Date: Sun, 27 Jun 2004 19:08:00 -0700 From: "Bryce Alexander" <bryce@xanthworld.com> To: <freebsd-mobile@freebsd.org> Subject: RE: Gateway Laptop won't recognize wi0: or an0: Wifi Cards - more info Message-ID: <001d01c45cb4$bd36a440$80371e0a@zeus> In-Reply-To: <006301c45bcb$17ac40f0$80371e0a@zeus>
next in thread | previous in thread | raw e-mail | index | archive | help
Since the multicard reader that I have is not listed as being supported
I recompiled my kernel without the umass support, this dropped the
reader into the ugen device, which is probably a better place for it
right now anyway.
Even so I cannot get the pcmcia wifi cards to be recognized, here is my
dmesg with a Netgear MA401 inserted:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.10-RELEASE #1: Sat Jun 26 22:09:20 MST 2004
root@orion.azlab.net:/usr/src/sys/compile/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Mobile Intel(R) Celeron(R) CPU 2.20GHz (2191.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,
CMOV,P
AT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 258867200 (252800K bytes)
avail memory = 247291904 (241496K bytes)
Preloaded elf kernel "kernel" at 0xc04af000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdf40
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x3584) at 0.1
pci0: <unknown card> (vendor=0x8086, dev=0x3585) at 0.3
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0x1800-0x1807 mem
0xe0000
000-0xe007ffff,0xe8000000-0xefffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <unknown card> (vendor=0x8086, dev=0x3582) at 2.1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f
irq 11 at
device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f
irq 11 at
device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ugen0: Ltd Winter Ver1.3, rev 1.10/0.05, addr 2
pci0: <USB controller> at 29.7 irq 10
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on
pci0
pci2: <PCI bus> on pcib1
pcic0: <O2micro 6912 PCI-Cardbus Bridge> irq 128 at device 2.0 on pci2
pcic0: PCI Memory allocated: 0x88000000
pcic0: No PCI interrupt routed, trying ISA.
pcic0: Polling mode
pcic0: Warning: O2micro OZ68xx chips may not work
pccard0: <PC Card 16-bit bus (classic)> on pcic0
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x3000-0x303f mem
0xe02000
00-0xe0200fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:e0:b8:55:2e:14
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port
0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0
x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x24c5) at 31.5 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x24c6) at 31.6 irq 10
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 1
orm0: <Option ROMs> at iomem
0xcc800-0xcdfff,0xdf800-0xdffff,0xe0000-0xe3fff on
isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata0-master UDMA100
acd0: CD-RW <QSI CD-RW/DVD-ROM SBW-242> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
$ ifconfig -a
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.30.55.126 netmask 0xffffff00 broadcast 10.30.55.255
ether 00:e0:b8:55:2e:14
media: Ethernet autoselect (10baseT/UTP)
status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
-----Original Message-----
From: owner-freebsd-mobile@freebsd.org
[mailto:owner-freebsd-mobile@freebsd.org] On Behalf Of Bryce Alexander
Sent: Saturday, June 26, 2004 3:16 PM
To: freebsd-mobile@freebsd.org
Subject: Gateway Laptop won't recognize wi0: or an0: Wifi Cards
There may be a couple of problems causing a conflict.
I just loaded FreeBSD 4.10 on this laptop, this is the first time I have
been able to get any version to install because previous versions would
get a kernel panic when the distribution disk was booting.
Now instead of a panic I get:
Umass0: BBB Reset Failed, stalled (message repeats five times), then
just after that I get
Pccard: card inserted, slot 0
And it begins mounting ufs.
When I do an ifconfig -a the Pccard WiFi is not listed. I have tried a
Netgear MA401, Cisco Aironet 350, and an Orinoco Gold, all with the same
results.
I suspect that the Umass0: is enabled due to a multi memory card reader
built into the laptop, and that the reader was the cause of previous
kernel panics with earlier versions.
So is the memory card reader not responding as expected stomping on
something that is needed for the pccard or am I just missing something
basic and getting myself confused? Clearly I would like to get both
working correctly, but I would be happy getting a WiFi card to work.
_______________________________________________
freebsd-mobile@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to
"freebsd-mobile-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001d01c45cb4$bd36a440$80371e0a>