Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 20 Feb 2004 00:28:46 -0600
From:      "Neil Camara" <neil-on-mobile@restricted.dyndns.org>
To:        "Neil Camara" <neil-on-mobile@restricted.dyndns.org>
Cc:        freebsd-mobile@freebsd.org
Subject:   Re: wi0 wi_seek timeout
Message-ID:  <20040220062846.2504.qmail@restricted.dyndns.org>
In-Reply-To: <20040220061938.1848.qmail@restricted.dyndns.org> 
References:  <20040219035058.7296.qmail@restricted.dyndns.org> <c12lr0$ud0$1@sea.gmane.org> <20040219222922.86865.qmail@restricted.dyndns.org> <200402191959.55688.jesse@wingnet.net> <20040220061938.1848.qmail@restricted.dyndns.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Here is an additional logs found few minutes earlier in /var/log/messages. 

Feb 20 00:00:16 buko /kernel: wi0: timeout in wi_seek to 14c/0; last status 
810b
Feb 20 00:00:16 buko /kernel: wi0: timeout in wi_seek to 14c/3c; last status 
810b
Feb 20 00:00:16 buko /kernel: wi0: timeout in wi_cmd 0x010b; event status 
0x0000
Feb 20 00:00:16 buko /kernel: wi0: xmit failed
Feb 20 00:00:17 buko /kernel: wi0: timeout in wi_seek to 14c/0; last status 
810b
Feb 20 00:00:17 buko /kernel: wi0: wi_cmd: busy bit won't clear.
Feb 20 00:00:17 buko /kernel: wi0: xmit failed
Feb 20 00:00:17 buko /kernel: wi0: wi_cmd: busy bit won't clear.
Feb 20 00:00:18 buko last message repeated 3 times
Feb 20 00:00:18 buko /kernel: wi0: init failed
Feb 20 00:00:18 buko /kernel: wi0: wi_cmd: busy bit won't clear.
Feb 20 00:00:18 buko last message repeated 22 times
Feb 20 00:00:18 buko /kernel: wi0: failed to allocate 1594 bytes on NIC
Feb 20 00:00:22 buko /kernel: wi0: tx buffer allocation failed
Feb 20 00:00:22 buko /kernel: wi0: wi_cmd: busy bit won't clear.
Feb 20 00:00:23 buko /kernel: wi0: failed to allocate 1594 bytes on NIC 

Neil Camara writes: 

> Hey guys,  
> 
> Here is an update regarding upgrade of my flash in Netgear MA311.
> I used WinUpdate. I downloaded the 1.5.6 firmware for my FreeBSD 
> 4.9-STABLE.
> The upgrade was successful.  
> 
> 1.) This is what it reports by ifconfig  
> 
> wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>       inet6 fe80::209:5bff:fe67:8177%wi0 prefixlen 64 scopeid 0x3
>       inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
>       ether 00:09:5b:67:81:77
>       media: IEEE 802.11 Wireless Ethernet DS/11Mbps <hostap>
>       status: associated
>       ssid FBSD_AP 1:FBSD_AP
>       stationname v1rtu0s1ty_AP
>       channel 6 authmode OPEN powersavemode OFF powersavesleep 100
>       wepmode MIXED weptxkey 1
>       wepkey 1:128-bit wepkey 2:128-bit wepkey 3:128-bit wepkey 4:128-bit  
> 
> 2.) This is what is reported by cat /var/run/dmesg.boot|grep wi0  
> 
> wi0: <Intersil Prism2.5> mem 0xfedfd000-0xfedfdfff irq 12 at device 14.0 
> on pci0
> wi0: 802.11 address: 00:09:5b:67:81:77
> wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
> wi0: Intersil Firmware: Primary 1.01.01, Station 1.05.06  
> 
> 3.) This is the report from wicontrol  
> 
> NIC serial number:                      [ 99SA01000000 ]
> Station name:                           [ v1rtu0s1ty_AP ]
> SSID for IBSS creation:                 [ FBSD_AP ]
> Current netname (SSID):                 [ FBSD_AP ]
> Desired netname (SSID):                 [ FBSD_AP ]
> Current BSSID:                          [ 00:09:5b:67:81:77 ]
> Channel list:                           [ 2047 ]
> IBSS channel:                           [ 6 ]
> Current channel:                        [ 6 ]
> Comms quality/signal/noise:             [ 0 81 27 ]
> Promiscuous mode:                       [ Off ]
> Process 802.11b Frame:                  [ Off ]
> Intersil-Prism2 based card:             [ 1 ]
> Port type (1=BSS, 3=ad-hoc):            [ 6 ]
> MAC address:                            [ 00:09:5b:67:81:77 ]
> TX rate (selection):                    [ 11 ]
> TX rate (actual speed):                 [ 2 ]
> RTS/CTS handshake threshold:            [ 2347 ]
> Create IBSS:                            [ Off ]
> Access point density:                   [ 1 ]
> Power Mgmt (1=on, 0=off):               [ 0 ]
> Max sleep time:                         [ 100 ]
> WEP encryption:                         [ On ]
> TX encryption key:                      [ 1 ]
> Encryption keys:  
> 
> Now, I'm experiencing really worst connection. After connecting to my 
> local ftp server and download a sample file, I lost my connection. I went 
> directly and opened up my /var/log/messages. Below are the logs. I feel 
> like reverting back to P 1.0.7  S 1.3.6. :(  
> 
> But anyways, what are the fixes for the errors below? I just hope my card 
> isn't toast. FYI, I only uploaded P and S.  
> 
> Any help will be greatly appreciated.  
> 
> Thanks.  
> 
> 
> /var/log/messages
> -----------------
> Feb 20 00:10:56 buko /kernel: wi0: xmit failed
> Feb 20 00:10:56 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:10:56 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:10:56 buko /kernel: wi0: xmit failed
> Feb 20 00:10:56 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:10:56 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:10:56 buko /kernel: wi0: xmit failed
> Feb 20 00:10:56 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:10:56 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:10:56 buko /kernel: wi0: xmit failed
> Feb 20 00:10:56 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:10:56 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:10:56 buko /kernel: wi0: xmit failed
> Feb 20 00:11:01 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:11:01 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:11:01 buko /kernel: wi0: xmit failed
> Feb 20 00:11:01 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:11:01 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:11:01 buko /kernel: wi0: xmit failed
> Feb 20 00:11:10 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:11:10 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:11:10 buko /kernel: wi0: xmit failed
> Feb 20 00:11:10 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:11:10 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:11:10 buko /kernel: wi0: xmit failed
> Feb 20 00:11:10 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:11:10 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:11:10 buko /kernel: wi0: xmit failed
> Feb 20 00:11:20 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:11:20 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:11:20 buko /kernel: wi0: xmit failed
> Feb 20 00:11:20 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:11:20 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:11:20 buko /kernel: wi0: xmit failed
> Feb 20 00:11:20 buko /kernel: wi0: watchdog timeout
> Feb 20 00:11:20 buko /kernel: wi0: timeout in wi_seek to 0/0; last status 
> 4000
> Feb 20 00:11:20 buko /kernel: wi0: timeout in wi_seek to 0/3c; last status 
> 403c
> Feb 20 00:11:20 buko /kernel: wi0: xmit failed 
> _______________________________________________
> freebsd-mobile@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org"
 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040220062846.2504.qmail>