ffff irq 16 at device 2.0 on pci0
agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xa0080000
agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xa0080000
agp0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xa0040000
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <display> at device 2.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xa0100000-0xa01fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib1
pci2: physical bus=2
found-> vendor=0x14e4, dev=0x167d, revid=0x11
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0102, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base a0100000, size 16, enabled
pcib1: (null) requested memory range 0xa0100000-0xa010ffff: good
pcib1: matched entry for 2.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
bge0: <Broadcom BCM5751M Gigabit Ethernet, ASIC rev. 0x4101> mem 0xa0100000-0xa010ffff irq 16 at device 0.0 on pci2
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xa0100000
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:c0:9f:f0:4c:1e
bge0: [MPSAFE]
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pcib2: secondary bus 3
pcib2: subordinate bus 10
pcib2: I/O decode 0x2000-0x3fff
pcib2: memory decode 0xa2000000-0xa3ffffff
pcib2: prefetched decode 0xd0000000-0xd00fffff
pci3: <ACPI PCI bus> on pcib2
pci3: physical bus=3
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pcib3: secondary bus 11
pcib3: subordinate bus 18
pcib3: I/O decode 0x4000-0x5fff
pcib3: memory decode 0xa4000000-0xa5ffffff
pcib3: prefetched decode 0xb0100000-0xb01fffff
pci11: <ACPI PCI bus> on pcib3
pci11: physical bus=11
pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pcib4: secondary bus 19
pcib4: subordinate bus 19
pcib4: I/O decode 0x6000-0x7fff
pcib4: memory decode 0xa6000000-0xa7ffffff
pcib4: prefetched decode 0xd0100000-0xd01fffff
pci19: <ACPI PCI bus> on pcib4
pci19: physical bus=19
found-> vendor=0x168c, dev=0x1014, revid=0x01
bus=19, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0103, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type 1, range 64, base a7f00000, size 16, enabled
pcib4: (null) requested memory range 0xa7f00000-0xa7f0ffff: good
pcib4: matched entry for 19.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 19
ath0: <Atheros 5212> mem 0xa7f00000-0xa7f0ffff irq 19 at device 0.0 on pci19
ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xa7f00000
ath0: [MPSAFE]
ath0: bpf attached
ath0: Ethernet address: 00:14:a4:7d:66:12
ath0: bpf attached
ath0: bpf attached
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1820-0x183f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1840-0x185f irq 17 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1880-0x189f irq 19 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xa0004000-0xa00043ff irq 19 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xa0004000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5: secondary bus 20
pcib5: subordinate bus 23
pcib5: I/O decode 0x8000-0xbfff
pcib5: memory decode 0xa8000000-0xb00fffff
pcib5: prefetched decode 0xd8000000-0xdfffffff
pcib5: Subtractively decoded bridge.
pci20: <ACPI PCI bus> on pcib5
pci20: physical bus=20
found-> vendor=0x1180, dev=0x0476, revid=0xb3
bus=20, slot=0, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0000000, size 12, enabled
pcib5: (null) requested memory range 0xb0000000-0xb0000fff: good
pcib5: matched entry for 20.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x1180, dev=0x0552, revid=0x08
bus=20, slot=0, func=1
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=b, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0001000, size 11, enabled
pcib5: (null) requested memory range 0xb0001000-0xb00017ff: good
pcib5: matched entry for 20.0.INTB
pcib5: slot 0 INTB hardwired to IRQ 17
found-> vendor=0x1180, dev=0x0822, revid=0x17
bus=20, slot=0, func=2
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0001800, size 8, enabled
pcib5: (null) requested memory range 0xb0001800-0xb00018ff: good
pcib5: matched entry for 20.0.INTC
pcib5: slot 0 INTC hardwired to IRQ 18
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 16 at device 0.0 on pci20
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100107 0x060700b3 0x00824000
0x10: 0xb0000000 0x020000dc 0x20171514 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110
0x40: 0x056c1014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x30a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000008 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0xb2000000 0x00003000 0x00000000
0xc0: 0x056c1014 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: <Ricoh R5C552> mem 0xb0001000-0xb00017ff irq 17 at device 0.1 on pci20
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb0001000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:00:20:20:39:db
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci20: <base peripheral> at device 0.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_ec0: info: new max delay is 50 us
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0800-0xd17ff,0xdc000-0xdffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x8e79 0x8e79 0x8e79 0x8e79
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x8e79 0x8e79 0x8e79 0x8e79
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 66500254 hz
Timecounter "TSC" frequency 1995014116 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
battery0: battery initialization start
acpi_acad0: acline initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acpi_ec0: info: new max delay is 70 us
acpi_ec0: info: new max delay is 110 us
battery0: battery initialization done, tried 1 times
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ad0: 76319MB <TOSHIBA MK8032GSX AS113E> at ata0-master SATA150
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: <MATSHITADVD-RAM UJ-832/1.00> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
pci0: driver added
found-> vendor=0x8086, dev=0x2792, revid=0x03
bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pci0:2:1: reprobing on driver added
found-> vendor=0x8086, dev=0x2668, revid=0x03
bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:27:0: reprobing on driver added
found-> vendor=0x8086, dev=0x266a, revid=0x03
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=23
pci0:31:3: reprobing on driver added
pci2: driver added
pci3: driver added
pci11: driver added
pci19: driver added
pci20: driver added
found-> vendor=0x1180, dev=0x0822, revid=0x17
bus=20, slot=0, func=2
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
powerspec 2 supports D0 D1 D2 D3 current D0
pci20:0:2: reprobing on driver added
------=_Part_39530_18031985.1141246371065--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?109b795a42f.kirk.auz>