Date: Wed, 29 Sep 2004 10:27:30 +0200 From: Marc "UBM" Bocklet <ubm@u-boot-man.de> To: current@freebsd.org Subject: Hard freezes in -BETA4 and -BETA6 Message-ID: <20040929102730.0ca7337f.ubm@u-boot-man.de>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hiho! :-)
Since cvsupping to -BETA4, I've been getting hard freezes after a period
of usually 1-3 days. No debugger, no serial connection, nothing.
Only symptom that I can see is that the light on my switch where the
cable to my fxp nic is plugged in flashes constantly, as if there were
lots of traffic.
I've cvsupped again yesterday, hoping that the problem might have been
fixed, but it's still there, just encountered another freeze during the
night.
FreeBSD greatsheep 5.3-BETA6 FreeBSD 5.3-BETA6 #8: Tue Sep 28 13:25:50
CEST 2004 root@greatsheep:/usr/obj/usr/src/sys/SUBMARINE_SMP i386
dmesg and kernel config are attached.
Just an idea, might generating a NMI via my ISA-slot enable me to break
into the debugger?
And is there any danger for my mainboard? :-)
Bye
Marc
--
"A sudden blow: the great wings beating still
Above the staggering girl, her thighs caressed
By the dark webs, her nape caught in his bill,
He holds her helpless breast upon his breast."
W.B. Yeats, Lena and the Swan
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA6 #8: Tue Sep 28 13:25:50 CEST 2004
root@greatsheep:/usr/obj/usr/src/sys/SUBMARINE_SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (451.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536739840 (511 MB)
avail memory = 515563520 (491 MB)
ACPI APIC Table: <OEMTYN OEMTYNTB>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <OEMTYN OEMTYNTB> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu1: Failed to attach throttling P_CNT
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443GX host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 19 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 440
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 400
sym0: <896> port 0xe400-0xe4ff mem 0xfebe0000-0xfebe1fff,0xfebe8000-0xfebe83ff irq 17 at device 11.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: [GIANT-LOCKED]
sym1: <896> port 0xe800-0xe8ff mem 0xfebf0000-0xfebf1fff,0xfebf8000-0xfebf83ff irq 18 at device 11.1 on pci0
sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: [GIANT-LOCKED]
pcm0: <AudioPCI ES1373-8> port 0xef00-0xef3f irq 18 at device 12.0 on pci0
pcm0: <Cirrus Logic CS4297 AC97 Codec>
pcm0: [GIANT-LOCKED]
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xee80-0xeebf mem 0xfea00000-0xfeafffff,0xfebdf000-0xfebdffff irq 19 at device 13.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:e0:81:10:e4:49
pci0: <display, VGA> at device 14.0 (no driver attached)
xl0: <3Com 3c905B-FX/SC Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebdef80-0xfebdefff irq 16 at device 16.0 on pci0
xl0: Ethernet address: 00:50:da:26:69:30
acx0: <Texas Instruments (TI) 802.11b+ 22Mbps Wireless Adapter> port 0xef40-0xef5f mem 0xfebc0000-0xfebcffff,0xfebdd000-0xfebddfff irq 17 at device 17.0 on pci0
acx0: Ethernet address: 00:03:2f:09:ad:91
acx0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
acx0: 802.11 address: 00:03:2f:09:ad:91
acx0: Eeprom Rev 4 Domain ETSI Europe (1-13), Firmware Rev 1.9.8.b
acx0: Radio Type 0x11, Antenna 0x00, CCA Mode 0x0d, ED Threshold 0x70
acx0: (c) http://wlan.kewl.org/ 2003-2004
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xe080-0xe0ff mem 0xfebdef00-0xfebdef7f irq 18 at device 18.0 on pci0
miibus1: <MII bus> on xl1
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: Ethernet address: 00:01:02:b3:32:bc
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xcc000-0xcc7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sbc0: <Creative SB16/SB32> at port 0x388-0x38b,0x330-0x331,0x220-0x22f irq 5 drq 5,1 on isa0
sbc0: [GIANT-LOCKED]
pcm1: <SB16 DSP 4.13> on sbc0
pcm1: [GIANT-LOCKED]
ata2: <Generic ESDI/IDE/ATA controller> at port 0x36e-0x36f,0x168-0x16f irq 10 on isa0
Timecounters tick every 1.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad2: 8056MB <ST38421A/8.01> [16368/16/63] at ata1-master UDMA33
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
Interrupt storm detected on "irq9: intpm0"; throttling interrupt source
SMP: AP CPU #1 Launched!
da0 at sym1 bus 0 target 0 lun 0
da0: <FUJITSU MAG3182LC 5210> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 17429MB (35694860 512 byte sectors: 255H 63S/T 2221C)
Mounting root from ufs:/dev/ad2s1a
WARNING: / was not properly dismounted
WARNING: /stuff was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
[-- Attachment #3 --]
machine i386
cpu I686_CPU
ident SUBMARINE_SMP
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
#options SCHED_ULE # ULE scheduler
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.
# Debugging for use in -current
options KDB # Enable kernel debugger support.
options DDB # Support DDB.
options GDB # Support remote GDB.
#options INVARIANTS # Enable calls of extra sanity checking
#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
#options WITNESS # Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
# Bus support. Do not remove isa, even if you have no isa slots
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
#device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
### custom options for SUBMARINE_SMP ###
# sound devices
device sound
device snd_sbc
device "snd_sb16"
## networking options ##
# pf
device pf
device pflog
device pfsync
# altq
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_CDNR
options ALTQ_PRIQ
options ALTQ_NOPCC
options ALTQ_DEBUG
# rudimentary protection
options IPSTEALTH
options TCP_DROP_SYNFIN
# reasonable hz level
options HZ=2000
## set console resolution to 800x600, 1024x768 awaits!! ##
# VESA support
options VESA
# raster display support for 800x600 resolution
options SC_PIXEL_MODE
# support for INTEL PIIX4 SMBus
device smbus
device intpm
device smb
# enable device polling
#options DEVICE_POLLING
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040929102730.0ca7337f.ubm>